Description of problem:
Hotplug two vdisks on source host, then migrate guest. After migration, guest would hit call trace when reboot, finally fail to reboot.


Version-Release number of selected component (if applicable):
hosts info: kernel-5.14.0-55.el9.x86_64 & qemu-kvm-6.2.0-7.el9.x86_64
guest info: kernel-4.18.0-364.el8.x86_64


How reproducible:
3/3


Steps to Reproduce:
1.Boot a guest with below qemu cmds[1]
2.Hot add two disk in guest:
2.1 Create two image on src host
# qemu-img create -f qcow2 /mnt/nfs/data-disk0.qcow2 10G
# qemu-img create -f qcow2 /mnt/nfs/data-disk1.qcow2 20G
2.2 Hot plug the above disks
{"execute": "blockdev-add", "arguments": {"node-name": "drive_d0", "driver": "file", "filename": "//mnt/nfs/data-disk0.qcow2"}, "id": "mq3QNZ1Z"}
{"return": {}, "id": "mq3QNZ1Z"}
{"execute": "blockdev-add", "arguments": {"node-name": "drive_d00", "driver": "qcow2", "file": "drive_d0"}, "id": "CoT6x2aF"}
{"return": {}, "id": "CoT6x2aF"}
{"execute": "device_add", "arguments": {"driver": "virtio-blk-pci", "drive": "drive_d00", "id": "data_d0", "bus": "extra_root1"}, "id": "rytH1O52"}
{"return": {}, "id": "rytH1O52"}
{"execute": "blockdev-add", "arguments": {"node-name": "drive_d1", "driver": "file", "filename": "//mnt/nfs/data-disk1.qcow2"}, "id": "QxilkKL2"}
{"return": {}, "id": "QxilkKL2"}
{"execute": "blockdev-add", "arguments": {"node-name": "drive_d11", "driver": "qcow2", "file": "drive_d1"}, "id": "4bsH4oTs"}
{"return": {}, "id": "4bsH4oTs"}
{"execute": "device_add", "arguments": {"driver": "virtio-scsi-pci", "id": "virtio_scsi_pci1", "bus": "extra_root2"}, "id": "D7vw4TPp"}
{"return": {}, "id": "D7vw4TPp"}
{"execute": "device_add", "arguments": {"driver": "scsi-hd", "drive": "drive_d11", "id": "data_d1", "bus": "virtio_scsi_pci1.0", "channel": "0", "scsi-id": "0", "lun": "1"}, "id": "lLNbK3RU"}
{"return": {}, "id": "lLNbK3RU"}
2.3 Check the hot plug disk on src guest through {"execute": "query-block"}, they hotplugged successfully.
3.Boot '-incoming mode' guest with disk added in step2 on dst host:
-device virtio-blk-pci,drive=drive_d00,id=data_d0,bus=extra_root1 \
-device virtio-scsi-pci,id=virtio_scsi_pci1,bus=extra_root2 \
-device scsi-hd,drive=drive_d11,id=data_d1,bus=virtio_scsi_pci1.0,channel=0,scsi-id=0,lun=1 \
-blockdev driver=file,cache.direct=on,cache.no-flush=off,filename=//mnt/nfs/data-disk0.qcow2,node-name=drive_d0 \
-blockdev driver=qcow2,node-name=drive_d00,file=drive_d0 \
-blockdev driver=file,cache.direct=on,cache.no-flush=off,filename=//mnt/nfs/data-disk1.qcow2,node-name=drive_d1 \
-blockdev driver=qcow2,node-name=drive_d11,file=drive_d1 \
4.Migrate guest from source to dst host, migration succeed.
5.Check vdisk on dst host through {"execute": "query-block"}, they're in guest.
6.Reboot guest on dst host


Actual results:
Guest hit call trace and fail to reboot after step 6:
2022-02-08-09:10:55: [K[  [0;31m*[0;1;31m*[0m[0;31m* [0m] A stop job is running for Monitorin…gress polling (4min 36s / 6min 2s)
2022-02-08-09:10:55: [  368.523176] INFO: task lvm:2975 blocked for more than 120 seconds.
2022-02-08-09:10:55: [  368.525398]       Tainted: G               X --------- -  - 4.18.0-364.el8.x86_64 #1
2022-02-08-09:10:55: [  368.526741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
2022-02-08-09:10:55: [  368.528052] task:lvm             state:D stack:    0 pid: 2975 ppid:     1 flags:0x00004084
2022-02-08-09:10:55: [  368.529246] Call Trace:
2022-02-08-09:10:55: [  368.529847]  __schedule+0x2d1/0x830
2022-02-08-09:10:55: [  368.530775]  ? __switch_to_asm+0x35/0x70
2022-02-08-09:10:55: [  368.531729]  ? __switch_to_asm+0x41/0x70
2022-02-08-09:10:55: [  368.532681]  schedule+0x35/0xa0
2022-02-08-09:10:55: [  368.533496]  schedule_timeout+0x274/0x300
2022-02-08-09:10:55: [  368.534331]  ? __schedule+0x2d9/0x830
2022-02-08-09:10:55: [  368.535009]  ? check_preempt_curr+0x62/0x90
2022-02-08-09:10:55: [  368.535966]  wait_for_completion+0x96/0x100
2022-02-08-09:10:55: [  368.536899]  flush_work+0x11d/0x1c0
2022-02-08-09:10:55: [  368.537776]  ? worker_attach_to_pool+0xb0/0xb0
2022-02-08-09:10:55: [  368.538711]  ? __virtscsi_add_cmd+0x148/0x270 [virtio_scsi]
2022-02-08-09:10:55: [  368.539721]  ? work_busy+0x80/0x80
2022-02-08-09:10:55: [  368.540538]  __cancel_work_timer+0x105/0x190
2022-02-08-09:10:55: [  368.541338]  ? xas_load+0x8/0x80
2022-02-08-09:10:55: [  368.541925]  ? xa_load+0x48/0x90
2022-02-08-09:10:55: [  368.542691]  disk_block_events+0x6f/0x90
2022-02-08-09:10:55: [  368.543523]  blkdev_get+0x187/0x2c0
2022-02-08-09:10:55: [  368.544175]  ? igrab+0x31/0x50
2022-02-08-09:10:55: [  368.544726]  ? bd_acquire+0xd0/0xd0
2022-02-08-09:10:55: [  368.545480]  do_dentry_open+0x132/0x340
2022-02-08-09:10:55: [  368.546092]  path_openat+0x53e/0x14f0
2022-02-08-09:10:55: [  368.546689]  ? blk_mq_request_issue_directly+0x4e/0xb0
2022-02-08-09:10:55: [  368.547575]  do_filp_open+0x93/0x100
2022-02-08-09:10:55: [  368.548244]  ? getname_flags+0x4a/0x1e0
2022-02-08-09:10:55: [  368.548859]  ? __check_object_size+0xa8/0x16b
2022-02-08-09:10:55: [  368.549643]  do_sys_open+0x184/0x220
2022-02-08-09:10:55: [  368.550304]  do_syscall_64+0x5b/0x1a0
2022-02-08-09:10:55: [  368.550866]  entry_SYSCALL_64_after_hwframe+0x65/0xca
2022-02-08-09:10:55: [  368.551699] RIP: 0033:0x7f4608b9e272
2022-02-08-09:10:55: [  368.552378] Code: Unable to access opcode bytes at RIP 0x7f4608b9e248.
2022-02-08-09:10:55: [  368.553255] RSP: 002b:00007ffeb91476b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
2022-02-08-09:10:55: [  368.554208] RAX: ffffffffffffffda RBX: 000055ead6896b80 RCX: 00007f4608b9e272
2022-02-08-09:10:55: [  368.555063] RDX: 0000000000044000 RSI: 000055ead6897768 RDI: 00000000ffffff9c
2022-02-08-09:10:55: [  368.555913] RBP: 00000000ffffffff R08: 000055ead6b0d000 R09: 000055ead6900ce0
2022-02-08-09:10:55: [  368.556930] R10: 0000000000000000 R11: 0000000000000246 R12: 000055ead6897768
2022-02-08-09:10:55: [  368.557915] R13: 0000000000044000 R14: 000055ead6aac720 R15: 00007ffeb9148a00


Expected results:
Guest works well after migration, reboot can succeed.


Additional info:
1.Didn't hit guest call trace if no migration like: hotplug two vdisks on src host, then reboot guest on src host, guest succeeds to reboot.
2.Will confirm whether rhel9 hit this bug, and it's a regression issue.

Qemu command line:
/usr/libexec/qemu-kvm  \
-name "mouse-vm" \
-sandbox on \
-machine q35,memory-backend=pc.ram \
-cpu Icelake-Server,ss=on,vmx=on,pdcm=on,hypervisor=on,tsc-adjust=on,avx512ifma=on,sha-ni=on,waitpkg=on,rdpid=on,cldemote=on,movdiri=on,movdir64b=on,fsrm=on,md-clear=on,stibp=on,arch-capabilities=on,avx-vnni=on,avx512-bf16=on,xsaves=on,ibpb=on,ibrs=on,amd-stibp=on,amd-ssbd=on,rdctl-no=on,ibrs-all=on,skip-l1dfl-vmentry=on,mds-no=on,pschange-mc-no=on,tsx-ctrl=on,hle=off,rtm=off,mpx=off,intel-pt=off,kvm_pv_unhalt=on \
-nodefaults  \
-chardev socket,id=qmp_id_qmpmonitor1,path=/var/tmp/monitor-qmpmonitor1,server=on,wait=off \
-chardev socket,id=qmp_id_catch_monitor,path=/var/tmp/monitor-catch_monitor,server=on,wait=off \
-mon chardev=qmp_id_qmpmonitor1,mode=control \
-mon chardev=qmp_id_catch_monitor,mode=control \
-device pcie-root-port,port=0x10,chassis=1,id=root0,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=0x11,chassis=2,id=root1,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=0x12,chassis=3,id=root2,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=0x13,chassis=4,id=root3,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=0x14,chassis=5,id=root4,bus=pcie.0,addr=0x2.0x4 \
-device pcie-root-port,port=0x15,chassis=6,id=root5,bus=pcie.0,addr=0x2.0x5 \
-device pcie-root-port,port=0x16,chassis=7,id=root6,bus=pcie.0,addr=0x2.0x6 \
-device pcie-root-port,port=0x17,chassis=8,id=root7,bus=pcie.0,addr=0x2.0x7 \
-device pcie-root-port,port=0x20,chassis=21,id=extra_root0,bus=pcie.0,multifunction=on,addr=0x3 \
-device pcie-root-port,port=0x21,chassis=22,id=extra_root1,bus=pcie.0,addr=0x3.0x1 \
-device pcie-root-port,port=0x22,chassis=23,id=extra_root2,bus=pcie.0,addr=0x3.0x2 \
-device nec-usb-xhci,id=usb1,bus=root0,addr=0x0 \
-device virtio-scsi-pci,id=virtio_scsi_pci0,bus=root1,addr=0x0 \
-device scsi-hd,id=image1,drive=drive_image1,bus=virtio_scsi_pci0.0,channel=0,scsi-id=0,lun=0,bootindex=0,write-cache=on \
-device virtio-net-pci,mac=9a:8a:8b:8c:8d:8e,id=net0,netdev=tap0,bus=root2,addr=0x0 \
-device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \
-device virtio-balloon-pci,id=balloon0,bus=root3,addr=0x0 \
-device VGA,id=video0,vgamem_mb=16,bus=pcie.0,addr=0x1 \
-blockdev driver=file,auto-read-only=on,discard=unmap,aio=threads,cache.direct=on,cache.no-flush=off,filename=/mnt/nfs/rhel860-64-virtio-scsi.qcow2,node-name=drive_sys1 \
-blockdev driver=qcow2,node-name=drive_image1,read-only=off,cache.direct=on,cache.no-flush=off,file=drive_sys1 \
-netdev tap,id=tap0,vhost=on \
-m 4096 \
-object memory-backend-ram,id=pc.ram,size=4096M \
-smp 4,maxcpus=4,cores=2,threads=1,sockets=2 \
-vnc :10 \
-rtc base=utc,clock=host \
-boot menu=off,strict=off,order=cdn,once=c \
-enable-kvm  \
-qmp tcp:0:3333,server=on,wait=off \
-qmp tcp:0:9999,server=on,wait=off \
-qmp tcp:0:9888,server=on,wait=off \
-serial tcp:0:4444,server=on,wait=off \
-monitor stdio \
-msg timestamp=on \