Created attachment 1755354 [details]
SELINUX LOG FROM  SHORT SECONDS

Description of problem:

Selinux prevention


Version-Release number of selected component (if applicable):

SELinux status:                 enabled
SELinuxfs mount:                /sys/fs/selinux
SELinux root directory:         /etc/selinux
Loaded policy name:             targeted
Current mode:                   enforcing
Mode from config file:          enforcing
Policy MLS status:              enabled
Policy deny_unknown status:     allowed
Memory protection checking:     actual (secure)
Max kernel policy version:      33

How reproducible:

1. Just turn on my notebook
2. cpu usage is autimatically grow, and found selinux-flatpak log in journal


Actual results:

 - I have no experience a mistake. 
 - journal log
 - and hight cpu usage because setroubleshoot 


Expected results:

This is a selinux issue, so solve it.
I need to remove setroubleshoot?


Additional info:
I attached a selinux-log.log file as attachment:
THE LOG:
-- Logs begin at Sun 2020-05-03 14:06:09 CEST. --
febr 06 17:03:44 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.qbittorrent.qBittorrent.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:03:44 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.qbittorrent.qBittorrent.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the org.qbittorrent.qBittorrent.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/org.qbittorrent.qBittorrent.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/org.qbittorrent.qBittorrent.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/org.qbittorrent.qBittorrent.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the org.qbittorrent.qBittorrent.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:03:44 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:03:44 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:03:44 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop
febr 06 17:03:48 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:03:48 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the org.videolan.VLC-openvcd.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/org.videolan.VLC-openvcd.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the org.videolan.VLC-openvcd.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:03:48 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:03:48 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:03:48 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop
febr 06 17:03:51 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:03:51 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the com.obsproject.Studio.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/com.obsproject.Studio.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the com.obsproject.Studio.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:03:51 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:03:51 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:03:51 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop
febr 06 17:03:55 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:03:55 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the com.microsoft.Teams.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/com.microsoft.Teams.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the com.microsoft.Teams.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:03:55 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:03:55 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:03:55 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop
febr 06 17:03:58 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:03:58 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the org.gnome.gitlab.YaLTeR.VideoTrimmer.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:03:58 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:03:58 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:03:58 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop
febr 06 17:04:02 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop. For complete SELinux messages run: sealert -l a089eafa-d902-469c-b1b6-4adbfc20df76
febr 06 17:04:02 wagner setroubleshoot[1146]: SELinux is preventing dbus-daemon from read access on the lnk_file /var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop.
                                              
                                              *****  Plugin catchall_labels (83.8 confidence) suggests   *******************
                                              
                                              If you want to allow dbus-daemon to have read access on the org.libreoffice.LibreOffice.desktop lnk_file
                                              Then you need to change the label on /var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop
                                              Do
                                              # semanage fcontext -a -t FILE_TYPE '/var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop'
                                              where FILE_TYPE is one of the following: NetworkManager_etc_rw_t, NetworkManager_etc_t, abrt_etc_t, abrt_var_cache_t, admin_home_t, aiccu_etc_t, alsa_etc_rw_t, antivirus_conf_t, asterisk_etc_t, bin_t, bitlbee_conf_t, bluetooth_conf_t, boot_t, bootloader_etc_t, cache_home_t, cert_t, cgconfig_etc_t, cgroup_t, cgrules_etc_t, cluster_conf_t, cobbler_etc_t, condor_conf_t, config_home_t, config_usr_t, conntrackd_conf_t, container_config_t, couchdb_conf_t, courier_etc_t, cpucontrol_conf_t, cupsd_etc_t, cupsd_rw_etc_t, data_home_t, dbus_home_t, dbusd_etc_t, ddclient_etc_t, device_t, devlog_t, dhcp_etc_t, dictd_etc_t, dnsmasq_etc_t, dovecot_etc_t, ecryptfs_t, etc_mail_t, etc_runtime_t, etc_t, exports_t, fetchmail_etc_t, file_context_t, fingerd_etc_t, firewalld_etc_rw_t, firstboot_etc_t, fonts_cache_t, fonts_t, ftpd_etc_t, gconf_etc_t, gconf_home_t, gdomap_conf_t, getty_etc_t, gkeyringd_gnome_home_t, gkeyringd_tmp_t, gnome_home_t, gpm_conf_t, gstreamer_home_t, hddtemp_etc_t, home_root_t, hostname_etc_t, httpd_config_t, hwdata_t, ibacm_conf_t, icc_data_home_t, innd_etc_t, irc_conf_t, irssi_etc_t, kdump_etc_t, kmscon_conf_t, krb5_conf_t, krb5kdc_conf_t, l2tp_conf_t, ld_so_t, lib_t, likewise_etc_t, lircd_etc_t, locale_t, lvm_etc_t, machineid_t, man_cache_t, man_t, mcelog_etc_t, mdadm_conf_t, minidlna_conf_t, minissdpd_conf_t, mock_etc_t, modules_conf_t, mozilla_conf_t, mozilla_plugin_tmp_t, mozilla_plugin_tmpfs_t, mpd_etc_t, mplayer_etc_t, mrtg_etc_t, mscan_etc_t, munin_etc_t, mysqld_etc_t, nagios_etc_t, named_conf_t, net_conf_t, nrpe_etc_t, nslcd_conf_t, ntop_etc_t, ntp_conf_t, nut_conf_t, opendnssec_conf_t, openvpn_etc_rw_t, openvpn_etc_t, openvswitch_rw_t, oracleasm_conf_t, pads_config_t, pam_var_console_t, pdns_conf_t, pegasus_conf_t, pingd_etc_t, piranha_etc_rw_t, piranha_web_conf_t, polipo_etc_t, portreserve_etc_t, postfix_etc_t, postfix_postdrop_t, postgresql_etc_t, postgrey_etc_t, pppd_etc_t, prelude_correlator_config_t, printconf_t, proc_t, psad_etc_t, ptal_etc_t, puppet_etc_t, qmail_etc_t, rabbitmq_conf_t, radiusd_etc_t, radvd_etc_t, redis_conf_t, rhnsd_conf_t, rhsmcertd_config_t, root_t, rpm_script_tmp_t, rpm_var_cache_t, rpm_var_lib_t, rsync_etc_t, samba_etc_t, sanlock_conf_t, security_t, selinux_config_t, selinux_login_config_t, shell_exec_t, shorewall_etc_t, slapd_etc_t, snapperd_conf_t, snort_etc_t, soundd_etc_t, spamd_etc_t, squid_conf_t, src_t, ssh_home_t, sslh_config_t, sssd_conf_t, sssd_var_lib_t, stunnel_etc_t, svc_conf_t, sysfs_t, syslog_conf_t, system_conf_t, system_db_t, system_dbusd_var_lib_t, systemd_hwdb_etc_t, systemd_userdbd_runtime_t, textrel_shlib_t, tftpd_etc_t, tmp_t, tor_etc_t, tuned_etc_t, tuned_rw_etc_t, udev_etc_t, udev_var_run_t, ulogd_etc_t, user_home_dir_t, user_home_t, user_tmp_t, userhelper_conf_t, usr_t, var_lock_t, var_run_t, var_t, varnishd_etc_t, virt_etc_t, virt_var_lib_t, virtlogd_etc_t, vmware_sys_conf_t, webalizer_etc_t, xdm_etc_t, xdm_log_t, xdm_rw_etc_t, xdm_tmpfs_t, xdm_var_lib_t, xdm_var_run_t, xserver_etc_t, xserver_log_t, ypserv_conf_t, zarafa_etc_t, zebra_conf_t.
                                              Then execute:
                                              restorecon -v '/var/lib/flatpak/exports/share/applications/org.libreoffice.LibreOffice.desktop'
                                              
                                              
                                              *****  Plugin catchall (17.1 confidence) suggests   **************************
                                              
                                              If you believe that dbus-daemon should be allowed read access on the org.libreoffice.LibreOffice.desktop lnk_file by default.
                                              Then you should report this as a bug.
                                              You can generate a local policy module to allow this access.
                                              Do
                                              allow this access for now by executing:
                                              # ausearch -c 'dbus-daemon' --raw | audit2allow -M my-dbusdaemon
                                              # semodule -X 300 -i my-dbusdaemon.pp
                                              
febr 06 17:04:02 wagner setroubleshoot[1146]: AnalyzeThread.run(): Set alarm timeout to 10
febr 06 17:04:02 wagner setroubleshoot[1146]: AnalyzeThread.run(): Cancel pending alarm
febr 06 17:04:02 wagner setroubleshoot[1146]: failed to retrieve rpm info for /var/lib/flatpak/exports/share/applications/com.google.AndroidStudio.desktop