Note: This bug is displayed in read-only format because
the product is no longer active in Red Hat Bugzilla.
RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
Description of problem:
Failed to take a veth up(here 'up' means creating an NM profile, not real link state up) and attach it to a vrf at the same time.
It works well on other main port types(bond, team, bridge, ovs), but only vrf.
Version-Release number of selected component (if applicable):
nmstate-1.0.1-0.1.el8.noarch
nispor-1.0.1-2.el8.x86_64
NetworkManager-1.30.0-0.5.el8.x86_64
How reproducible:
100%
Steps to Reproduce:
nmcli con del veth0
ip link del veth0
ip link add veth0 type veth peer veth0_ep
ip link set veth0 up
cat << EOF > vrf0.yaml
interfaces:
# vrf
- name: vrf0
type: vrf
state: up
vrf:
port:
- veth0
route-table-id: 1000
- {name: veth0, type: ethernet, state: up}
EOF
nmstatectl set vrf0.yaml #failed at 1st time
nmstatectl set vrf0.yaml #works at 2nd time
Actual results:
failed at 1st time
Expected results:
no failure
Additional info:
Traceback (most recent call last):
File "/usr/bin/nmstatectl", line 11, in <module>
load_entry_point('nmstate==1.0.1', 'console_scripts', 'nmstatectl')()
File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 70, in main
return args.func(args)
File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 289, in apply
args.save_to_disk,
File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 329, in apply_state
save_to_disk=save_to_disk,
File "/usr/lib/python3.6/site-packages/libnmstate/netapplier.py", line 71, in apply
_apply_ifaces_state(plugins, net_state, verify_change, save_to_disk)
File "/usr/lib/python3.6/site-packages/libnmstate/netapplier.py", line 104, in _apply_ifaces_state
plugin.apply_changes(net_state, save_to_disk)
File "/usr/lib/python3.6/site-packages/libnmstate/nm/plugin.py", line 323, in apply_changes
NmProfiles(self.context).apply_config(net_state, save_to_disk)
File "/usr/lib/python3.6/site-packages/libnmstate/nm/profiles.py", line 59, in apply_config
self._ctx.wait_all_finish()
File "/usr/lib/python3.6/site-packages/libnmstate/nm/context.py", line 222, in wait_all_finish
raise tmp_error
libnmstate.error.NmstateLibnmError: Activate profile uuid:d8d7b15a-01d8-4e70-b15f-8c2f08fd03a6 iface:veth0 type: ethernet failed: reason=<enum NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED of type NM.ActiveConnectionStateReason> <enum NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE of type NM.DeviceStateReason>
Correct the reproducer:
nmcli con del veth0
ip link del veth0
ip link add veth0 type veth peer veth0_ep
ip link set veth0 up
#add the command below
ip link set veth0_ep up
cat << EOF > vrf0.yaml
interfaces:
# vrf
- name: vrf0
type: vrf
state: up
vrf:
port:
- veth0
route-table-id: 1000
- {name: veth0, type: ethernet, state: up}
EOF
nmstatectl set vrf0.yaml
Comment 2Fernando F. Mancera
2021-01-13 15:18:11 UTC
Since the problem described in this bug report should be
resolved in a recent advisory, it has been closed with a
resolution of ERRATA.
For information on the advisory (nmstate bug fix and enhancement update), and where to find the updated
files, follow the link below.
If the solution does not work for you, open a new bug report.
https://access.redhat.com/errata/RHBA-2021:1748
Description of problem: Failed to take a veth up(here 'up' means creating an NM profile, not real link state up) and attach it to a vrf at the same time. It works well on other main port types(bond, team, bridge, ovs), but only vrf. Version-Release number of selected component (if applicable): nmstate-1.0.1-0.1.el8.noarch nispor-1.0.1-2.el8.x86_64 NetworkManager-1.30.0-0.5.el8.x86_64 How reproducible: 100% Steps to Reproduce: nmcli con del veth0 ip link del veth0 ip link add veth0 type veth peer veth0_ep ip link set veth0 up cat << EOF > vrf0.yaml interfaces: # vrf - name: vrf0 type: vrf state: up vrf: port: - veth0 route-table-id: 1000 - {name: veth0, type: ethernet, state: up} EOF nmstatectl set vrf0.yaml #failed at 1st time nmstatectl set vrf0.yaml #works at 2nd time Actual results: failed at 1st time Expected results: no failure Additional info: Traceback (most recent call last): File "/usr/bin/nmstatectl", line 11, in <module> load_entry_point('nmstate==1.0.1', 'console_scripts', 'nmstatectl')() File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 70, in main return args.func(args) File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 289, in apply args.save_to_disk, File "/usr/lib/python3.6/site-packages/nmstatectl/nmstatectl.py", line 329, in apply_state save_to_disk=save_to_disk, File "/usr/lib/python3.6/site-packages/libnmstate/netapplier.py", line 71, in apply _apply_ifaces_state(plugins, net_state, verify_change, save_to_disk) File "/usr/lib/python3.6/site-packages/libnmstate/netapplier.py", line 104, in _apply_ifaces_state plugin.apply_changes(net_state, save_to_disk) File "/usr/lib/python3.6/site-packages/libnmstate/nm/plugin.py", line 323, in apply_changes NmProfiles(self.context).apply_config(net_state, save_to_disk) File "/usr/lib/python3.6/site-packages/libnmstate/nm/profiles.py", line 59, in apply_config self._ctx.wait_all_finish() File "/usr/lib/python3.6/site-packages/libnmstate/nm/context.py", line 222, in wait_all_finish raise tmp_error libnmstate.error.NmstateLibnmError: Activate profile uuid:d8d7b15a-01d8-4e70-b15f-8c2f08fd03a6 iface:veth0 type: ethernet failed: reason=<enum NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED of type NM.ActiveConnectionStateReason> <enum NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE of type NM.DeviceStateReason>