RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
Bug 1915675 - dracut-pre-udev[611]: modprobe: ERROR: could not insert 'sha256_mb': No such device
Summary: dracut-pre-udev[611]: modprobe: ERROR: could not insert 'sha256_mb': No such ...
Keywords:
Status: CLOSED DUPLICATE of bug 1914957
Alias: None
Product: Red Hat Enterprise Linux 8
Classification: Red Hat
Component: dracut
Version: 8.4
Hardware: x86_64
OS: Linux
urgent
unspecified
Target Milestone: rc
: 8.4
Assignee: Lukáš Nykrýn
QA Contact: qe-baseos-daemons
URL:
Whiteboard:
Depends On:
Blocks:
TreeView+ depends on / blocked
 
Reported: 2021-01-13 08:16 UTC by Qiao Zhao
Modified: 2021-01-20 11:35 UTC (History)
7 users (show)

Fixed In Version:
Doc Type: If docs needed, set a value
Doc Text:
Clone Of:
Environment:
Last Closed: 2021-01-20 11:35:22 UTC
Type: Bug
Target Upstream Version:
Embargoed:


Attachments (Terms of Use)

Description Qiao Zhao 2021-01-13 08:16:36 UTC
Description of problem:

All RHEL-8.4.0-20210112.n.0 x86_64 install failed, found such error message 
"dracut-pre-udev[611]: modprobe: ERROR: could not insert 'sha256_mb': No such device" in all failed jobs.
And check the previous-successful jobs, no such error message. And other architectures install pass.

FAIL job:
https://beaker.engineering.redhat.com/recipes/9383430
https://beaker.engineering.redhat.com/recipes/9383020#tasks
https://beaker.engineering.redhat.com/recipes/9384450

Logs:
[   34.209462] No iBFT detected. 
[   34.353033] raid6: sse2x1   gen()  2383 MB/s 
[   34.389027] raid6: sse2x1   xor()  1658 MB/s 
[   34.425031] raid6: sse2x2   gen()  2909 MB/s 
[   34.461026] raid6: sse2x2   xor()  2249 MB/s 
[   34.497032] raid6: sse2x4   gen()  3499 MB/s 
[   34.534026] raid6: sse2x4   xor()  1912 MB/s 
[   34.554452] raid6: using algorithm sse2x4 gen() 3499 MB/s 
[   34.581188] raid6: .... xor() 1912 MB/s, rmw enabled 
[   34.606817] raid6: using ssse3x2 recovery algorithm 
[   34.633272] async_tx: api initialized (async) 
[   34.656862] xor: automatically using best checksumming function   avx        
[   34.891982] device-mapper: uevent: version 1.0.3 
[   34.913103] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel 
[   35.113814] device-mapper: multipath round-robin: version 1.2.0 loaded 
[   35.265943] dracut-pre-udev[754]: modprobe: ERROR: could not insert 'sha256_mb': No such device 
[   35.467709] RPC: Registered named UNIX socket transport module. 
[   35.494419] RPC: Registered udp transport module. 
[   35.516095] RPC: Registered tcp transport module. 
[   35.537403] RPC: Registered tcp NFSv4.1 backchannel transport module. 
[      
  OK     
] Started dracut pre-udev hook. 
         Starting udev Kernel Device Manager... 
[      
  OK     
] Started udev Kernel Device Manager. 
         Starting dracut pre-trigger hook... 
[      
  OK     
] Started dracut pre-trigger hook. 
         Starting udev Coldplug all Devices... 
         Mounting Kernel Configuration File System... 
[      
  OK     
] Mounted Kernel Configuration File System. 
[      
  OK     
] Started udev Coldplug all Devices. 
         Starting udev Wait for Complete Device Initialization... 
         Starting Show Plymouth Boot Screen... 
[      
  OK     
] Started Show Plymouth Boot Screen.  
[      
  OK     
] Started Forward Password Requests to Plymouth Directory Watch.  
[      
  OK     
] Reached target Paths.  
[      
  OK     
] Reached target Local Encrypted Volumes.  
[   36.873367] PCI Interrupt Link [I0C0] enabled at IRQ 36 
[   36.927899] HP HPSA Driver (v 3.4.20-200-RH1) 
[   36.962571] tg3 0000:04:00.0 eth0: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address a0:d3:c1:f4:6c:d4 
[   37.011794] tg3 0000:04:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 
[   37.011797] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] 
[   37.011799] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] 
[   37.020031] hpsa 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control 
[   37.285176] PCI Interrupt Link [I020] enabled at IRQ 24 
[   37.333493] hpsa 0000:03:00.0: Logical aborts not supported 
[   37.358633] hpsa 0000:03:00.0: HP SSD Smart Path aborts not supported 
[   37.389087] PCI Interrupt Link [SATA] enabled at IRQ 16 
[   37.430089] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode 
[   37.471352] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc  
[   37.584081] scsi host0: hpsa 
[   37.606432] hpsa can't handle SMP requests 
[   37.631372] scsi host1: ahci 
[   37.653096] ata1: SATA max UDMA/133 abar m1024@0xfccf0000 port 0xfccf0100 irq 16 
[   37.695329] hpsa 0000:03:00.0: scsi 0:0:0:0: added RAID              HP       P420i            controller SSDSmartPathCap- En- Exp=1 
[   37.717300] PCI Interrupt Link [I0C1] enabled at IRQ 37 
[   37.749240] hpsa 0000:03:00.0: scsi 0:0:1:0: masked Direct-Access     HP       EG0300FCVBF      PHYS DRV SSDSmartPathCap- En- Exp=0 
[   37.749246] hpsa 0000:03:00.0: scsi 0:0:2:0: masked Enclosure         PMCSIERA SRCv8x6G         enclosure SSDSmartPathCap- En- Exp=0 
[   37.749251] hpsa 0000:03:00.0: scsi 0:1:0:0: added Direct-Access     HP       LOGICAL VOLUME   RAID-0 SSDSmartPathCap- En- Exp=1 
[   37.777871] mgag200 0000:02:00.1: vgaarb: deactivate vga console 
[   37.826989] hpsa can't handle SMP requests 
[   37.903026] tg3 0000:04:00.1 eth1: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address a0:d3:c1:f4:6c:d5 
[   37.937401] scsi 0:0:0:0: RAID              HP       P420i            5.42 PQ: 0 ANSI: 5 
[   37.964818] tg3 0000:04:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 
[   37.984986] scsi 0:1:0:0: Direct-Access     HP       LOGICAL VOLUME   5.42 PQ: 0 ANSI: 5 
[   38.035577] tg3 0000:04:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] 
[   38.035580] tg3 0000:04:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] 
[   38.057491] tg3 0000:04:00.2 eth2: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address a0:d3:c1:f4:6c:d6 
[   38.159176] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
[   38.188562] tg3 0000:04:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 
[   38.188564] tg3 0000:04:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] 
[   38.188566] tg3 0000:04:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit] 
[   38.210421] tg3 0000:04:00.3 eth3: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address a0:d3:c1:f4:6c:d7 
[   38.221752] ata1.00: ATAPI: hp       DVDRAM GT80N, EA02, max UDMA/100 
[   38.267568] tg3 0000:04:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) 
[   38.267570] tg3 0000:04:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] 
[   38.267571] tg3 0000:04:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit] 
[   38.296052] scsi 0:0:0:0: Attached scsi generic sg0 type 12 
[   38.301839] tg3 0000:04:00.1 eno2: renamed from eth1 
[   38.344196] ata1.00: configured for UDMA/100 
[   38.375798] scsi 0:1:0:0: Attached scsi generic sg1 type 0 
[   38.414226] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT80N     EA02 PQ: 0 ANSI: 5 
[   38.732401] sd 0:1:0:0: [sda] 585871964 512-byte logical blocks: (300 GB/279 GiB) 
[   38.732455] sd 0:1:0:0: [sda] Write Protect is off 
[   38.732535] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 
[   38.732541] sd 0:1:0:0: [sda] Optimal transfer size 262144 bytes 
[   38.732766] Console: switching to colour dummy device 80x25 
[   38.733542] tg3 0000:04:00.3 eno4: renamed from eth3 
[   38.775869] [TTM] Zone  kernel: Available graphics memory: 16433610 KiB 
[   38.937676] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB 
[   38.937677] [TTM] Initializing pool allocator 
[   38.970821] [TTM] Initializing DMA pool allocator 
[   38.972400]  sda: sda1 sda2 
[   38.974136] sd 0:1:0:0: [sda] Attached SCSI disk 
[   39.006413] tg3 0000:04:00.0 eno1: renamed from eth0 
[   39.008648] scsi 1:0:0:0: Attached scsi generic sg2 type 5 
[   39.113270] fbcon: mgag200drmfb (fb0) is primary device 
[   39.206675] tg3 0000:04:00.2 eno3: renamed from eth2 
[   39.224137] Console: switching to colour frame buffer device 128x48 
[   39.225825] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 
[   39.225830] cdrom: Uniform CD-ROM driver Revision: 3.20 
[   39.363643] mgag200 0000:02:00.1: fb0: mgag200drmfb frame buffer device 
[      
  OK     
] Started cancel waiting for multipath siblings of sda.  
[   39.426351] [drm] Initialized mgag200 1.0.0 20110418 for 0000:02:00.1 on minor 0 
[   
      
*        
] A start job is running for udev Wai…ice Initialization (14s / 3min 7s)   
[        
*   
      
*       
] A start job is running for udev Wai…ice Initialization (15s / 3min 7s)   
... ...

Version-Release number of selected component (if applicable):


How reproducible:


Steps to Reproduce:
1.
2.
3.

Actual results:


Expected results:


Additional info:

Comment 1 Qiao Zhao 2021-01-13 08:29:09 UTC
Task 9384450 log:
] Started dracut cmdline hook. 
         Starting dracut pre-udev hook... 
[   15.419623] cramfs is deprecated and is slated for removal in a future RHEL release. Please use an alternative file system like squashfs. 
[   15.451290] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
[   15.480306] dracut-pre-udev[611]: modprobe: FATAL: Module floppy not found in directory /lib/modules/4.18.0-272.el8.x86_64 
[   15.503818] No iBFT detected. 
[   15.584006] raid6: sse2x1   gen()  7179 MB/s 
[   15.605006] raid6: sse2x1   xor()  4036 MB/s 
[   15.626006] raid6: sse2x2   gen()  7904 MB/s 
[   15.647005] raid6: sse2x2   xor()  4823 MB/s 
[   15.668006] raid6: sse2x4   gen()  7765 MB/s 
[   15.689005] raid6: sse2x4   xor()  4581 MB/s 
[   15.693763] raid6: using algorithm sse2x2 gen() 7904 MB/s 
[   15.699780] raid6: .... xor() 4823 MB/s, rmw enabled 
[   15.705323] raid6: using ssse3x2 recovery algorithm 
[   15.712434] async_tx: api initialized (async) 
[   15.719310] xor: automatically using best checksumming function   avx        
[   15.835419] device-mapper: uevent: version 1.0.3 
[   15.840701] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel 
[   15.933831] device-mapper: multipath round-robin: version 1.2.0 loaded 
[   16.016136] dracut-pre-udev[611]: modprobe: ERROR: could not insert 'sha256_mb': No such device 
[   16.129854] RPC: Registered named UNIX socket transport module. 
[   16.136478] RPC: Registered udp transport module. 
[   16.141732] RPC: Registered tcp transport module. 
[   16.146984] RPC: Registered tcp NFSv4.1 backchannel transport module. 
[   16.190611] random: crng init done 
[   16.194419] random: 7 urandom warning(s) missed due to ratelimiting 
[      
  OK     
] Started dracut pre-udev hook. 
         Starting udev Kernel Device Manager... 
[      
  OK     
] Started udev Kernel Device Manager. 
         Starting dracut pre-trigger hook... 
[      
  OK     
] Started dracut pre-trigger h[   16.696945] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected 
ook. 

... ...

] Reached target Basic System.  
[   18.680243] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready 
[   18.738028] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready 
[   18.747348] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready 
[   18.804922] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready 
[   18.812694] IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready 
[   18.871902] IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready 
[   18.879683] IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready 
[   18.939044] IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready 
[   22.286419] igb 0000:01:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX 
[   22.296947] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready 
[      
  OK     
] Started cancel waiting for multipath siblings of sda.  
[   29.499870] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready 
[   29.508474] IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready 
[   29.516975] IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready 
[   36.251952] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready 
[   36.260545] IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready 

The dracut still wait for network startup.

Comment 8 Lukáš Nykrýn 2021-01-20 11:35:22 UTC
Looks like a duplicate of 1914957

*** This bug has been marked as a duplicate of bug 1914957 ***


Note You need to log in before you can comment on or make changes to this bug.