+++ This bug was initially created as a clone of Bug #1602261 +++ Description of problem: Currently in RHHI, when thinpool and VDO(compression and deduplication) are enabled for a device it affects the discard functionality. Basically the thinpool has minimum 64kb size discard set and VDO has its default as 4kb. Since thinp falls above VDO in RHHI stack , it disables the discard passdown. This bug is raised to make sure the thinp is disabled, so that the VDO max_discard_sectors=4 is enabled. Version-Release number of selected component (if applicable): cockpit-ovirt-dashboard-0.11.30-1.el7ev.noarch ansible-2.6.1-1.el7ae.noarch gdeploy-2.0.2-27.el7rhgs.noarch vdo-6.1.0.168-18.x86_64 kmod-kvdo-6.1.0.171-17.el7_5.x86_64 How reproducible: 100% Steps to Reproduce: 1. 2. 3. Actual results: Expected results: Additional info: This is raised based on the bug 1600156
Verified the bug on cockpit-ovirt-0.11.31-1. Attaching the screenshot from cockpit Steps: ==== 1.Start the gluster deployment 2.Move towards the brick tab and check the enable compression and deduplication checkbox 3.The thinpool gets unchecked for that device 4.Complete the deployment and the VDO device is created without thinp CLI output: ========== sdb 8:16 0 20T 0 disk └─vdo_sdb 253:14 0 50.8T 0 vdo ├─gluster_vg_sdb-gluster_lv_engine 253:19 0 100G 0 lvm /gluster_bricks/engine ├─gluster_vg_sdb-gluster_lv_data 253:20 0 1000G 0 lvm /gluster_bricks/data └─gluster_vg_sdb-gluster_lv_vmstore 253:21 0 4T 0 lvm /gluster_bricks/vmstore
Created attachment 1470494 [details] Cockpit_UI_Verified
This bugzilla is included in oVirt 4.2.5 release, published on July 30th 2018. Since the problem described in this bug report should be resolved in oVirt 4.2.5 release, it has been closed with a resolution of CURRENT RELEASE. If the solution does not work for you, please open a new bug report.