Description of problem: The current unit value for slabsize under VDO volume section is set as "xxGB" which is not recognized and errors out. Need to set it as " xxG" Version-Release number of selected component (if applicable): gdeploy-2.0.2-22.el7rhgs.noarch cockpit-ovirt-dashboard-0.11.17-1.el7ev.noarch cockpit-dashboard-160-3.el7.x86_64 How reproducible: 100% Steps to Reproduce: 1.Start RHHI installation with cockpit, selecting 'Hosted Engine with Gluster' 2.Fails when it comes to VDO section since the unit for slabsize if not recognized Actual results: Fails since the unit is not recognized Expected results: Should not fail Additional info: How the parameters are currently: [vdo1:10.70.36.241] action=create names=data devices=sdb logicalsize=200000G blockmapcachesize=128M readcache=enabled readcachesize=20M emulate512=enabled writepolicy=sync ignore_vdo_errors=no slabsize=32GB How it should be: [vdo1:10.70.36.241] action=create names=data devices=sdb logicalsize=200000G blockmapcachesize=128M readcache=enabled readcachesize=20M emulate512=enabled writepolicy=sync ignore_vdo_errors=no slabsize=32G
As the dependent bug is ON_QA, moving this bug to ON_QA. @Sahina, please provide the devel_ack on this bug
Tested with the following-: 1. RedHat-release-virtualization-host-4.2-2.1.el7.x86_64 2. Cockpit-ovirt-dashboard-0.11.20-1 3. gdeploy-2.0.2-19.el7rhgs.noarch Following are the steps performed for testing:- 1. Login to the cockpit UI and configure all tabs required for gluster deployment. 2.Before deployment verified the gdeploy config file in the reveiw tab and could successfully see the parameter 'slabsize' as 'XG'.