+++ This bug was initially created as a clone of Bug #1803092 +++ Description of problem: oVirt's use of the virDomainBlockCopy API which is used to drive the 'drive/blockdev-mirror' qemu commands relied on the old behaviour of 'drive-mirror' where qemu would open the backing chain of the shallow copy only once 'block-job-complete'. oVirt uses this time to copy the data into the backing files using qemu-img. Libvirt's conversion to use blockdev broke this semantics as qemu requires us to open the backing images prior to attaching the image which will become the destination of shallow copy. Since the images are opened, qemu's image locking is applied to the backing files. This in turn makes qemu-img fail. To solve this problem qemu either must refrain from taking the read-lock on the backing files until 'job-complete' is issued or allow libvirt to open the destination of the shallow blockdev-mirror without backing store (already possible) and then give us the possibility to open the backing store later and install it as the backing store right before calling 'job-complete'. For the second possible approach I tried using 'blockdev-snapshot' as suggested by Kevin, but that didn't work ({"class": "GenericError", "desc": "The overlay is already in use"}) and 'x-blockdev-reopen' which worked successfully but isn't considered stable yet. Follows the original bug description trimmed to bits relevant to qemu: Live storage migration in RHV is broken with libvirt 6.0 because locking changes on destination image chain. The flow is: - Vm running with one (or more) disk - Vdsm create a snapshot on the source storage - Vdsm create empty image chain replicating the original disk on destination storage - Vdsm call virDomainBlockCopy with the destination chain, using flags: flags = (libvirt.VIR_DOMAIN_BLOCK_COPY_SHALLOW | libvirt.VIR_DOMAIN_BLOCK_COPY_REUSE_EXT | libvirt.VIR_DOMAIN_BLOCK_COPY_TRANSIENT_JOB) self._dom.blockCopy(drive.name, destxml, flags=flags) - Libvit starts a mirror job mirroring the active layer in source and destination storage - Vdsm copy the rest of the chain from source to destination storage using qemu-img convert - qemu-img convert fails the copy with: qemu-img: /rhev/data-center/mnt/nfs1:_ export_2/55255570-983a-4d82-907a-19b964abf7ed/images/11aae027-23a3-4c56-a1cb-4883c323e708/66e23991-773c-41e1-bbc9-651cd50b0220: error while converting raw: Failed to get "write" lock\nIs another process using the image [/rhev/data-center/mnt/nfs1:_export_2/55255570-983a-4d82-907a-19b964abf7ed/images/11aae027-23a3-4c56-a1cb-4883c323e708/66e23991 -773c-41e1-bbc9-651cd50b0220]? - The operation fails because qemu is holding a read lock on the destination image chain. [ --- SNIP --- ] --- Additional comment from Peter Krempa on 2020-02-18 16:51:00 CET --- This breaks because RHV abused a quirk in qemu's handling of the backing chain which was opened only when attempting to finish the job. Libvirt's handling expected the backing store to be present right away. I'll try to see whether we can move the opening of the backing chain later to preserve the previous functionality. [ --- SNIP --- ] --- Additional comment from Nir Soffer on 2020-02-19 10:34:00 CET --- (In reply to Peter Krempa from comment #4) > When does oVirt establish the backing files of the copied image? Before calling virDomainBlockCopy. > Are they present when calling virDomainBlockCopy? Yes > Is the metadata correct in the images? Yes. Basically we replicate the image chain on the destination storage, using the same image format and sizes as the original chain. At this point all the images are empty. If the VM is using a template disk, the template disk must exist on the destination storage, so this image will be complete at this point. We don't copy templates as part of live storage migration. The base volume in the chain may have different format compared with the source. For example the source may be raw sparse file on file storage, and the destination may be qcow2 thin disk on block storage. Note that RHV may like to change the destination chain in the future, for example collapsing all the images to single image, but we don't support this yet. Then we call virDomainBlockCopy() with top volume on the destination storage, and libvirt/qemu start to mirror the active layer from source to destination. At this point libvirt can query the image chain to get the structure of the chain. Then we start to copy the disks from source to destination using qemu-img convert. We copy the volumes starting with the base and ending with the last volume before the active layer. We never access the top image on the destination, so it can use write lock at the point virtDomainBlockCopy() is called. When the copy is done we check the state of the block copy job, and when it is ready we pivot to the new chain. So at the point we abort and pivot, we do not access the disks.
QA_ACK, please?
Test on qemu-kvm-4.2.0-15.module+el8.2.0+6029+618ef2ec, qemu-img convert still fail for "write" lock issue. Test Steps: 1. Start src guest with qemu cmds: /usr/libexec/qemu-kvm \ -name 'avocado-vt-vm1' \ -sandbox on \ -machine q35 \ -nodefaults \ -device VGA,bus=pcie.0,addr=0x1 \ -m 14336 \ -smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \ -cpu 'EPYC',+kvm_pv_unhalt \ -chardev socket,id=qmp_id_qmpmonitor1,path=/var/tmp/monitor-qmpmonitor1-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_qmpmonitor1,mode=control \ -chardev socket,id=qmp_id_catch_monitor,path=/var/tmp/monitor-catch_monitor-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_catch_monitor,mode=control \ -device pvpanic,ioport=0x505,id=idy8YPXp \ -object iothread,id=iothread0 \ -chardev socket,path=/var/tmp/serial-serial0-20200203-033416-61dmcn92,server,nowait,id=chardev_serial0 \ -device isa-serial,id=serial0,chardev=chardev_serial0 \ -chardev socket,id=seabioslog_id_20200203-033416-61dmcn92,path=/var/tmp/seabios-20200203-033416-61dmcn92,server,nowait \ -device isa-debugcon,chardev=seabioslog_id_20200203-033416-61dmcn92,iobase=0x402 \ -device pcie-root-port,id=pcie.0-root-port-2,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \ -device pcie-root-port,id=pcie.0-root-port-3,slot=3,chassis=3,addr=0x3,bus=pcie.0 \ -blockdev node-name=file_image1,driver=file,aio=threads,filename=/home/kvm_autotest_root/images/rhel820-64-virtio-scsi.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_image1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_image1 \ -device virtio-blk-pci,id=image1,drive=drive_image1,write-cache=on,bus=pcie.0-root-port-3,iothread=iothread0 \ -device pcie-root-port,id=pcie.0-root-port-6,slot=6,chassis=6,addr=0x6,bus=pcie.0 \ -blockdev node-name=file_data1,driver=file,aio=threads,filename=/home/data.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_data1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_data1 \ -device virtio-blk-pci,id=data1,drive=drive_data1,write-cache=on,bus=pcie.0-root-port-6 \ -device pcie-root-port,id=pcie.0-root-port-4,slot=4,chassis=4,addr=0x4,bus=pcie.0 \ -device virtio-net-pci,mac=9a:6c:ca:b7:36:85,id=idz4QyVp,netdev=idNnpx5D,bus=pcie.0-root-port-4,addr=0x0 \ -netdev tap,id=idNnpx5D,vhost=on \ -blockdev node-name=file_cd1,driver=file,read-only=on,aio=threads,filename=/home/kvm_autotest_root/iso/linux/RHEL8.2.0-BaseOS-x86_64.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \ -device ide-cd,id=cd1,drive=drive_cd1,write-cache=on \ -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \ -vnc :0 \ -rtc base=utc,clock=host,driftfix=slew \ -boot menu=off,order=cdn,once=c,strict=off \ -enable-kvm \ -device pcie-root-port,id=pcie_extra_root_port_0,slot=5,chassis=5,addr=0x5,bus=pcie.0 \ -monitor stdio \ -qmp tcp:0:3000,server,nowait \ 2. Create snapshot on "drive_image1" {'execute':'blockdev-create','arguments':{'options': {'driver':'file','filename':'/root/sn1','size':21474836480},'job-id':'job1'}} {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_sn1','filename':'/root/sn1'}} {'execute':'blockdev-create','arguments':{'options': {'driver': 'qcow2','file':'drive_sn1','size':21474836480},'job-id':'job2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'sn1','file':'drive_sn1'}} {'execute':'job-dismiss','arguments':{'id':'job1'}} {'execute':'job-dismiss','arguments':{'id':'job2'}} {"execute":"blockdev-snapshot","arguments":{"node":"drive_image1","overlay":"sn1"}} 3. DD file in guest (guest)# dd if=/dev/urandom of=t bs=1M count=1000 4. Create snapshot chain in dst #qemu-img create -f qcow2 mirror.qcow2 20G #qemu-img create -f qcow2 mirror_sn.qcow2 -b mirror.qcow2 20G 5. Do block mirror with sync "top" {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_mirror_sn','filename':'/home/mirror_sn.qcow2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'mirror_sn','file':'drive_mirror_sn'}} {"execute": "blockdev-mirror", "arguments": {"sync": "top", "device": "sn1","target": "mirror_sn", "job-id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 385957}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 386063}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "j1"}} {"return": {}} {"timestamp": {"seconds": 1584584035, "microseconds": 291865}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "j1"}} {"timestamp": {"seconds": 1584584035, "microseconds": 291993}, "event": "BLOCK_JOB_READY", "data": {"device": "j1", "len": 1051852800, "offset": 1051852800, "speed": 0, "type": "mirror"}} 6. qemu-img convert from src to dst. #qemu-img convert -f qcow2 -O qcow2 rhel820-64-virtio-scsi.qcow2 mirror.qcow2 qemu-img: mirror.qcow2: error while converting qcow2: Failed to get "write" lock Is another process using the image [mirror.qcow2]? Hi, Peter Verification is failed, please help to check if test steps above are correct here, thanks. BR, Aliang
Hi, Aliang [...] > 4. Create snapshot chain in dst > #qemu-img create -f qcow2 mirror.qcow2 20G > #qemu-img create -f qcow2 mirror_sn.qcow2 -b mirror.qcow2 20G > > 5. Do block mirror with sync "top" > > {'execute':'blockdev-add','arguments':{'driver':'file','node-name': > 'drive_mirror_sn','filename':'/home/mirror_sn.qcow2'}} > > {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name': > 'mirror_sn','file':'drive_mirror_sn'}} This step actually opens 'mirror.qcow2' which must be skipped until later. The idea is that backing files of 'mirror_sn.qcow2' are installed right before we call job-complete. You must add "backing": null here to prevent opening the backing chain. This is another one of the scenarios where some libvirt interaction allows it to work properly. > {"execute": "blockdev-mirror", "arguments": {"sync": "top", "device": > "sn1","target": "mirror_sn", "job-id": "j1"}} > {"timestamp": {"seconds": 1584584034, "microseconds": 385957}, "event": > "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "j1"}} > {"timestamp": {"seconds": 1584584034, "microseconds": 386063}, "event": > "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "j1"}} > {"return": {}} > {"timestamp": {"seconds": 1584584035, "microseconds": 291865}, "event": > "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "j1"}} > {"timestamp": {"seconds": 1584584035, "microseconds": 291993}, "event": > "BLOCK_JOB_READY", "data": {"device": "j1", "len": 1051852800, "offset": > 1051852800, "speed": 0, "type": "mirror"}} > > 6. qemu-img convert from src to dst. > #qemu-img convert -f qcow2 -O qcow2 rhel820-64-virtio-scsi.qcow2 > mirror.qcow2 > qemu-img: mirror.qcow2: error while converting qcow2: Failed to get "write" > lock > Is another process using the image [mirror.qcow2]? So at this point this should work since the backing file will not be opened yet. At this point after the qemu-img finishes copying of the backing data you then blockdev-add the backing file: {'execute':'blockdev-add','arguments':{'driver':'file','node-name': 'drive_mirror_backing','filename':'/home/mirror.qcow2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name': 'mirror_backing','file':'drive_mirror_backing'}} And then use 'blockdev-snapshot' to install it as backing of the mirror_sn.qcow2 image: {"execute":"blockdev-snapshot","arguments":{"node":"mirror_backing","overlay":"mirror_sn"}} After this step you can (block)job-complete the mirror and unplug the original chain. The guest should still see the same data. I hope I didn't do any mistake in the above steps.
Hi, Peter Please help to check if the following test steps are correct. Test Steps: 1. Start guest with qemu cmds: /usr/libexec/qemu-kvm \ -name 'avocado-vt-vm1' \ -sandbox on \ -machine q35 \ -nodefaults \ -device VGA,bus=pcie.0,addr=0x1 \ -m 14336 \ -smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \ -cpu 'EPYC',+kvm_pv_unhalt \ -chardev socket,id=qmp_id_qmpmonitor1,path=/var/tmp/monitor-qmpmonitor1-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_qmpmonitor1,mode=control \ -chardev socket,id=qmp_id_catch_monitor,path=/var/tmp/monitor-catch_monitor-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_catch_monitor,mode=control \ -device pvpanic,ioport=0x505,id=idy8YPXp \ -object iothread,id=iothread0 \ -chardev socket,path=/var/tmp/serial-serial0-20200203-033416-61dmcn92,server,nowait,id=chardev_serial0 \ -device isa-serial,id=serial0,chardev=chardev_serial0 \ -chardev socket,id=seabioslog_id_20200203-033416-61dmcn92,path=/var/tmp/seabios-20200203-033416-61dmcn92,server,nowait \ -device isa-debugcon,chardev=seabioslog_id_20200203-033416-61dmcn92,iobase=0x402 \ -device pcie-root-port,id=pcie.0-root-port-2,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \ -device pcie-root-port,id=pcie.0-root-port-3,slot=3,chassis=3,addr=0x3,bus=pcie.0 \ -blockdev node-name=file_image1,driver=file,aio=threads,filename=/home/kvm_autotest_root/images/rhel820-64-virtio-scsi.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_image1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_image1 \ -device virtio-blk-pci,id=image1,drive=drive_image1,write-cache=on,bus=pcie.0-root-port-3,iothread=iothread0 \ -device pcie-root-port,id=pcie.0-root-port-6,slot=6,chassis=6,addr=0x6,bus=pcie.0 \ -blockdev node-name=file_data1,driver=file,aio=threads,filename=/home/data.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_data1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_data1 \ -device virtio-blk-pci,id=data1,drive=drive_data1,write-cache=on,bus=pcie.0-root-port-6 \ -device pcie-root-port,id=pcie.0-root-port-4,slot=4,chassis=4,addr=0x4,bus=pcie.0 \ -device virtio-net-pci,mac=9a:6c:ca:b7:36:85,id=idz4QyVp,netdev=idNnpx5D,bus=pcie.0-root-port-4,addr=0x0 \ -netdev tap,id=idNnpx5D,vhost=on \ -blockdev node-name=file_cd1,driver=file,read-only=on,aio=threads,filename=/home/kvm_autotest_root/iso/linux/RHEL8.2.0-BaseOS-x86_64.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \ -device ide-cd,id=cd1,drive=drive_cd1,write-cache=on \ -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \ -vnc :0 \ -rtc base=utc,clock=host,driftfix=slew \ -boot menu=off,order=cdn,once=c,strict=off \ -enable-kvm \ -device pcie-root-port,id=pcie_extra_root_port_0,slot=5,chassis=5,addr=0x5,bus=pcie.0 \ -monitor stdio \ -qmp tcp:0:3000,server,nowait \ 2. Create snapshot sn1 {'execute':'blockdev-create','arguments':{'options': {'driver':'file','filename':'/root/sn1','size':21474836480},'job-id':'job1'}} {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_sn1','filename':'/root/sn1'}} {'execute':'blockdev-create','arguments':{'options': {'driver': 'qcow2','file':'drive_sn1','size':21474836480},'job-id':'job2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'sn1','file':'drive_sn1'}} {'execute':'job-dismiss','arguments':{'id':'job1'}} {'execute':'job-dismiss','arguments':{'id':'job2'}} {"execute":"blockdev-snapshot","arguments":{"node":"drive_image1","overlay":"sn1"}} 3. DD file in guest, record its md5sum value (guest)# dd if=/dev/urandom of=t bs=1M count=1000 #md5sum t > sum1 4. Create snapshot chain in dst #qemu-img create -f qcow2 mirror.qcow2 20G #qemu-img create -f qcow2 mirror_sn.qcow2 -b mirror.qcow2 20G 5. Add target node with backing:null and do block mirror with sync "top" {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_mirror_sn','filename':'/home/mirror_sn.qcow2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'mirror_sn','file':'drive_mirror_sn','backing':null}} {"execute": "blockdev-mirror", "arguments": {"sync": "top", "device": "sn1","target": "mirror_sn", "job-id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 385957}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 386063}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "j1"}} {"return": {}} {"timestamp": {"seconds": 1584584035, "microseconds": 291865}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "j1"}} {"timestamp": {"seconds": 1584584035, "microseconds": 291993}, "event": "BLOCK_JOB_READY", "data": {"device": "j1", "len": 1051852800, "offset": 1051852800, "speed": 0, "type": "mirror"}} 6. qemu-img convert from src to dst. #qemu-img convert -f qcow2 -O qcow2 /home/kvm_autotest_root/images/rhel820-64-virtio-scsi.qcow2 /home/mirror.qcow2 7. Do snapshot from mirror to mirror_sn {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_mirror','filename':'/home/mirror.qcow2'}} {"return": {}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'mirror','file':'drive_mirror'}} {"return": {}} {"execute":"blockdev-snapshot","arguments":{"node":"mirror","overlay":"mirror_sn"}} 8. Start guest in dst with -incoming setting /usr/libexec/qemu-kvm \ -name 'avocado-vt-vm1' \ -sandbox on \ -machine q35 \ -nodefaults \ -device VGA,bus=pcie.0,addr=0x1 \ -m 14336 \ -smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \ -cpu 'EPYC',+kvm_pv_unhalt \ -chardev socket,id=qmp_id_qmpmonitor1,path=/var/tmp/monitor-qmpmonitor1-20200203-033416-61dmcn93,server,nowait \ -mon chardev=qmp_id_qmpmonitor1,mode=control \ -chardev socket,id=qmp_id_catch_monitor,path=/var/tmp/monitor-catch_monitor-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_catch_monitor,mode=control \ -device pvpanic,ioport=0x505,id=idy8YPXp \ -object iothread,id=iothread0 \ -chardev socket,path=/var/tmp/serial-serial0-20200203-033416-61dmcn92,server,nowait,id=chardev_serial0 \ -device isa-serial,id=serial0,chardev=chardev_serial0 \ -chardev socket,id=seabioslog_id_20200203-033416-61dmcn92,path=/var/tmp/seabios-20200203-033416-61dmcn92,server,nowait \ -device isa-debugcon,chardev=seabioslog_id_20200203-033416-61dmcn92,iobase=0x402 \ -device pcie-root-port,id=pcie.0-root-port-2,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \ -device pcie-root-port,id=pcie.0-root-port-3,slot=3,chassis=3,addr=0x3,bus=pcie.0 \ -blockdev node-name=file_image1,driver=file,aio=threads,filename=/home/mirror_sn.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_image1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_image1 \ -device virtio-blk-pci,id=image1,drive=drive_image1,write-cache=on,bus=pcie.0-root-port-3,iothread=iothread0 \ -device pcie-root-port,id=pcie.0-root-port-6,slot=6,chassis=6,addr=0x6,bus=pcie.0 \ -blockdev node-name=file_data1,driver=file,aio=threads,filename=/home/data.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_data1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_data1 \ -device virtio-blk-pci,id=data1,drive=drive_data1,write-cache=on,bus=pcie.0-root-port-6 \ -device pcie-root-port,id=pcie.0-root-port-4,slot=4,chassis=4,addr=0x4,bus=pcie.0 \ -device virtio-net-pci,mac=9a:6c:ca:b7:36:85,id=idz4QyVp,netdev=idNnpx5D,bus=pcie.0-root-port-4,addr=0x0 \ -netdev tap,id=idNnpx5D,vhost=on \ -blockdev node-name=file_cd1,driver=file,read-only=on,aio=threads,filename=/home/kvm_autotest_root/iso/linux/RHEL8.2.0-BaseOS-x86_64.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \ -device ide-cd,id=cd1,drive=drive_cd1,write-cache=on \ -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \ -vnc :1 \ -rtc base=utc,clock=host,driftfix=slew \ -boot menu=off,order=cdn,once=c,strict=off \ -enable-kvm \ -device pcie-root-port,id=pcie_extra_root_port_0,slot=5,chassis=5,addr=0x5,bus=pcie.0 \ -monitor stdio \ -qmp tcp:0:3001,server,nowait \ -incoming tcp:0:5000 \ 9. Set migration capabilities in both src and dst. {"execute":"migrate-set-capabilities","arguments":{"capabilities":[{"capability":"pause-before-switchover","state":true}]}} 10. Migration from src to dst. {"execute": "migrate","arguments":{"uri": "tcp:10.73.196.71:5000"}} {"return": {}} {"timestamp": {"seconds": 1584610188, "microseconds": 641582}, "event": "STOP"} 11. Cancel block jobs in src {"execute":"block-job-cancel","arguments":{"device":"j1"}} {"return": {}} {"timestamp": {"seconds": 1584610193, "microseconds": 196697}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "j1"}} {"timestamp": {"seconds": 1584610193, "microseconds": 196761}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "j1"}} {"timestamp": {"seconds": 1584610193, "microseconds": 196863}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "j1", "len": 1053687808, "offset": 1053687808, "speed": 0, "type": "mirror"}} {"timestamp": {"seconds": 1584610193, "microseconds": 196912}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "j1"}} {"timestamp": {"seconds": 1584610193, "microseconds": 196953}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "j1"}} 12. Continue migration in src {"execute":"migrate-continue","arguments":{"state":"pre-switchover"}} {"return": {}} 13. Check dst guest status (qemu)info status VM status: running 14. Check file's md5sum value in dst guest (guest)# md5sum t #cat sum1 After step14, values should be the same. When test with qemu-kvm-4.2.0-15.module+el8.2.0+6029+618ef2ec, all test steps can executed successfully. But when test with qemu-kvm-4.2.0-13.module+el8.2.0+5898+fb4bceae, test blocked in step7 after live snapshot with error info: {"execute":"blockdev-snapshot","arguments":{"node":"mirror","overlay":"mirror_sn"}} {"error": {"class": "GenericError", "desc": "The overlay is already in use"}} It seems that it have different error info with that reported in bug. So, not sure, if the reproduce step is correct, please help to check again. Thanks, Aliang
(In reply to aihua liang from comment #11) Note that the "live storage migration" is a oVirt term for just using blockdev-mirror to copy the image to some new destination, so in fact no migration of the VM is involved, thus after step 7 you should use blockjob-complete/job-complete to switch over to the new images and that's it. > When test with qemu-kvm-4.2.0-15.module+el8.2.0+6029+618ef2ec, all test > steps can executed successfully. > But when test with qemu-kvm-4.2.0-13.module+el8.2.0+5898+fb4bceae, test > blocked in step7 after live snapshot with error info: > > {"execute":"blockdev-snapshot","arguments":{"node":"mirror","overlay": > "mirror_sn"}} > {"error": {"class": "GenericError", "desc": "The overlay is already in use"}} Yes, this is exactly expected. The qemu patches are actually allowing this specific operation which is then used by libvirt to do the appropriate steps so this is the exact message which I've seen after the required libvirt changes. I'm sorry I didn't update the bug, we were discussing the design issues upstream and I forgot then.
Test on qemu-kvm-4.2.0-15.module+el8.2.0+6029+618ef2ec, no this issue anymore. Test Steps: 1. Start guest with qemu cmds: /usr/libexec/qemu-kvm \ -name 'avocado-vt-vm1' \ -sandbox on \ -machine q35 \ -nodefaults \ -device VGA,bus=pcie.0,addr=0x1 \ -m 14336 \ -smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \ -cpu 'EPYC',+kvm_pv_unhalt \ -chardev socket,id=qmp_id_qmpmonitor1,path=/var/tmp/monitor-qmpmonitor1-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_qmpmonitor1,mode=control \ -chardev socket,id=qmp_id_catch_monitor,path=/var/tmp/monitor-catch_monitor-20200203-033416-61dmcn92,server,nowait \ -mon chardev=qmp_id_catch_monitor,mode=control \ -device pvpanic,ioport=0x505,id=idy8YPXp \ -object iothread,id=iothread0 \ -chardev socket,path=/var/tmp/serial-serial0-20200203-033416-61dmcn92,server,nowait,id=chardev_serial0 \ -device isa-serial,id=serial0,chardev=chardev_serial0 \ -chardev socket,id=seabioslog_id_20200203-033416-61dmcn92,path=/var/tmp/seabios-20200203-033416-61dmcn92,server,nowait \ -device isa-debugcon,chardev=seabioslog_id_20200203-033416-61dmcn92,iobase=0x402 \ -device pcie-root-port,id=pcie.0-root-port-2,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \ -device pcie-root-port,id=pcie.0-root-port-3,slot=3,chassis=3,addr=0x3,bus=pcie.0 \ -blockdev node-name=file_image1,driver=file,aio=threads,filename=/home/kvm_autotest_root/images/rhel820-64-virtio-scsi.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_image1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_image1 \ -device virtio-blk-pci,id=image1,drive=drive_image1,write-cache=on,bus=pcie.0-root-port-3,iothread=iothread0 \ -device pcie-root-port,id=pcie.0-root-port-6,slot=6,chassis=6,addr=0x6,bus=pcie.0 \ -blockdev node-name=file_data1,driver=file,aio=threads,filename=/home/data.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_data1,driver=qcow2,cache.direct=on,cache.no-flush=off,file=file_data1 \ -device virtio-blk-pci,id=data1,drive=drive_data1,write-cache=on,bus=pcie.0-root-port-6 \ -device pcie-root-port,id=pcie.0-root-port-4,slot=4,chassis=4,addr=0x4,bus=pcie.0 \ -device virtio-net-pci,mac=9a:6c:ca:b7:36:85,id=idz4QyVp,netdev=idNnpx5D,bus=pcie.0-root-port-4,addr=0x0 \ -netdev tap,id=idNnpx5D,vhost=on \ -blockdev node-name=file_cd1,driver=file,read-only=on,aio=threads,filename=/home/kvm_autotest_root/iso/linux/RHEL8.2.0-BaseOS-x86_64.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \ -device ide-cd,id=cd1,drive=drive_cd1,write-cache=on \ -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \ -vnc :0 \ -rtc base=utc,clock=host,driftfix=slew \ -boot menu=off,order=cdn,once=c,strict=off \ -enable-kvm \ -device pcie-root-port,id=pcie_extra_root_port_0,slot=5,chassis=5,addr=0x5,bus=pcie.0 \ -monitor stdio \ -qmp tcp:0:3000,server,nowait \ 2. Create snapshot sn1 {'execute':'blockdev-create','arguments':{'options': {'driver':'file','filename':'/root/sn1','size':21474836480},'job-id':'job1'}} {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_sn1','filename':'/root/sn1'}} {'execute':'blockdev-create','arguments':{'options': {'driver': 'qcow2','file':'drive_sn1','size':21474836480},'job-id':'job2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'sn1','file':'drive_sn1'}} {'execute':'job-dismiss','arguments':{'id':'job1'}} {'execute':'job-dismiss','arguments':{'id':'job2'}} {"execute":"blockdev-snapshot","arguments":{"node":"drive_image1","overlay":"sn1"}} 3. DD file in guest, record its md5sum value (guest)# dd if=/dev/urandom of=t bs=1M count=1000 #md5sum t > sum1 4. Create snapshot chain in dst #qemu-img create -f qcow2 mirror.qcow2 20G #qemu-img create -f qcow2 mirror_sn.qcow2 -b mirror.qcow2 20G 5. Add target node with backing:null and do block mirror with sync "top" {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_mirror_sn','filename':'/home/mirror_sn.qcow2'}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'mirror_sn','file':'drive_mirror_sn','backing':null}} {"execute": "blockdev-mirror", "arguments": {"sync": "top", "device": "sn1","target": "mirror_sn", "job-id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 385957}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "j1"}} {"timestamp": {"seconds": 1584584034, "microseconds": 386063}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "j1"}} {"return": {}} {"timestamp": {"seconds": 1584584035, "microseconds": 291865}, "event": "JOB_STATUS_CHANGE", "data": {"status": "ready", "id": "j1"}} {"timestamp": {"seconds": 1584584035, "microseconds": 291993}, "event": "BLOCK_JOB_READY", "data": {"device": "j1", "len": 1051852800, "offset": 1051852800, "speed": 0, "type": "mirror"}} 6. qemu-img convert from src to dst. #qemu-img convert -f qcow2 -O qcow2 /home/kvm_autotest_root/images/rhel820-64-virtio-scsi.qcow2 /home/mirror.qcow2 7. Do snapshot from mirror to mirror_sn {'execute':'blockdev-add','arguments':{'driver':'file','node-name':'drive_mirror','filename':'/home/mirror.qcow2'}} {"return": {}} {'execute':'blockdev-add','arguments':{'driver':'qcow2','node-name':'mirror','file':'drive_mirror'}} {"return": {}} {"execute":"blockdev-snapshot","arguments":{"node":"mirror","overlay":"mirror_sn"}} 8. Complete the block job. { "execute": "block-job-complete", "arguments": { "device": "j1" } } {"return": {}} {"timestamp": {"seconds": 1584674440, "microseconds": 292177}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "j1"}} {"timestamp": {"seconds": 1584674440, "microseconds": 292482}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "j1"}} {"timestamp": {"seconds": 1584674440, "microseconds": 292678}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "j1", "len": 1056702464, "offset": 1056702464, "speed": 0, "type": "mirror"}} {"timestamp": {"seconds": 1584674440, "microseconds": 292741}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "j1"}} {"timestamp": {"seconds": 1584674440, "microseconds": 292783}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "j1"}} 9. Check block info. (qemu)info block info block mirror_sn: json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "/home/mirror.qcow2"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "/home/mirror_sn.qcow2"}} (qcow2) Attached to: /machine/peripheral/image1/virtio-backend Cache mode: writeback Backing file: /home/mirror.qcow2 (chain depth: 1) drive_data1: /home/data.qcow2 (qcow2) Attached to: /machine/peripheral/data1/virtio-backend Cache mode: writeback, direct drive_cd1: /home/kvm_autotest_root/iso/linux/RHEL8.2.0-BaseOS-x86_64.iso (raw, read-only) Attached to: cd1 Removable device: not locked, tray closed Cache mode: writeback, direct After step9, VM has worked on the latest mirror disk. So, set bug's status to "Verified".
Since the problem described in this bug report should be resolved in a recent advisory, it has been closed with a resolution of ERRATA. For information on the advisory, and where to find the updated files, follow the link below. If the solution does not work for you, open a new bug report. https://access.redhat.com/errata/RHBA-2020:2017