Sorry Beth, As we discuss on a long mail thread, I am not the right QE for the verification of this BZ.
just havent close duped it yet, I was holding off though, becuase I 1634838 was public facing and was going to close it when the work was done here
*** Bug 1634838 has been marked as a duplicate of this bug. ***
Hi Jeff, Could you please help verify this bug? Thanks!
Verified on RHEL-8.0.0-20180213.0 (Snapshot 6.0) by iPXE booting a virtual machine. The host system was configured as a PXE server (DHCP + TFTP) for the guests. [root@localhost ~]# rpm -qa ipxe\* ipxe-roms-20181214-1.git133f4c47.el8.noarch ipxe-bootimgs-20181214-1.git133f4c47.el8.noarch ipxe-roms-qemu-20181214-1.git133f4c47.el8.noarch [root@localhost ~]# virsh net-dumpxml default ... <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254'/> <bootp file='pxelinux/pxelinux.0'/> </dhcp> </ip> ... [root@localhost ~]# ls /var/lib/tftpboot/pxelinux/pxelinux.0 /var/lib/tftpboot/pxelinux/pxelinux.0 [root@localhost ~]# cat /var/lib/tftpboot/pxelinux/pxelinux.cfg/default default kickstart label kickstart linux ../RHEL-8.0.0-20190213.0/vmlinuz append initrd=../RHEL-8.0.0-20190213.0/initrd.img ks=http://192.168.122.1/kickstart/ks-rhel800-snap6.cfg console=ttyS0,9600 [root@localhost ~]# virt-install \ --name rhel8 \ --memory 4096 \ --vcpus 2 \ --boot network,hd,useserial=on,menu=on \ --rng /dev/random \ --disk /var/lib/libvirt/images/rhel8.qcow2,bus=virtio,format=qcow2,size=20 \ --network network=default,model=virtio \ --graphics none \ --noautoconsole \ --serial file,path=/var/tmp/rhel8-serial.out \ --pxe WARNING No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results. Starting install... Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@localhost ~]# tail -f /var/tmp/rhel8-serial.out Google, Inc. Serial Graphics Adapter 12/14/18 SGABIOS $Id$ (mockbuild@) Fri Dec 14 14:55:54 UTC 2018 Term: 80x24 4 0 SeaBIOS (version 1.11.1-3.module+el8+2529+a9686a4d) Machine UUID 398c0503-4ae6-491f-8103-74ff3e33e7fb iPXE (http://ipxe.org) 00:02.0 C100 PCI2.10 PnP PMM+BFF911D0+BFED11D0 C100 Press Ctrl-B to configure iPXE (PCI 00:02.0)... Press ESC for boot menu. Booting from ROM... iPXE (PCI 00:02.0) starting execution...ok iPXE initialising devices...ok iPXE 1.0.0+ -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP iSCSI TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Press Ctrl-B for the iPXE command line... net0: 52:54:00:7d:e0:9e using virtio-net on 0000:00:02.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Configuring (net0 52:54:00:7d:e0:9e).................. ok net0: 192.168.122.182/255.255.255.0 gw 192.168.122.1 net0: fe80::5054:ff:fe7d:e09e/64 Next server: 192.168.122.1 Filename: pxelinux/pxelinux.0 tftp://192.168.122.1/pxelinux/pxelinux.0... ok pxelinux.0 : 42819 bytes [PXE-NBP] PXELINUX 6.04 PXE Copyright (C) 1994-2015 H. Peter Anvin et al Loading ../RHEL-8.0.0-20190213.0/vmlinuz... ok Loading ../RHEL-8.0.0-20190213.0/initrd.img...ok Probing EDD (edd=off to disable)... ok [ 0.000000] Linux version 4.18.0-67.el8.x86_64 (mockbuild.eng.bos.redhat.com) (gcc version 8.2.1 20180905 (Red Hat 8.2.1-3) (GCC)) #1 SMP Sat Feb 9 12:44:00 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=../RHEL-8.0.0-20190213.0/vmlinuz initrd=../RHEL-8.0.0-20190213.0/initrd.img ks=http://192.168.122.1/kickstart/ks-rhel800-snap6.cfg console=ttyS0,9600 ... ... ... Starting installer, one moment... anaconda 29.19.0.34-1.el8 for Red Hat Enterprise Linux 8.0.0 (pre-release) started. * installation log files are stored in /tmp during the installation * shell is available on TTY2 * if the graphical installation interface fails to start, try again with the inst.text bootoption to start text installation * when reporting a bug add logs from /tmp as separate text/plain attachments ... ... ... Installing libgcc.x86_64 (1/406) Installing geolite2-country.noarch (2/406) Installing geolite2-city.noarch (3/406) ... ... ...