ci_hdrc_imx.ko typec.ko tcpci.ko modules under drivers/usb are missed.
Please add the extra three modules for i.MX8MM EVK board. insmod kernel/drivers/usb/typec/typec.ko.xz insmod kernel/drivers/usb/typec/tcpm/tcpm.ko.xz insmod kernel/drivers/usb/typec/tcpm/tcpci.ko.xz Thanks, Peng.
(In reply to Peng Fan from comment #1) > Please add the extra three modules for i.MX8MM EVK board. Add them to where? We already build them in the kernel.
The modules are needed when installing fedora 34 from usb disk, otherwise usb disk is not able to be detected. So I think should be added to initrd. i.MX8MM-EVK usb use typec interface, that's why we need these modules.
OK, dracut generates the initrd. Will take a look.
In best case, when I could get a new build? Will it be back ported to Fedora 34?
Is there any update?
(In reply to Peng Fan from comment #6) > Is there any update? It's on my backlog, when I know more it will be updated, if there's no update....
Hi Peter Robinson, Please add the following three modules into Fedora initrd for i.MX8MM-EVK. I test with Fedora-IoT-IoT-ostree-aarch64-34-20210423.0.iso insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/typec.ko.xz insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/tcpm/tcpm.ko.xz insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/tcpm/tcpci.ko.xz With the upper three command, I could see usb disk. Thanks, Peng.
insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/typec.ko.xz insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/tcpm/tcpm.ko.xz insmod /mnt/5.11.12-300.fc34.aarch64/kernel/drivers/usb/typec/tcpm/tcpci.ko.xz The upper three are needed both for i.MX8MM-EVK i.MX8MN-EVK in initrd. Please help integrate. Thanks, Peng.
We are going to release our firmware and send to ARM for System-Ready IR certification. So is it possible to get this done and we use the new ISO file?
Patch sent upstream
FEDORA-2021-03c5e0f32f has been submitted as an update to Fedora 35. https://bodhi.fedoraproject.org/updates/FEDORA-2021-03c5e0f32f
Proposed as a Freeze Exception for 35-final by Fedora user pbrobinson using the blocker tracking app because: Affects SystemReady IR based platforms which are an IoT Edition supported platform.
FEDORA-2021-03c5e0f32f has been pushed to the Fedora 35 testing repository. Soon you'll be able to install the update with the following command: `sudo dnf upgrade --enablerepo=updates-testing --advisory=FEDORA-2021-03c5e0f32f` You can provide feedback for this update here: https://bodhi.fedoraproject.org/updates/FEDORA-2021-03c5e0f32f See also https://fedoraproject.org/wiki/QA:Updates_Testing for more information on how to test updates.
+3 in https://pagure.io/fedora-qa/blocker-review/issue/514 , marking accepted.
FEDORA-2021-03c5e0f32f has been pushed to the Fedora 35 stable repository. If problem still persists, please make note of it in this bug report.