4.10.32
===============
19:53:09  CNF SRIOV: Bond CNI. Bond-mode: Active-Active Bond modes 
19:53:09    {"Protocol":"unicast-icmp","MTU":1450,"BondMode":"balance-rr"}
19:53:09    /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/netsriovhelper/netsriovhelper.go:213
19:53:09  STEP: Validating test parameters
19:53:09  STEP: Remove all configuration from the switch interfaces [et-0/0/38 et-0/0/39 et-1/0/0 et-1/0/1]
19:53:47  STEP: Configure LAGs on a switch
19:54:14  STEP: Creating Bond interface - balance-rr
19:54:14  STEP: Defining test resources
19:54:14  STEP: Creating Server Pod
19:54:19  STEP: Creating Client Pod
19:54:28  STEP: Checking that Bond interface is configured
19:54:30  STEP: Checking traffic - unicast-icmp
19:54:35  STEP: Disabling interface on the switch and check the traffic again
19:54:53  STEP: Disabling secondary LAG slave interface et-0/0/39, bring first LAG slave interface et-0/0/38 back and check the traffic again
19:55:40  STEP: Cleaning up resources after test
19:55:40  
19:55:40  • [SLOW TEST:146.348 seconds]
19:55:40  CNF SRIOV: Bond CNI.
19:55:40  /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/tests/sriov_bond-mode.go:28
19:55:40    Bond-mode:
19:55:40    /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/tests/sriov_bond-mode.go:62
19:55:40      Active-Active Bond modes
19:55:40      /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/tests/sriov_bond-mode.go:115
19:55:40        {"Protocol":"unicast-icmp","MTU":1450,"BondMode":"balance-rr"}
19:55:40        /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/netsriovhelper/netsriovhelper.go:213
19:55:40  ------------------------------
19:55:40  CNF SRIOV: Bond CNI. Bond-mode: Active-Active Bond modes 
19:55:40    {"Protocol":"unicast-icmp","MTU":1450,"BondMode":"balance-xor"}
19:55:40    /root/workspace/CNF/test-ocp-general-cnf-core@2/cnf-gotests/test/network/sriov/netsriovhelper/netsriovhelper.go:213
19:55:40  STEP: Validating test parameters
19:55:40  STEP: Remove all configuration from the switch interfaces [et-0/0/38 et-0/0/39 et-1/0/0 et-1/0/1]
19:56:12  STEP: Configure LAGs on a switch
19:56:38  STEP: Creating Bond interface - balance-xor
19:56:38  STEP: Defining test resources
19:56:38  STEP: Creating Server Pod
19:56:42  STEP: Creating Client Pod
19:56:50  STEP: Checking that Bond interface is configured
19:56:52  STEP: Checking traffic - unicast-icmp
19:56:58  STEP: Disabling interface on the switch and check the traffic again
19:57:12  STEP: Disabling secondary LAG slave interface et-0/0/39, bring first LAG slave interface et-0/0/38 back and check the traffic again
19:58:09  STEP: Cleaning up resources after test