Releases retrieved: 2.0.0 Upstream release that is considered latest: 2.0.0 Current version/release in rawhide: 1.10.0-3.fc36 URL: http://www.gnu.org/software/gsasl/ Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://fedoraproject.org/wiki/Upstream_release_monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1563/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/libgsasl
Scratch build failed. Details below: BuilderException: Build failed: Command '['rpmbuild', '-D', '_sourcedir .', '-D', '_topdir .', '-bs', '/var/tmp/thn-vea2t92w/libgsasl.spec']' returned non-zero exit status 1. StdOut: error: Bad source: ./libgsasl-2.0.0.tar.gz: No such file or directory Traceback: File "/usr/local/lib/python3.10/site-packages/hotness/use_cases/package_scratch_build_use_case.py", line 56, in build result = self.builder.build(request.package, request.opts) File "/usr/local/lib/python3.10/site-packages/hotness/builders/koji.py", line 188, in build raise BuilderException( If you think this issue is caused by some bug in the-new-hotness, please report it on the-new-hotness issue tracker: https://github.com/fedora-infra/the-new-hotness/issues
Releases retrieved: 2.0.1 Upstream release that is considered latest: 2.0.1 Current version/release in rawhide: 1.10.0-3.fc36 URL: https://www.gnu.org/software/gsasl/ Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://fedoraproject.org/wiki/Upstream_release_monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1563/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/libgsasl
Scratch build failed. Details below: BuilderException: Build failed: Command '['rpmbuild', '-D', '_sourcedir .', '-D', '_topdir .', '-bs', '/var/tmp/thn-l25lcy_0/libgsasl.spec']' returned non-zero exit status 1. StdOut: error: Bad source: ./libgsasl-2.0.1.tar.gz: No such file or directory Traceback: File "/usr/local/lib/python3.10/site-packages/hotness/use_cases/package_scratch_build_use_case.py", line 56, in build result = self.builder.build(request.package, request.opts) File "/usr/local/lib/python3.10/site-packages/hotness/builders/koji.py", line 188, in build raise BuilderException( If you think this issue is caused by some bug in the-new-hotness, please report it on the-new-hotness issue tracker: https://github.com/fedora-infra/the-new-hotness/issues
Releases retrieved: 2.2.0 Upstream release that is considered latest: 2.2.0 Current version/release in rawhide: 1.10.0-4.fc37 URL: https://www.gnu.org/software/gsasl/ Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://fedoraproject.org/wiki/Upstream_release_monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1563/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/libgsasl
Scratch build failed. Details below: BuilderException: Build failed: Command '['rpmbuild', '-D', '_sourcedir .', '-D', '_topdir .', '-bs', '/var/tmp/thn-xs7xxgys/libgsasl.spec']' returned non-zero exit status 1. StdOut: error: Bad source: ./libgsasl-2.2.0.tar.gz: No such file or directory Traceback: File "/usr/local/lib/python3.10/site-packages/hotness/use_cases/package_scratch_build_use_case.py", line 56, in build result = self.builder.build(request.package, request.opts) File "/usr/local/lib/python3.10/site-packages/hotness/builders/koji.py", line 188, in build raise BuilderException( If you think this issue is caused by some bug in the-new-hotness, please report it on the-new-hotness issue tracker: https://github.com/fedora-infra/the-new-hotness/issues
Hey, just wondering if you have any plans to update this (before F38 perhaps)? I ran some queries: $ sudo dnf repoquery --whatrequires libgsasl $ sudo dnf repoquery --whatrequires 'libgsasl(x86-64)' $ sudo dnf repoquery --whatrequires 'libgsasl.so.7()(64bit)' $ sudo dnf repoquery --whatrequires 'libgsasl.so.7(LIBGSASL_1.1)(64bit)' $ sudo dnf repoquery --whatrequires 'libgsasl.so.7(LIBGSASL_1.4)(64bit)' $ sudo dnf repoquery --whatrequires 'libgsasl.so.7(LIBGSASL_1.10)(64bit)' and it looks like the following depend on this: erlang-esasl-0:0.1-35.20120116git665cc80.fc37.x86_64 exim-0:4.96-6.fc37.x86_64 jabberd-0:2.6.1-22.fc37.x86_64 jreen-0:1.2.1-22.fc37.x86_64 jreen-qt5-0:1.2.1-22.fc37.x86_64 libgsasl-devel-0:1.10.0-4.fc37.x86_64 msmtp-0:1.8.22-1.fc37.x86_64 pokerth-0:1.1.2-23.fc37.x86_64 tin-0:2.6.2-1.fc37.x86_64 Note that it appears that upstream merged gsasl and libgsasl, so this package might need to be renamed, or perhaps could be a new one that is parallel-installable with the v1 here.
As a test, I've built libgsasl-2.2.0 (with a poorly updated spec), and then built the above list of dependents in a copr: https://copr.fedorainfracloud.org/coprs/qulogic/libgsasl2/ AFAICT, nothing was broken by this update (only jreen failed to build, but it was for an unrelated reason.)
Releases retrieved: 2.2.1 Upstream release that is considered latest: 2.2.1 Current version/release in rawhide: 1.10.0-6.fc39 URL: https://www.gnu.org/software/gsasl/ Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://docs.fedoraproject.org/en-US/package-maintainers/Upstream_Release_Monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1563/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/libgsasl
Scratch build failed. Details below: BuilderException: Build failed: Command '['rpmbuild', '-D', '_sourcedir .', '-D', '_topdir .', '-bs', '/var/tmp/thn-cirz7q9w/libgsasl.spec']' returned non-zero exit status 1. StdOut: setting SOURCE_DATE_EPOCH=1704153600 error: Bad file: ./libgsasl-2.2.1.tar.gz.sig: No such file or directory error: Bad file: ./libgsasl-2.2.1.tar.gz: No such file or directory RPM build errors: Bad file: ./libgsasl-2.2.1.tar.gz.sig: No such file or directory Bad file: ./libgsasl-2.2.1.tar.gz: No such file or directory Traceback: File "/usr/local/lib/python3.11/site-packages/hotness/use_cases/package_scratch_build_use_case.py", line 56, in build result = self.builder.build(request.package, request.opts) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/hotness/builders/koji.py", line 229, in build raise BuilderException( If you think this issue is caused by some bug in the-new-hotness, please report it on the-new-hotness issue tracker: https://github.com/fedora-infra/the-new-hotness/issues
Created attachment 2006853 [details] Update to 2.2.1 (#2099366)
Releases retrieved: 2.2.2, 2.2.2 Upstream release that is considered latest: 2.2.2 Current version/release in rawhide: 1.10.0-12.fc42 URL: https://www.gnu.org/software/gsasl/ Please consult the package updates policy before you issue an update to a stable branch: https://docs.fedoraproject.org/en-US/fesco/Updates_Policy/ More information about the service that created this bug can be found at: https://docs.fedoraproject.org/en-US/package-maintainers/Upstream_Release_Monitoring Please keep in mind that with any upstream change, there may also be packaging changes that need to be made. Specifically, please remember that it is your responsibility to review the new version to ensure that the licensing is still correct and that no non-free or legally problematic items have been added upstream. Based on the information from Anitya: https://release-monitoring.org/project/1563/ To change the monitoring settings for the project, please visit: https://src.fedoraproject.org/rpms/libgsasl
Scratch build failed. Details below: BuilderException: Build failed: Command '['rpmbuild', '-D', '_sourcedir .', '-D', '_topdir .', '-bs', '/var/tmp/thn-5i4rqvhg/libgsasl.spec']' returned non-zero exit status 1. StdOut: setting SOURCE_DATE_EPOCH=1743292800 error: Bad file: ./libgsasl-2.2.2.tar.gz.sig: No such file or directory error: Bad file: ./libgsasl-2.2.2.tar.gz: No such file or directory RPM build errors: Bad file: ./libgsasl-2.2.2.tar.gz.sig: No such file or directory Bad file: ./libgsasl-2.2.2.tar.gz: No such file or directory Traceback: File "/usr/local/lib/python3.12/site-packages/hotness/use_cases/package_scratch_build_use_case.py", line 56, in build result = self.builder.build(request.package, request.opts) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.12/site-packages/hotness/builders/koji.py", line 229, in build raise BuilderException( If you think this issue is caused by some bug in the-new-hotness, please report it on the-new-hotness issue tracker: https://github.com/fedora-infra/the-new-hotness/issues
Created attachment 2082709 [details] Update to 2.2.2 (#2099366)