Hide Forgot
Description of problem: The install fails after a long time because: [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Data Center name may only contain letters, numbers, '-', or '_'., Attribute: privateStoragePool.name]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Data Center name may only contain letters, numbers, '-', or '_'., Attribute: privateStoragePool.name]\". HTTP response code is 400."} when using an URI as the datacenter name. If you don't plan to support `.` in the name, then it should be validated early. As you are aware, failed installs often require full host re-install to properly cleanup. This is time consuming and Version-Release number of selected component (if applicable): latest as of May 1 2019 (4.3 I guess) How reproducible: Steps to Reproduce: 1. run ovirt-hosted-engine-setup 2. enter datacenter.example.com as name 3. wait a long time and it fails Actual results: Failed install and dirty system state. Expected results: Get a "this datacenter name isn't valid, only `-` and `_` are allowed" message early in the wizard.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "\"Invalid Data Center name format. Data Center name may only contain letters, numbers, '-', or '_'.\" \" Got datacenter.example.com\""} ovirt-ansible-hosted-engine-setup-1.0.18-1.el7ev.noarch ovirt-hosted-engine-ha-2.3.1-1.el7ev.noarch ovirt-hosted-engine-setup-2.3.8-1.el7ev.noarch Linux 3.10.0-957.12.2.el7.x86_64 #1 SMP Fri Apr 19 21:09:07 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux rhvm-appliance.x86_64 2:4.3-20190506.0.el7 Moving back to assigned.
The bug was about failing at the an early stage and not in the middle. If you gave the datacenter a name that contain a dot - it's not supported so you should get an error - this is an expected behavior. The message you attached shows that the patch has worked as expected. moving back to ON_QA for you to examine the bug.
This is not an early stage: alma03 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and will create a local VM with a running engine. The locally running engine will be used to configure a new storage domain and create a VM there. At the end the disk of the local VM will be moved to the shared storage. Are you sure you want to continue? (Yes, No)[Yes]: It has been detected that this program is executed through an SSH connection without using screen. Continuing with the installation may lead to broken installation if the network connection fails. It is highly recommended to abort the installation and run it inside a screen session using command "screen". Do you want to continue anyway? (Yes, No)[No]: yes Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20190523094642-i7j580.log Version: otopi-1.8.1 (otopi-1.8.1-1.el7ev) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup (late) [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- --== HOST NETWORK CONFIGURATION ==-- Please indicate a pingable gateway IP address [10.35.95.254]: [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (enp5s0f0) [enp5s0f0]: --== VM CONFIGURATION ==-- Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: datacenter.example.com Please enter the name of the cluster where you want to deploy this hosted-engine host. [Default]: If you want to deploy with a custom engine appliance image, please specify the path to the OVA archive you would like to use (leave it empty to skip, the setup will use rhvm-appliance rpm installing it if missing): Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [16384]: [ INFO ] Detecting host timezone. Please provide the FQDN you would like to use for the engine. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: []: nsednev-he-1.qa.lab.tlv.redhat.com Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [qa.lab.tlv.redhat.com] Enter root password that will be used for the engine appliance: Confirm appliance root password: Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: Do you want to apply a default OpenSCAP security profile (Yes, No) [No]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:7c:65:d1]: 00:16:3e:7b:b8:53 How should the engine VM network be configured (DHCP, Static)[DHCP]? Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] --== HOSTED ENGINE CONFIGURATION ==-- Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: Enter engine admin password: Confirm engine admin password: [ INFO ] Stage: Setup validation Please provide the hostname of this host on the management network [alma03.qa.lab.tlv.redhat.com]: [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Cleaning previous attempts [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_host_name if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_host_address if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "\"Invalid Data Center name format. Data Center name may only contain letters, numbers, '-', or '_'.\" \" Got datacenter.example.com\""} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20190523095527.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20190523094642-i7j580.log
Nothing had changed on latest components: ovirt-hosted-engine-ha-2.3.1-1.el7ev.noarch ovirt-hosted-engine-setup-2.3.8-1.el7ev.noarch ovirt-ansible-hosted-engine-setup-1.0.19-1.el7ev.noarch The early detection didn't shown any errors at early stage, it should've been refusing to continue right after customer's input of datacenter.example.com, while in practice deployment continued as appears bellow: alma03 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and will create a local VM with a running engine. The locally running engine will be used to configure a new storage domain and create a VM there. At the end the disk of the local VM will be moved to the shared storage. Are you sure you want to continue? (Yes, No)[Yes]: It has been detected that this program is executed through an SSH connection without using screen. Continuing with the installation may lead to broken installation if the network connection fails. It is highly recommended to abort the installation and run it inside a screen session using command "screen". Do you want to continue anyway? (Yes, No)[No]: yes Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20190529145043-8d2n0g.log Version: otopi-1.8.2 (otopi-1.8.2-1.el7ev) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup (late) [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- --== HOST NETWORK CONFIGURATION ==-- Please indicate a pingable gateway IP address [10.35.95.254]: [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (enp5s0f0) [enp5s0f0]: --== VM CONFIGURATION ==-- Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: datacenter.example.com Please enter the name of the cluster where you want to deploy this hosted-engine host. [Default]: If you want to deploy with a custom engine appliance image, please specify the path to the OVA archive you would like to use (leave it empty to skip, the setup will use rhvm-appliance rpm installing it if missing): Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [16384]: [ INFO ] Detecting host timezone. Please provide the FQDN you would like to use for the engine. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: []: nsednev-he-1.qa.lab.tlv.redhat.com Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [qa.lab.tlv.redhat.com] Enter root password that will be used for the engine appliance: Confirm appliance root password: Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: Do you want to apply a default OpenSCAP security profile (Yes, No) [No]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:44:2d:4f]: 00:16:3e:7b:b8:53 How should the engine VM network be configured (DHCP, Static)[DHCP]? Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] --== HOSTED ENGINE CONFIGURATION ==-- Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: Enter engine admin password: Confirm engine admin password: [ INFO ] Stage: Setup validation Please provide the hostname of this host on the management network [alma03.qa.lab.tlv.redhat.com]: [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Cleaning previous attempts [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_host_name if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_host_address if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "\"Invalid Data Center name format. Data Center name may only contain letters, numbers, '-', or '_'.\" \" Got datacenter.example.com\""} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20190529145427.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20190529145043-8d2n0g.log Moving back to assigned.
QA did not received ovirt-hosted-engine-setup-2.3.9 yet.
Will retest once ovirt-hosted-engine-setup-2.3.9 arrives.
[ INFO ] skipping: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (enp5s0f0) [enp5s0f0]: --== VM CONFIGURATION ==-- Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: datacenter.example.com [ ERROR ] Invalid Datacenter name format. Datacenter name may only contain letters, numbers, '-', or '_'. Please enter the name of the datacenter where you want to deploy this hosted-engine host. [Default]: Works for me on these components: ovirt-hosted-engine-ha-2.3.1-1.el7ev.noarch ovirt-hosted-engine-setup-2.3.9-1.el7ev.noarch ovirt-ansible-engine-setup-1.1.9-1.el7ev.noarch ovirt-ansible-hosted-engine-setup-1.0.20-1.el7ev.noarch
This bugzilla is included in oVirt 4.3.4 release, published on June 11th 2019. Since the problem described in this bug report should be resolved in oVirt 4.3.4 release, it has been closed with a resolution of CURRENT RELEASE. If the solution does not work for you, please open a new bug report.