Description of problem: ----------------------- RHHI setup uses 2 network interface, one for ovirtmgmt and other for gluster. After gluster configuration and HE deployment is completed from cockpit, the gluster network interface configuration file is edited by vdsm and that doesn't adds 'BOOTPROTO=dhcp' Version-Release number of selected component (if applicable): -------------------------------------------------------------- RHV 4.2 How reproducible: ----------------- Few times Steps to Reproduce: -------------------- 1. Complete RHHI deployment - Gluster configuration & HE deployment from cockpit 2. Check for the network configuration file for the interface allocated to the gluster network Actual results: --------------- Network configured via dhcp never comes up Expected results: ----------------- Network interface configured with dhcp should be up Additional info: ---------------- Here is the network configuration file created by vdsm but missing BOOTPROTO # Generated by VDSM version 4.20.30-1.el7ev DEVICE=enp3s0f0 ONBOOT=yes MTU=1500 NM_CONTROLLED=no
Closing as the dependent bz has been closed. Please re-open both if the problem persists and requested data is available.
This issue is no longer seen with RHHI-V 1.8 based on RHVH 4.4.1