Note: This bug is displayed in read-only format because
the product is no longer active in Red Hat Bugzilla.
RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
Description of problem: The "show ip ospf interface" command does not show designated router info. It shows BDR info, but not DR.
Version-Release number of selected component (if applicable):
frr-7.5-4.el8.x86_64
How reproducible:
always
Steps to Reproduce:
1. start frr with ospfd running
2. view vtysh results from "show ip ospf interface"
3.
Actual results:
no DR info is shown, only BDR
Expected results:
Info about the DR & BRD should both be shown
Additional info:
This upstream patch should fix the problem: https://github.com/FRRouting/frr/commit/2fbb8f4543712088f01432172bd23b274c4db7f0
This bug is also present in Fedora 34. On my laptop, I configured a very simple OSPF configuration:
router ospf
passive-interface default
network 192.168.1.0/24 area 0
Then vtysh -c "show ip ospf interface" shows:
wlp0s20u2 is up
ifindex 5, MTU 2312 bytes, BW 0 Mbit <UP,BROADCAST,RUNNING,MULTICAST>
Internet Address 192.168.1.157/24, Broadcast 192.168.1.255, Area 0.0.0.0
MTU mismatch detection: enabled
Router ID 192.168.124.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
No backup designated router on this network
Multicast group memberships: <None>
Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
No Hellos (Passive interface)
Neighbor Count is 0, Adjacent neighbor count is 0
Since the problem described in this bug report should be
resolved in a recent advisory, it has been closed with a
resolution of ERRATA.
For information on the advisory (frr bug fix and enhancement update), and where to find the updated
files, follow the link below.
If the solution does not work for you, open a new bug report.
https://access.redhat.com/errata/RHBA-2022:1778