From Bugzilla Helper: User-Agent: Mozilla/5.0 (X11; U; Linux i686; fr-FR; rv:1.7.6) Gecko/20050328 Fedora/1.7.6-1.2.5 Description of problem: The system habgs during the Hardware detection on SATA_SIL module with ATI Chipset RS480 Version-Release number of selected component (if applicable): How reproducible: Always Steps to Reproduce: 1.boot on the media (CD or DVD) 2.press Enter at the linux prompt 3.skip the media verification (more faster ;-) ) 4.the system hangs after 30 seconds Actual Results: Impossibility installation of Fedora core4 Test 2 with the ATI chipset Expected Results: Fixe this issue before the final release of FC4, or a workarround to solve this issue (new cd installation) Additional info: The motherboard come from MSI with AMD CPU ChipSet ATI RS480 with 2 Sata controler Vendor id 0x1002 pnp id's 0x4379 and 0437a This pnp is not present on the pcitable At the prompt if I type linux noprobe the system continue, I choose manualy the Sata Controler (SATA_SIL) but the system doesn't detect my seagate hard drive (200Go)
*** Bug 155752 has been marked as a duplicate of this bug. ***
*** Bug 155753 has been marked as a duplicate of this bug. ***
Do you have any news about this issue ? If you need may hardware support, please contact me. Thanks your support Armel
Good afternoon, I check the current bug on the FC4 Test 3 and it's present, no solve. During the boot, the system check SATA_SIL driver and he doesn't detect the Sata Hard Drive. I check with 2 differents Hard Drive (Maxtor 300 Go and Segeate 40Go) same think. Please help me, I receive some motherboard with this chipset and it's impssible I install Fedore on it. If you need some think about this issue, please contact me. Have a nice day
Good Afternoon, I continue my investigation about this bug, and I have a good news : The Sata Controler with the 0x4379 works fine (it's the second Sata controler), and I install FC4 Test 3 but the first controler (0x437a) the hard drive on this controler doesn't appear, please read below the result with lspci command : 00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34 00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 10) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device 4370 (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5954 02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 02:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70 03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 03:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) All informations come from ATI RS480 system Is it possible you fixe the issue now. Best regards Armelk
Good Morning, I install the Kernel Source (kernel-2.6.11-1.1305_FC4.src.rpm) and I check into the SATA_SIL.c, the 0x437a is missing. I copy below the source about this issue : static struct pci_device_id sil_pci_tbl[] = { { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; Is it possible you implement into this file this line avout the 1st ATI RS480 SATA. { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, I hope you have a time to modifie this driver for the final version. My second controler works fine, but the 1st doesn't detect my HDD Thanks again for your support Best regards Armel
fixed in CVS, will be in a build soon.
Mass update for bugs reported against -test: Updating version field to FC4 final. Please retest with final FC4 release if you have not already done so. Thanks.
Mass update of -test bugs to update version to fc4. (Please retest on final release, and report results if you have not already done so). Thanks.
Hi Dave, sorry for my late feedback. Great news, the system works fine with this chipset(Installationwith CD or NFS), please close it. Again, thanks for your support Armelk
Hi, I am running the following system : Seagate Barracuda SATA hard drive 120 GB 512 MB DDR RAM 16x DVD drive AMD AThlon 64 3200+ Motherboard MSI RS480 Fedora Core 4 installation hangs on my PC while installing sata_sil. When my drive is connected to SATA 1 or 2, I get a message : "Disabling IRQ 10" and then the pc hangs. When connected to SATA 3 or 4, the pc hangs while trying to install sata_sil. I have the latest release of Fedora Core and am intalling a fresh copy from a DVD. Thanking you, Abhijit