1997934 – VM remains in paused state when trying to write on a disk resides on iscsi [rhel.9]

RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.

Bug 1997934 - VM remains in paused state when trying to write on a disk resides on iscsi [rhel.9]

Summary: VM remains in paused state when trying to write on a disk resides on iscsi [r...

Keywords:
Status:	CLOSED ERRATA
Alias:	None
Product:	Red Hat Enterprise Linux 9
Classification:	Red Hat
Component:	qemu-kvm
Sub Component:
Version:	9.0
Hardware:	Unspecified
OS:	Unspecified
Priority:	high
Severity:	high
Target Milestone:	rc
Target Release:	---
Assignee:	Kevin Wolf
QA Contact:	qing.wang
Docs Contact:
URL:
Whiteboard:
Depends On:	1994494
Blocks:	1996131 2000568
TreeView+	depends on / blocked

Reported:	2021-08-26 06:15 UTC by qing.wang
Modified:	2022-05-17 12:28 UTC (History)
CC List:	21 users (show)
Fixed In Version:	qemu-kvm-6.2.0-1.el9
Doc Type:	If docs needed, set a value
Doc Text:
Clone Of:	1994494
Environment:
Last Closed:	2022-05-17 12:23:26 UTC
Type:	Bug
Target Upstream Version:
Embargoed:
Dependent Products:

Attachments	(Terms of Use)

Links
System	ID	Private	Priority	Status	Summary	Last Updated
Red Hat Issue Tracker	RHELPLAN-95251	0	None	None	None	2021-08-26 06:16:03 UTC
Red Hat Product Errata	RHBA-2022:2307	0	None	None	None	2022-05-17 12:24:43 UTC

Comment 1 qing.wang 2021-08-26 06:26:55 UTC

Reproduce this bug on

Red Hat Enterprise Linux release 9.0 Beta (Plow)
5.14.0-0.rc6.46.el9.x86_64
qemu-kvm-common-6.0.0-12.el9.x86_64

It should have same reason https://bugzilla.redhat.com/show_bug.cgi?id=1994494


http://fileshare.englab.nay.redhat.com/pub/section2/images_backup/qbugs/1997934/2021-08-26/strace.log

Sometimes it will crash on writing qcow2 disk

#0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
[Current thread is 1 (Thread 0x7f5a19733640 (LWP 54119))]
(gdb) bt
#0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
#1  0x00007f5a1d96b686 in raise () from /lib64/libc.so.6
#2  0x00007f5a1d9557d3 in abort () from /lib64/libc.so.6
#3  0x00007f5a1d9556fb in __assert_fail_base.cold () from /lib64/libc.so.6
#4  0x00007f5a1d9643a6 in __assert_fail () from /lib64/libc.so.6
#5  0x00005611e45a7634 in qemu_iovec_init_extended (qiov=<optimized out>, 
    head_buf=<optimized out>, head_len=<optimized out>, mid_qiov=<optimized out>, 
    mid_offset=140015594093200, mid_len=0, tail_buf=0x0, tail_len=0) at ../util/iov.c:428
#6  0x00005611e4422abe in qemu_iovec_init_slice (qiov=<optimized out>, source=0x7f5a10025e18, 
    offset=0, len=36864) at ../util/iov.c:515
#7  bdrv_driver_pwritev (bs=0x5611e5a0f400, offset=888500224, bytes=36864, qiov=0x7f5a10025e18, 
    qiov_offset=<optimized out>, flags=0) at ../block/io.c:1227
#8  0x00005611e442435c in bdrv_aligned_pwritev (child=0x5611e58c1c80, req=0x7f57ebafaf58, 
    offset=888500224, bytes=<optimized out>, align=<optimized out>, qiov=0x7f5a10025e18, 
    qiov_offset=0, flags=<optimized out>) at ../block/io.c:2089
#9  0x00005611e4423793 in bdrv_co_pwritev_part (child=<optimized out>, offset=<optimized out>, 
    bytes=<optimized out>, qiov=<optimized out>, qiov_offset=<optimized out>, 
    flags=<optimized out>) at ../block/io.c:2273
#10 0x00005611e441297a in qcow2_co_pwritev_task (bs=0x5611e5a136b0, host_offset=888500224, 
    offset=<optimized out>, bytes=<optimized out>, qiov=0x7f5a10025e18, qiov_offset=0, l2meta=0x0)
    at ../block/qcow2.c:2535
--Type <RET> for more, q to quit, c to continue without paging--c
#11 qcow2_co_pwritev_task_entry (task=<optimized out>) at ../block/qcow2.c:2565
#12 0x00005611e4428225 in aio_task_co (opaque=0x7f5a100116a0) at ../block/aio_task.c:45
#13 0x00005611e457b346 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at ../util/coroutine-ucontext.c:173


Test steps:

1.build iscis target server
root@dell-per440-07 /home/tmp $ targetcli ls
o- / ........................................................................................... [...]
  o- backstores ................................................................................ [...]
  | o- block .................................................................... [Storage Objects: 0]
  | o- fileio ................................................................... [Storage Objects: 1]
  | | o- one ................................... [/home/iscsi/onex.img (15.0GiB) write-back activated]
  | |   o- alua ..................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ......................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................... [Storage Objects: 0]
  | o- ramdisk .................................................................. [Storage Objects: 0]
  o- iscsi .............................................................................. [Targets: 1]
  | o- iqn.2016-06.one.server:one-a ........................................................ [TPGs: 1]
  |   o- tpg1 ................................................................. [no-gen-acls, no-auth]
  |     o- acls ............................................................................ [ACLs: 2]
  |     | o- iqn.1994-05.com.redhat:clienta ......................................... [Mapped LUNs: 1]
  |     | | o- mapped_lun0 .................................................... [lun0 fileio/one (rw)]
  |     | o- iqn.1994-05.com.redhat:clientb ......................................... [Mapped LUNs: 1]
  |     |   o- mapped_lun0 .................................................... [lun0 fileio/one (rw)]
  |     o- luns ............................................................................ [LUNs: 1]
  |     | o- lun0 ............................. [fileio/one (/home/iscsi/onex.img) (default_tg_pt_gp)]
  |     o- portals ...................................................................... [Portals: 1]
  |       o- 0.0.0.0:3260 ....................................................................... [OK]
  o- loopback ........................................................................... [Targets: 0]

2.attach iscsi disk on host
iscsiadm -m discovery -t st -p 127.0.0.1
iscsiadm -m node -T iqn.2016-06.one.server:one-a  -p 127.0.0.1:3260 -l

3.change the value to 64 on the attached disk

echo 64 > /sys/block/sdd/queue/max_sectors_kb

4.create lvms on the disk
pvcreate /dev/sdd
vgcreate vg /dev/sdd

lvcreate -L 2560M -n lv1 vg;lvcreate -L 2560M -n lv2 vg
lvcreate -L 2560M -n lv3 vg;lvcreate -L 2560M -n lv4 vg


qemu-img create -f qcow2 /dev/vg/lv1 2G;qemu-img create -f qcow2 /dev/vg/lv2 2G

qemu-img create -f qcow2 /dev/vg/lv3 2G;qemu-img create -f qcow2 /dev/vg/lv4 2G
 
5.boot the vm with two lvm as blk device



/usr/libexec/qemu-kvm \
  -name src_vm1 \
  -machine pc-q35-rhel8.4.0,accel=kvm,usb=off,dump-guest-core=off \
  -m 8g \
  \
  -device pcie-root-port,id=pcie.0-root-port-2,slot=2,bus=pcie.0,multifunction=on \
  -device pcie-root-port,id=pcie.0-root-port-3,slot=3,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-4,slot=4,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-5,slot=5,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-6,slot=6,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-7,slot=7,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-8,slot=8,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-9,slot=9,bus=pcie.0 \
  -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \
  -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \
  -object iothread,id=iothread0 \
  -object iothread,id=iothread1 \
  -device virtio-scsi-pci,id=scsi0,bus=pcie.0-root-port-3,addr=0x0,iothread=iothread0 \
  -device virtio-scsi-pci,id=scsi1,bus=pcie.0-root-port-8,addr=0x0 \
  -blockdev driver=qcow2,file.driver=file,cache.direct=off,cache.no-flush=on,file.filename=/home/kvm_autotest_root/images/rhel840-64-virtio-scsi.qcow2,node-name=drive_image1 \
  -device scsi-hd,id=os1,drive=drive_image1,bootindex=0 \
  \
   -blockdev node-name=host_device_stg,driver=host_device,aio=native,filename=/dev/vg/lv1,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg,driver=raw,cache.direct=on,cache.no-flush=off,file=host_device_stg \
  -device virtio-blk-pci,iothread=iothread1,bus=pcie.0-root-port-4,addr=0x0,write-cache=on,id=stg,drive=drive_stg,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg2,driver=host_device,aio=native,filename=/dev/vg/lv2,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg2,driver=qcow2,cache.direct=on,cache.no-flush=off,file=host_device_stg2 \
  -device virtio-blk-pci,iothread=iothread1,bus=pcie.0-root-port-5,addr=0x0,write-cache=on,id=stg2,drive=drive_stg2,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg3,driver=host_device,aio=native,filename=/dev/vg/lv3,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg3,driver=raw,cache.direct=on,cache.no-flush=off,file=host_device_stg3 \
  -device scsi-hd,write-cache=on,id=stg3,drive=drive_stg3,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg4,driver=host_device,aio=native,filename=/dev/vg/lv4,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg4,driver=qcow2,cache.direct=on,cache.no-flush=off,file=host_device_stg4 \
  -device scsi-hd,write-cache=on,id=stg4,drive=drive_stg4,rerror=stop,werror=stop \
\
  \
  -vnc :5 \
  -qmp tcp:0:5955,server,nowait \
  -monitor stdio \
  -device virtio-net-pci,mac=9a:b5:b6:b1:b4:b5,id=idMmq1jH,vectors=4,netdev=idxgXAlm,bus=pcie.0-root-port-6,addr=0x0 \
  -netdev tap,id=idxgXAlm


6.execute io on disks in guest

root@bootp-73-199-218 /home $ cat test.sh 
for i in $(seq 100); do
    printf "pass %03d ... " $i
    dd if=/dev/zero bs=1M count=2048 of=$1 conv=fsync status=none
    if [[ "$?" != "0" ]];then break;fi
    echo "ok"
  done

./test.sh /dev/vda
./test.sh /dev/vdb
./test.sh /dev/sdb
./test.sh /dev/sdc

Comment 4 Nir Soffer 2021-09-01 09:25:18 UTC

(In reply to qing.wang from comment #1)
...
> Sometimes it will crash on writing qcow2 disk
> 
> #0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
> [Current thread is 1 (Thread 0x7f5a19733640 (LWP 54119))]
> (gdb) bt
> #0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
> #1  0x00007f5a1d96b686 in raise () from /lib64/libc.so.6
> #2  0x00007f5a1d9557d3 in abort () from /lib64/libc.so.6
> #3  0x00007f5a1d9556fb in __assert_fail_base.cold () from /lib64/libc.so.6
> #4  0x00007f5a1d9643a6 in __assert_fail () from /lib64/libc.so.6
> #5  0x00005611e45a7634 in qemu_iovec_init_extended (qiov=<optimized out>, 
>     head_buf=<optimized out>, head_len=<optimized out>, mid_qiov=<optimized

This is assert() failure in qemu, it is not the same issue as bug 1994494.
Why this bug depends on bug 1994494?

...
> root@bootp-73-199-218 /home $ cat test.sh 
> for i in $(seq 100); do
>     printf "pass %03d ... " $i
>     dd if=/dev/zero bs=1M count=2048 of=$1 conv=fsync status=none
>     if [[ "$?" != "0" ]];then break;fi
>     echo "ok"
>   done
> 
> ./test.sh /dev/vda
> ./test.sh /dev/vdb
> ./test.sh /dev/sdb
> ./test.sh /dev/sdc

The fact that the same test script reproduce this bug does not mean that the
root cause is the same.

Comment 5 qing.wang 2021-09-01 10:19:19 UTC

(In reply to Nir Soffer from comment #4)
> (In reply to qing.wang from comment #1)
> ...
> > Sometimes it will crash on writing qcow2 disk
> > 
> > #0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
> > [Current thread is 1 (Thread 0x7f5a19733640 (LWP 54119))]
> > (gdb) bt
> > #0  0x00007f5a1d9b8763 in pthread_kill.5 () from /lib64/libc.so.6
> > #1  0x00007f5a1d96b686 in raise () from /lib64/libc.so.6
> > #2  0x00007f5a1d9557d3 in abort () from /lib64/libc.so.6
> > #3  0x00007f5a1d9556fb in __assert_fail_base.cold () from /lib64/libc.so.6
> > #4  0x00007f5a1d9643a6 in __assert_fail () from /lib64/libc.so.6
> > #5  0x00005611e45a7634 in qemu_iovec_init_extended (qiov=<optimized out>, 
> >     head_buf=<optimized out>, head_len=<optimized out>, mid_qiov=<optimized
> 
> This is assert() failure in qemu, it is not the same issue as bug 1994494.
> Why this bug depends on bug 1994494?
> 
> ...
> > root@bootp-73-199-218 /home $ cat test.sh 
> > for i in $(seq 100); do
> >     printf "pass %03d ... " $i
> >     dd if=/dev/zero bs=1M count=2048 of=$1 conv=fsync status=none
> >     if [[ "$?" != "0" ]];then break;fi
> >     echo "ok"
> >   done
> > 
> > ./test.sh /dev/vda
> > ./test.sh /dev/vdb
> > ./test.sh /dev/sdb
> > ./test.sh /dev/sdc
> 
> The fact that the same test script reproduce this bug does not mean that the
> root cause is the same.

1994494 comment 0 just report the format raw, and the qcow2 issue is reported https://bugzilla.redhat.com/show_bug.cgi?id=1994494#c66.
Discuss with kevin, they should be same reason and  have verified in 1994494.

Comment 8 Kevin Wolf 2021-11-08 16:14:33 UTC

We'll get the fix with the 6.2 rebase.

Comment 11 Yanan Fu 2021-12-20 12:44:47 UTC

QE bot(pre verify): Set 'Verified:Tested,SanityOnly' as gating/tier1 test pass.

Comment 12 qing.wang 2021-12-21 05:59:52 UTC

Passed test on 
Red Hat Enterprise Linux release 9.0 Beta (Plow)
5.14.0-30.el9.x86_64
qemu-kvm-6.2.0-1.el9.x86_64
seabios-bin-1.14.0-7.el9.noarch
edk2-ovmf-20210527gite1999b264f1f-7.el9.noarch

Test steps

Test steps:

1.build iscis target server
root@dell-per440-07 /home/tmp $ targetcli ls
o- / ........................................................................................... [...]
  o- backstores ................................................................................ [...]
  | o- block .................................................................... [Storage Objects: 0]
  | o- fileio ................................................................... [Storage Objects: 1]
  | | o- one ................................... [/home/iscsi/onex.img (20.0GiB) write-back activated]
  | |   o- alua ..................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ......................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................... [Storage Objects: 0]
  | o- ramdisk .................................................................. [Storage Objects: 0]
  o- iscsi .............................................................................. [Targets: 1]
  | o- iqn.2016-06.one.server:one-a ........................................................ [TPGs: 1]
  |   o- tpg1 ................................................................. [no-gen-acls, no-auth]
  |     o- acls ............................................................................ [ACLs: 2]
  |     | o- iqn.1994-05.com.redhat:clienta ......................................... [Mapped LUNs: 1]
  |     | | o- mapped_lun0 .................................................... [lun0 fileio/one (rw)]
  |     | o- iqn.1994-05.com.redhat:clientb ......................................... [Mapped LUNs: 1]
  |     |   o- mapped_lun0 .................................................... [lun0 fileio/one (rw)]
  |     o- luns ............................................................................ [LUNs: 1]
  |     | o- lun0 ............................. [fileio/one (/home/iscsi/onex.img) (default_tg_pt_gp)]
  |     o- portals ...................................................................... [Portals: 1]
  |       o- 0.0.0.0:3260 ....................................................................... [OK]
  o- loopback ........................................................................... [Targets: 0]

2.attach iscsi disk on host
iscsiadm -m discovery -t st -p 127.0.0.1
iscsiadm -m node -T iqn.2016-06.one.server:one-a  -p 127.0.0.1:3260 -l

3.change the value to 64 on the attached disk

echo 64 > /sys/block/sdd/queue/max_sectors_kb

4.create lvms on the disk
pvcreate /dev/sdd
vgcreate vg /dev/sdd

lvcreate -L 3G -n lv1 vg;lvcreate -L 3G -n lv2 vg
lvcreate -L 3G -n lv3 vg;lvcreate -L 3G -n lv4 vg


qemu-img create -f qcow2 /dev/vg/lv1 3G;qemu-img create -f qcow2 /dev/vg/lv2 3G

qemu-img create -f qcow2 /dev/vg/lv3 3G;qemu-img create -f qcow2 /dev/vg/lv4 3G
 
5.boot the vm with two lvm as blk device



/usr/libexec/qemu-kvm \
  -name src_vm1 \
  -machine pc-q35-rhel8.4.0,accel=kvm,usb=off,dump-guest-core=off \
  -m 8g \
  \
  -device pcie-root-port,id=pcie.0-root-port-2,slot=2,bus=pcie.0,multifunction=on \
  -device pcie-root-port,id=pcie.0-root-port-3,slot=3,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-4,slot=4,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-5,slot=5,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-6,slot=6,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-7,slot=7,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-8,slot=8,bus=pcie.0 \
  -device pcie-root-port,id=pcie.0-root-port-9,slot=9,bus=pcie.0 \
  -device qemu-xhci,id=usb1,bus=pcie.0-root-port-2,addr=0x0 \
  -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \
  -object iothread,id=iothread0 \
  -object iothread,id=iothread1 \
  -device virtio-scsi-pci,id=scsi0,bus=pcie.0-root-port-3,addr=0x0,iothread=iothread0 \
  -device virtio-scsi-pci,id=scsi1,bus=pcie.0-root-port-8,addr=0x0 \
  -blockdev driver=qcow2,file.driver=file,cache.direct=off,cache.no-flush=on,file.filename=/home/kvm_autotest_root/images/rhel840-64-virtio-scsi.qcow2,node-name=drive_image1 \
  -device scsi-hd,id=os1,drive=drive_image1,bootindex=0 \
  \
   -blockdev node-name=host_device_stg,driver=host_device,aio=native,filename=/dev/vg/lv1,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg,driver=raw,cache.direct=on,cache.no-flush=off,file=host_device_stg \
  -device virtio-blk-pci,iothread=iothread1,bus=pcie.0-root-port-4,addr=0x0,write-cache=on,id=stg,drive=drive_stg,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg2,driver=host_device,aio=native,filename=/dev/vg/lv2,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg2,driver=qcow2,cache.direct=on,cache.no-flush=off,file=host_device_stg2 \
  -device virtio-blk-pci,iothread=iothread1,bus=pcie.0-root-port-5,addr=0x0,write-cache=on,id=stg2,drive=drive_stg2,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg3,driver=host_device,aio=native,filename=/dev/vg/lv3,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg3,driver=raw,cache.direct=on,cache.no-flush=off,file=host_device_stg3 \
  -device scsi-hd,write-cache=on,id=stg3,drive=drive_stg3,rerror=stop,werror=stop \
\
 -blockdev node-name=host_device_stg4,driver=host_device,aio=native,filename=/dev/vg/lv4,cache.direct=on,cache.no-flush=off,discard=unmap \
  -blockdev node-name=drive_stg4,driver=qcow2,cache.direct=on,cache.no-flush=off,file=host_device_stg4 \
  -device scsi-hd,write-cache=on,id=stg4,drive=drive_stg4,rerror=stop,werror=stop \
\
  \
  -vnc :5 \
  -qmp tcp:0:5955,server,nowait \
  -monitor stdio \
  -device virtio-net-pci,mac=9a:b5:b6:b1:b4:b5,id=idMmq1jH,vectors=4,netdev=idxgXAlm,bus=pcie.0-root-port-6,addr=0x0 \
  -netdev tap,id=idxgXAlm


6.execute io on disks in guest

root@bootp-73-199-218 /home $ cat test.sh 
for i in $(seq 100); do
    dd if=/dev/zero bs=1M count=2048 of=$1 conv=fsync status=none
done

./test.sh /dev/vda
./test.sh /dev/vdb
./test.sh /dev/sdb
./test.sh /dev/sdc

Comment 15 qing.wang 2021-12-23 06:02:00 UTC

Passed test refer to
https://bugzilla.redhat.com/show_bug.cgi?id=1997934#c12

Comment 18 errata-xmlrpc 2022-05-17 12:23:26 UTC

Since the problem described in this bug report should be
resolved in a recent advisory, it has been closed with a
resolution of ERRATA.

For information on the advisory (new packages: qemu-kvm), and where to find the updated
files, follow the link below.

If the solution does not work for you, open a new bug report.

https://access.redhat.com/errata/RHBA-2022:2307

Note You need to log in before you can comment on or make changes to this bug.

ahadas
berrange
bugs
bzlotnik
coli
eshames
hreitz
jinzhao
juzhang
kkiwi
kwolf
lsvaty
mrezanin
mtessun
nsoffer
pkrempa
qinwang
sshmulev
stefanha
virt-maint
ymankad