Created attachment 1378842 [details] screenshot of the console showing kernel panic Centos6 host machine, with a Fedora KVM virtual machine. The VM has worked properly up to and including 4.14.8-300.fc27. Yum updated it to 4.14.11-300.fc27, which panics very early in the boot process. How reproducible: 100% Steps to Reproduce: 1. Build a Fedora VM in a Centos6 host machine 2. Yum update to latest 4.14.11-300.fc27 kernel 3. panic Actual results: panic Expected results: should boot and run normally Additional info: screen shot attached. Booting the 4.14.8-300.fc27 kernel from the grub menu works.
Can you boot the guest with nopti and see if that makes a difference?
That works. Thanks!
Thanks for testing. Fixes for KPTI are still trickling in. Fedora hasn't pushed 4.14.12 yet and 4.14.13 is due to come out on Wednesday so I think testing that would be a good first step before reporting this further.
https://bodhi.fedoraproject.org/updates/FEDORA-2018-21a7ad920c can you please test this kernel update and see if it boots as expected?
4.14.13-300 still fails to boot. It does work with nopti added to the kernel boot line.
Reported upstream, can you attach a full console log via the VM serial console?
[ 2.057291] PANIC: double fault, error_code: 0x0 [ 2.058031] CPU: 1 PID: 56 Comm: modprobe Not tainted 4.14.13-300.fc27.x86_64 #1 [ 2.058031] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 2.058031] task: ffff8b1db8d18000 task.stack: ffffacb6404d0000 [ 2.058031] RIP: 0010:vprintk_default+0x5/0x30 [ 2.058031] RSP: 0000:fffffe000002e000 EFLAGS: 00010046 [ 2.058031] RAX: 0000000000000000 RBX: fffffe000002e118 RCX: 0000000000000001 [ 2.058031] RDX: 0000000000000000 RSI: fffffe000002e018 RDI: ffffffff840715a0 [ 2.058031] RBP: fffffe000002e008 R08: ffffffff840bb565 R09: ffffffff8407159b [ 2.058031] R10: fffffe000002e080 R11: 0000000000000000 R12: ffffffff84070fdd [ 2.058031] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.058031] FS: 0000000000000000(0000) GS:ffff8b1dbfd00000(0000) knlGS:0000000000000000 [ 2.058031] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.058031] CR2: fffffe000002dff8 CR3: 0000000078e4c000 CR4: 00000000000006e0 [ 2.058031] Call Trace: [ 2.058031] <ENTRY_TRAMPOLINE> [ 2.058031] ? vprintk_func+0x27/0x60 [ 2.058031] printk+0x52/0x6e [ 2.058031] __die+0x6b/0xe0 [ 2.058031] die+0x2f/0x50 [ 2.058031] do_general_protection+0x149/0x160 [ 2.058031] general_protection+0x2c/0x60 [ 2.058031] RIP: 0010:swapgs_restore_regs_and_return_to_usermode+0x6f/0x80 [ 2.058031] RSP: 0000:fffffe000002e1c8 EFLAGS: 00000006 [ 2.058031] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.058031] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000078e4d800 [ 2.058031] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 2.058031] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 2.058031] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.058031] </ENTRY_TRAMPOLINE> [ 2.058031] Code: eb 01 e8 ef 9c 7a 00 e8 1a 23 06 00 e8 b5 19 06 00 83 fb ff 75 e4 8b 5d c8 e9 d2 fc ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <55> 49 89 f8 49 89 f1 31 c9 31 d2 be ff ff ff ff 48 89 e5 31 ff [ 2.058031] Kernel panic - not syncing: Machine halted. [ 2.058031] Kernel Offset: 0x2000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2.058031] ---[ end Kernel panic - not syncing: Machine halted.
Thanks for the panic. Can you give the rest of the console log as well?
I am not sure how to get that. From a bash prompt, I "virsh console vpn25". From virt-manager, I add "console=tty0 console=ttyS0" to the kernel line and boot. The console output starts with the PANIC line. [root@xx log]# virsh console vpn25 Connected to domain vpn25 Escape character is ^] [ 1.705175] PANIC: double fault, error_code: 0x0 [ 1.706055] CPU: 1 PID: 56 Comm: modprobe Not tainted 4.14.13-300.fc27.x86_64 #1 .....
Can you try removing quiet from the kernel command line? That usually gets added to most standard installs.
Ah, that gives a bit more: virsh console vpn25 Connected to domain vpn25 Escape character is ^] [ 0.000000] Linux version 4.14.13-300.fc27.x86_64 (mockbuild.fedoraproject.org) (gcc version 7.2.1 20170915 (Red Hat 7.2.1-2) (GCC)) #1 SMP Thu Jan 11 04:00:01 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.13-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb LANG=en_US.UTF-8 console=tty0 console=ttyS0 [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fffcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fffd000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffbc000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Using PIT calibration value [ 0.000000] e820: last_pfn = 0x7fffd max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT MSR is 0, disabled. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at [ffffffffff200a30] [ 0.000000] RAMDISK: [mem 0x356e3000-0x36b69fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FD9E0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFFD5D0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFFFE20 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFFD910 0024A2 (v01 BXPC BXDSDT 00000001 INTL 20090123) [ 0.000000] ACPI: FACS 0x000000007FFFFDC0 000040 [ 0.000000] ACPI: SSDT 0x000000007FFFD810 0000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x000000007FFFD720 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x000000007FFFD610 00010F (v01 BXPC BXSSDTPC 00000001 INTL 20090123) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffcfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7ffd2000-0x7fffcfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:7ffc2001, primary cpu clock [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007fffcfff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fffcfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffcfff] [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfffbbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ffff891f7fc00000 s139672 r8192 d32360 u1048576 [ 0.000000] kvm-stealtime: cpu 0, msr 7fc16240 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515972 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.13-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb LANG=en_US.UTF-8 console=tty0 console=ttyS0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 2018548K/2096740K available (12300K kernel code, 1546K rwdata, 3728K rodata, 2108K init, 1364K bss, 78192K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 35499 entries in 139 pages [ 0.001000] Hierarchical RCU implementation. [ 0.001000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2. [ 0.001000] Tasks RCU enabled. [ 0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.001000] NR_IRQS: 65792, nr_irqs: 440, preallocated irqs: 16 [ 0.001000] Offload RCU callbacks from CPUs: . [ 0.001000] Console: colour VGA+ 80x25 [ 0.001000] console [tty0] enabled [ 0.001000] console [ttyS0] enabled [ 0.001029] tsc: Detected 3192.954 MHz processor [ 0.003140] Calibrating delay loop (skipped) preset value.. 6385.90 BogoMIPS (lpj=3192954) [ 0.005015] pid_max: default: 32768 minimum: 301 [ 0.007065] ACPI: Core revision 20170728 [ 0.012257] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.014182] Security Framework initialized [ 0.016033] Yama: becoming mindful. [ 0.018023] SELinux: Initializing. [ 0.027871] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.033417] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.035181] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.037117] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.040551] Disabled fast string operations [ 0.042121] mce: CPU supports 10 MCE banks [ 0.044238] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.046011] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.048013] Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline [ 0.051181] Freeing SMP alternatives memory: 36K [ 0.056600] smpboot: Max logical packages: 2 [ 0.062819] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063000] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1) [ 0.065264] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.067283] Hierarchical SRCU implementation. [ 0.071996] NMI watchdog: Perf event create on CPU 0 failed with -2 [ 0.073011] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.075272] smp: Bringing up secondary CPUs ... [ 0.078795] x86: Booting SMP configuration: [ 0.079021] .... node #0, CPUs: #1 [ 0.001000] kvm-clock: cpu 1, msr 0:7ffc2041, secondary cpu clock [ 0.001000] Disabled fast string operations [ 0.111083] kvm-stealtime: cpu 1, msr 7fd16240 [ 0.117019] smp: Brought up 1 node, 2 CPUs [ 0.118023] smpboot: Total of 2 processors activated (12771.81 BogoMIPS) [ 0.125008] devtmpfs: initialized [ 0.127172] x86/mm: Memory block size: 128MB [ 0.130505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.132028] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.134409] pinctrl core: initialized pinctrl subsystem [ 0.137427] RTC time: 21:17:11, date: 01/12/18 [ 0.139903] NET: Registered protocol family 16 [ 0.143042] cpuidle: using governor menu [ 0.147760] ACPI: bus type PCI registered [ 0.149005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.152346] PCI: Using configuration type 1 for base access [ 0.159292] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.163359] ACPI: Added _OSI(Module Device) [ 0.165008] ACPI: Added _OSI(Processor Device) [ 0.166017] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.168006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.175536] ACPI: Interpreter enabled [ 0.177039] ACPI: (supports S0 S5) [ 0.179008] ACPI: Using IOAPIC for interrupt routing [ 0.180064] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.183000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.193781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.194025] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.195023] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.196033] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.199739] acpiphp: Slot [1] registered [ 0.200107] acpiphp: Slot [2] registered [ 0.201078] acpiphp: Slot [3] registered [ 0.202073] acpiphp: Slot [4] registered [ 0.204013] acpiphp: Slot [5] registered [ 0.205076] acpiphp: Slot [6] registered [ 0.206100] acpiphp: Slot [7] registered [ 0.207071] acpiphp: Slot [8] registered [ 0.208091] acpiphp: Slot [9] registered [ 0.210017] acpiphp: Slot [10] registered [ 0.212048] acpiphp: Slot [11] registered [ 0.213108] acpiphp: Slot [12] registered [ 0.214000] acpiphp: Slot [13] registered [ 0.214088] acpiphp: Slot [14] registered [ 0.215092] acpiphp: Slot [15] registered [ 0.216079] acpiphp: Slot [16] registered [ 0.218037] acpiphp: Slot [17] registered [ 0.219080] acpiphp: Slot [18] registered [ 0.221066] acpiphp: Slot [19] registered [ 0.222077] acpiphp: Slot [20] registered [ 0.223073] acpiphp: Slot [21] registered [ 0.224076] acpiphp: Slot [22] registered [ 0.226014] acpiphp: Slot [23] registered [ 0.227086] acpiphp: Slot [24] registered [ 0.229032] acpiphp: Slot [25] registered [ 0.231030] acpiphp: Slot [26] registered [ 0.232128] acpiphp: Slot [27] registered [ 0.233076] acpiphp: Slot [28] registered [ 0.235139] acpiphp: Slot [29] registered [ 0.236089] acpiphp: Slot [30] registered [ 0.237071] acpiphp: Slot [31] registered [ 0.239000] PCI host bridge to bus 0000:00 [ 0.239013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.240028] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.242032] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.244010] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.245011] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.253711] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.254015] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.255019] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.256014] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.262301] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.263059] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.326959] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.328155] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.330160] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.332163] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.334046] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.339070] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.340000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.340020] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.341006] vgaarb: loaded [ 0.345077] SCSI subsystem initialized [ 0.348291] ACPI: bus type USB registered [ 0.350196] usbcore: registered new interface driver usbfs [ 0.352048] usbcore: registered new interface driver hub [ 0.355022] usbcore: registered new device driver usb [ 0.358186] EDAC MC: Ver: 3.0.0 [ 0.362305] PCI: Using ACPI for IRQ routing [ 0.367116] NetLabel: Initializing [ 0.368008] NetLabel: domain hash size = 128 [ 0.369010] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.371093] NetLabel: unlabeled traffic allowed by default [ 0.374249] clocksource: Switched to clocksource kvm-clock [ 0.441047] VFS: Disk quotas dquot_6.6.0 [ 0.446519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.454161] pnp: PnP ACPI init [ 0.460204] pnp: PnP ACPI: found 5 devices [ 0.487183] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.500887] NET: Registered protocol family 2 [ 0.512619] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.524218] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.532472] TCP: Hash tables configured (established 16384 bind 16384) [ 0.540296] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.552314] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.561106] NET: Registered protocol family 1 [ 0.567117] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.574096] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.586198] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.593935] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.606572] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.622820] Unpacking initramfs... [ 2.335287] Freeing initrd memory: 21020K [ 2.344531] audit: initializing netlink subsys (disabled) [ 2.351390] audit: type=2000 audit(1515791833.710:1): state=initialized audit_enabled=0 res=1 [ 2.352623] Initialise system trusted keyrings [ 2.352714] Key type blacklist registered [ 2.353238] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 2.359953] zbud: loaded [ 2.910025] PANIC: double fault, error_code: 0x0 [ 2.910025] CPU: 1 PID: 56 Comm: modprobe Not tainted 4.14.13-300.fc27.x86_64 #1 [ 2.910025] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 2.910025] task: ffff891f78dc3c00 task.stack: ffffa6eac0594000 [ 2.910025] RIP: 0010:vprintk_default+0x5/0x30 [ 2.910025] RSP: 0000:fffffe000002e000 EFLAGS: 00010046 [ 2.910025] RAX: 0000000000000000 RBX: fffffe000002e118 RCX: 0000000000000001 [ 2.910025] RDX: 0000000000000000 RSI: fffffe000002e018 RDI: ffffffffbe0715a0 [ 2.910025] RBP: fffffe000002e008 R08: ffffffffbe0bb565 R09: ffffffffbe07159b [ 2.910025] R10: fffffe000002e080 R11: 0000000000000000 R12: ffffffffbe070fdd [ 2.910025] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.910025] FS: 0000000000000000(0000) GS:ffff891f7fd00000(0000) knlGS:0000000000000000 [ 2.910025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.910025] CR2: fffffe000002dff8 CR3: 0000000078da6000 CR4: 00000000000006e0 [ 2.910025] Call Trace: [ 2.910025] <ENTRY_TRAMPOLINE> [ 2.910025] ? vprintk_func+0x27/0x60 [ 2.910025] printk+0x52/0x6e [ 2.910025] __die+0x6b/0xe0 [ 2.910025] die+0x2f/0x50 [ 2.910025] do_general_protection+0x149/0x160 [ 2.910025] general_protection+0x2c/0x60 [ 2.910025] RIP: 0010:swapgs_restore_regs_and_return_to_usermode+0x6f/0x80 [ 2.910025] RSP: 0000:fffffe000002e1c8 EFLAGS: 00000006 [ 2.910025] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.910025] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000078da7800 [ 2.910025] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 2.910025] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 2.910025] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.910025] </ENTRY_TRAMPOLINE> [ 2.910025] Code: eb 01 e8 ef 9c 7a 00 e8 1a 23 06 00 e8 b5 19 06 00 83 fb ff 75 e4 8b 5d c8 e9 d2 fc ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <55> 49 89 f8 49 89 f1 31 c9 31 d2 be ff ff ff ff 48 89 e5 31 ff [ 2.910025] Kernel panic - not syncing: Machine halted. [ 2.910025] Kernel Offset: 0x3c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2.910025] ---[ end Kernel panic - not syncing: Machine halted.
Can you boot with nopti and post the output of: $ cat /proc/cpuinfo from inside the VM?
I'm quite confident that we'll find that pcid is not in the list of features. The kernel code is bogus, as described in the lkml thread. Your kernel is dying here: .Lwrcr3_\@: /* Flip the PGD and ASID to the user version */ orq $(PTI_SWITCH_MASK), \scratch_reg mov \scratch_reg, %cr3 as expected, since the code in question is wrong.
cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Common KVM processor stepping : 1 microcode : 0x1 cpu MHz : 3192.954 cache size : 4096 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx lm constant_tsc nopl cpuid pni cx16 hypervisor retpoline bugs : cpu_meltdown spectre_v1 spectre_v2 bogomips : 6385.90 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Common KVM processor stepping : 1 microcode : 0x1 cpu MHz : 3192.954 cache size : 4096 KB physical id : 1 siblings : 1 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx lm constant_tsc nopl cpuid pni cx16 hypervisor retpoline bugs : cpu_meltdown spectre_v1 spectre_v2 bogomips : 6385.90 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management:
https://koji.fedoraproject.org/koji/taskinfo?taskID=24181514 Can you test this scratch build, it has a proposed fix.
That one works - boots normally with no manual additions to the kernel args. Thanks!
I'm getting this too on a fedora 26 guest in an ovirt 3.4 environment, kernel version for guest - 4.14.13-200 However, this kernel works ok for guests on a hosting server with this cpu signature:- Signature: Type 0, Family 6, Model 44, Stepping 2 (X5650, Dell Poweredge r710) The problem hosting server cpu being:- Signature: Type 0, Family 6, Model 15, Stepping 7 (X5355, Dell Poweredge 2950) Thanks... Jonny
kernel-4.14.14-300.fc27 has been submitted as an update to Fedora 27. https://bodhi.fedoraproject.org/updates/FEDORA-2018-262eb7c289
kernel-4.14.14-200.fc26 has been submitted as an update to Fedora 26. https://bodhi.fedoraproject.org/updates/FEDORA-2018-8dc60a4feb
kernel-4.14.14-200.fc26 has been pushed to the Fedora 26 testing repository. If problems still persist, please make note of it in this bug report. See https://fedoraproject.org/wiki/QA:Updates_Testing for instructions on how to install test updates. You can provide feedback for this update here: https://bodhi.fedoraproject.org/updates/FEDORA-2018-8dc60a4feb
kernel-4.14.14-300.fc27 has been pushed to the Fedora 27 testing repository. If problems still persist, please make note of it in this bug report. See https://fedoraproject.org/wiki/QA:Updates_Testing for instructions on how to install test updates. You can provide feedback for this update here: https://bodhi.fedoraproject.org/updates/FEDORA-2018-262eb7c289
Hi all, kernel-4.14.14-200.fc26 works for me now on Ovirt guest (X5355 intel Xeon, dell poweredge 2950 hosting server) after kernel panic on 4.14.11-200.fc26 and 4.14.13-200.fc26. pti and retpoline present in cat /etc/cpuinfo... Thanks everyone! Jonny
kernel-4.14.14-200.fc26 has been pushed to the Fedora 26 stable repository. If problems still persist, please make note of it in this bug report.
kernel-4.14.14-300.fc27 has been pushed to the Fedora 27 stable repository. If problems still persist, please make note of it in this bug report.
I'm also having a similar problem on 27. I log into KDE then my laptop touchpad stops working and that this error pops up. My mouse does not get to work until another restart, but the same keeps happening. I resort to a usb mouse. BOOT_IMAGE=/vmlinuz-4.14.14-300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8