Note: This bug is displayed in read-only format because
the product is no longer active in Red Hat Bugzilla.
RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
Description of problem:
Boot windows 11 guest and enable netkvm verifier, then get error messages "The following command was not found: netkvm setparam 0 param=vlanid value=1" after execute this command,
Version-Release number of selected component (if applicable):
qemu-kvm-7.1.0-1.el9.x86_64
kernel-5.14.0-168.el9.x86_64
edk2-ovmf-20220526git16779ede2d36-4.el9.noarch
virtio-win-prewhql-0.1-225.iso
en-us_windows_11_business_editions_version_22h2_x64_dvd_17a08ce3.iso
How reproducible:
100%
Steps to Reproduce:
1.Boot a win11 guest
/usr/libexec/qemu-kvm \
-name 'avocado-vt-vm1' \
-sandbox on \
-blockdev node-name=file_ovmf_code,driver=file,filename=/usr/share/OVMF/OVMF_CODE.secboot.fd,auto-read-only=on,discard=unmap \
-blockdev node-name=drive_ovmf_code,driver=raw,read-only=on,file=file_ovmf_code \
-blockdev node-name=file_ovmf_vars,driver=file,filename=/root/avocado/data/avocado-vt/avocado-vt-vm1_win11-64-virtio-scsi_qcow2_filesystem_VARS.fd,auto-read-only=on,discard=unmap \
-blockdev node-name=drive_ovmf_vars,driver=raw,read-only=off,file=file_ovmf_vars \
-machine q35,memory-backend=mem-machine_mem,pflash0=drive_ovmf_code,pflash1=drive_ovmf_vars \
-device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \
-device pcie-pci-bridge,id=pcie-pci-bridge-0,addr=0x0,bus=pcie-root-port-0 \
-nodefaults \
-device VGA,bus=pcie.0,addr=0x2 \
-m 46080 \
-object memory-backend-ram,size=46080M,id=mem-machine_mem \
-smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \
-cpu 'EPYC-IBPB',x2apic=on,tsc-deadline=on,hypervisor=on,tsc-adjust=on,arch-capabilities=on,xsaves=on,cmp-legacy=on,perfctr-core=on,clzero=on,xsaveerptr=on,virt-ssbd=on,npt=on,lbrv=on,nrip-save=on,tsc-scale=on,vmcb-clean=on,svme-addr-chk=on,rdctl-no=on,skip-l1dfl-vmentry=on,mds-no=on,pschange-mc-no=on,monitor=off,hv_stimer,hv_synic,hv_vpindex,hv_relaxed,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_frequencies,hv_runtime,hv_tlbflush,hv_reenlightenment,hv_stimer_direct,hv_ipi,kvm_pv_unhalt=on \
-device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2 \
-device qemu-xhci,id=usb1,bus=pcie-root-port-1,addr=0x0 \
-device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \
-device pcie-root-port,id=pcie-root-port-2,port=0x2,addr=0x1.0x2,bus=pcie.0,chassis=3 \
-device virtio-scsi-pci,id=virtio_scsi_pci0,bus=pcie-root-port-2,addr=0x0 \
-blockdev node-name=file_image1,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/root/avocado/data/avocado-vt/vl_avocado-vt-vm1_image1.qcow2,cache.direct=on,cache.no-flush=off \
-blockdev node-name=drive_image1,driver=qcow2,read-only=off,cache.direct=on,cache.no-flush=off,file=file_image1 \
-device scsi-hd,id=image1,drive=drive_image1,write-cache=on \
-device pcie-root-port,id=pcie-root-port-3,port=0x3,addr=0x1.0x3,bus=pcie.0,chassis=4 \
-device virtio-net-pci,mac=9a:e6:a2:8c:68:f1,id=idwWP7sa,netdev=idHXPxxs,bus=pcie-root-port-3,addr=0x0 \
-netdev tap,id=idHXPxxs,vhost=on \
-blockdev node-name=file_cd1,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/home/kvm_autotest_root/iso/windows/winutils.iso,cache.direct=on,cache.no-flush=off \
-blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \
-device scsi-cd,id=cd1,drive=drive_cd1,write-cache=on \
-blockdev node-name=file_virtio,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/home/kvm_autotest_root/iso/windows/virtio-win-prewhql-0.1-225.iso,cache.direct=on,cache.no-flush=off \
-blockdev node-name=drive_virtio,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_virtio \
-device scsi-cd,id=virtio,drive=drive_virtio,write-cache=on \
-vnc :0 \
-rtc base=localtime,clock=host,driftfix=slew \
-boot menu=off,order=cdn,once=c,strict=off \
-enable-kvm \
-device pcie-root-port,id=pcie_extra_root_port_0,multifunction=on,bus=pcie.0,addr=0x3,chassis=5 \
-monitor stdio \
2.Check netkvm driver state.
wmic> sysdriver where PathName="C:\\Windows\\System32\\drivers\\netkvm.sys" get State /value
3.Check netkvm driver verifier status
verifier /querysettings
4.Ensure netkvm verifier is enabled already,then setup a vlan tag for network interface: Ethernet Instance 0
> netsh netkvm setparam 0 param=vlanid value=1
The following command was not found: netkvm setparam 0 param=vlanid value=1
Actual results:
command failed
Expected results:
it should be set pass
Additional info:
1. Under the same env, windows 2019 test pass. From QE side this seems a windows 11 iso issue.
2. Used the same env to test windows-11-21h2 also hit same issue.
3. In the past it test pass on rhel.9.1.0 with windows-11-21h2,so add keywords "Regression".
Test Version:
qemu-kvm-7.0.0-1.el9.x86_64
kernel-5.14.0-79.el9.x86_64
edk2-ovmf-20220221gitb24306f15d-1.el9.noarch
virtio-win-prewhql-0.1-215.iso
Additioanl info:
Hit same issue with windows 2019 guest, but the reproduced rate is very low(About 1/6)
Test Version:
kernel-5.14.0-169.el9.x86_64
qemu-kvm-7.1.0-1.el9.x86_64
edk2-ovmf-20220526git16779ede2d36-4.el9.noarch
virtio-win-prewhql-0.1-225.iso
Hit same issue with command: netsh netkvm setparam 0 param=*LsoV2IPv4 value=0
error info: the following command was not found: netkvm setparam 0 param=*LsoV2IPv4 value=0.
Test Version:
kernel-5.14.0-174.el9.x86_64
qemu-kvm-7.1.0-2.el9.x86_64
edk2-ovmf-20220526git16779ede2d36-4.el9.noarch
virtio-win-prewhql-0.1-227.iso
Also hit this problem on the rhel.8.8 host with virtual netwotk function testing.
Test Version:
qemu-kvm-6.2.0-22.module+el8.8.0+16816+1d3555ec.x86_64
kernel-4.18.0-430.el8.x86_64
virtio-win-prewhql-0.1-227.iso
edk2-ovmf-20220126gitbb1bba3d77-3.el8.noarch
Guest:
en-us_windows_11_business_editions_version_22h2_x64_dvd_17a08ce3.iso
Comment 4Yvugenfi@redhat.com
2022-11-08 10:29:28 UTC
Sorry, I don't see in the steps the registration of the netsh plugin.
"rundll32 netkvmco.dll,RegisterNetKVMNetShHelper"
(In reply to Yvugenfi from comment #4)
> Sorry, I don't see in the steps the registration of the netsh plugin.
>
> "rundll32 netkvmco.dll,RegisterNetKVMNetShHelper"
Hello Yan
I tried to add this step to the test and the problem was reproduced again.
Test Steps:
1. Boot a guest
2. Check netkvm driver state
wmic> sysdriver where PathName="C:\\Windows\\System32\\drivers\\netkvm.sys" get State /value
3.Check netkvm driver verifier status
> verifier /querysettings
4.Copy and register netkvmco.dll
> xcopy E:\NetKVM\w11\amd64\netkvmco.dll c:\\ /y && rundll32 netkvmco.dll,RegisterNetKVMNetShHelper
5.setup a vlan tag for network interface: Ethernet Instance 0
> netsh netkvm setparam 0 param=vlanid value=900
The following command was not found: netkvm setparam 0 param=vlanid value=900.
Thanks
Lei
Hit same issue
Test Version:
kernel-5.14.0-224.el9.x86_64
qemu-kvm-7.2.0-2.el9.x86_64
edk2-ovmf-20220826gitba0e0e4c6a-2.el9.noarch
virtio-win-prewhql-0.1-231.iso
Guest:
Windows_11_x64_testsigned_enabled_dvd-22h2.iso
Hit same issues
Test Version:
kernel-5.14.0-304.el9.x86_64
qemu-kvm-8.0.0-1.el9.x86_64
edk2-ovmf-20230301gitf80f052277c8-2.el9.noarch
virtio-win-prewhql-0.1-236.iso
Still hit this issue on virtio-win-prewhql-0.1-236.
kernel-5.14.0-284.11.1.el9_2.x86_64
qemu-kvm-7.2.0-14.el9_2.x86_64
seabios-bin-1.16.1-1.el9.noarch
edk2-ovmf-20221207gitfff6d81270b5-9.el9_2.noarch
virtiofsd-1.5.0-1.el9.x86_64
I changed the location after netkvmco to "rundll32 c:\\netkvmco.dll,RegisterNetKVMNetShHelper" instead of the previous "rundll32 netkvmco.dll,RegisterNetKVMNetShHelper". I think the root cause of this problem is that netkvmco.dll is not found.
According to my check the netkvmco.dll does not function on win11 22H2, due to the fact that in 22h2 WDK the interface of NETSH was changed.
We can hope that netkvmco.dll will continue working on Win10 and earlier.
Description of problem: Boot windows 11 guest and enable netkvm verifier, then get error messages "The following command was not found: netkvm setparam 0 param=vlanid value=1" after execute this command, Version-Release number of selected component (if applicable): qemu-kvm-7.1.0-1.el9.x86_64 kernel-5.14.0-168.el9.x86_64 edk2-ovmf-20220526git16779ede2d36-4.el9.noarch virtio-win-prewhql-0.1-225.iso en-us_windows_11_business_editions_version_22h2_x64_dvd_17a08ce3.iso How reproducible: 100% Steps to Reproduce: 1.Boot a win11 guest /usr/libexec/qemu-kvm \ -name 'avocado-vt-vm1' \ -sandbox on \ -blockdev node-name=file_ovmf_code,driver=file,filename=/usr/share/OVMF/OVMF_CODE.secboot.fd,auto-read-only=on,discard=unmap \ -blockdev node-name=drive_ovmf_code,driver=raw,read-only=on,file=file_ovmf_code \ -blockdev node-name=file_ovmf_vars,driver=file,filename=/root/avocado/data/avocado-vt/avocado-vt-vm1_win11-64-virtio-scsi_qcow2_filesystem_VARS.fd,auto-read-only=on,discard=unmap \ -blockdev node-name=drive_ovmf_vars,driver=raw,read-only=off,file=file_ovmf_vars \ -machine q35,memory-backend=mem-machine_mem,pflash0=drive_ovmf_code,pflash1=drive_ovmf_vars \ -device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \ -device pcie-pci-bridge,id=pcie-pci-bridge-0,addr=0x0,bus=pcie-root-port-0 \ -nodefaults \ -device VGA,bus=pcie.0,addr=0x2 \ -m 46080 \ -object memory-backend-ram,size=46080M,id=mem-machine_mem \ -smp 16,maxcpus=16,cores=8,threads=1,dies=1,sockets=2 \ -cpu 'EPYC-IBPB',x2apic=on,tsc-deadline=on,hypervisor=on,tsc-adjust=on,arch-capabilities=on,xsaves=on,cmp-legacy=on,perfctr-core=on,clzero=on,xsaveerptr=on,virt-ssbd=on,npt=on,lbrv=on,nrip-save=on,tsc-scale=on,vmcb-clean=on,svme-addr-chk=on,rdctl-no=on,skip-l1dfl-vmentry=on,mds-no=on,pschange-mc-no=on,monitor=off,hv_stimer,hv_synic,hv_vpindex,hv_relaxed,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_frequencies,hv_runtime,hv_tlbflush,hv_reenlightenment,hv_stimer_direct,hv_ipi,kvm_pv_unhalt=on \ -device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2 \ -device qemu-xhci,id=usb1,bus=pcie-root-port-1,addr=0x0 \ -device usb-tablet,id=usb-tablet1,bus=usb1.0,port=1 \ -device pcie-root-port,id=pcie-root-port-2,port=0x2,addr=0x1.0x2,bus=pcie.0,chassis=3 \ -device virtio-scsi-pci,id=virtio_scsi_pci0,bus=pcie-root-port-2,addr=0x0 \ -blockdev node-name=file_image1,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/root/avocado/data/avocado-vt/vl_avocado-vt-vm1_image1.qcow2,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_image1,driver=qcow2,read-only=off,cache.direct=on,cache.no-flush=off,file=file_image1 \ -device scsi-hd,id=image1,drive=drive_image1,write-cache=on \ -device pcie-root-port,id=pcie-root-port-3,port=0x3,addr=0x1.0x3,bus=pcie.0,chassis=4 \ -device virtio-net-pci,mac=9a:e6:a2:8c:68:f1,id=idwWP7sa,netdev=idHXPxxs,bus=pcie-root-port-3,addr=0x0 \ -netdev tap,id=idHXPxxs,vhost=on \ -blockdev node-name=file_cd1,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/home/kvm_autotest_root/iso/windows/winutils.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_cd1,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_cd1 \ -device scsi-cd,id=cd1,drive=drive_cd1,write-cache=on \ -blockdev node-name=file_virtio,driver=file,auto-read-only=on,discard=unmap,aio=threads,filename=/home/kvm_autotest_root/iso/windows/virtio-win-prewhql-0.1-225.iso,cache.direct=on,cache.no-flush=off \ -blockdev node-name=drive_virtio,driver=raw,read-only=on,cache.direct=on,cache.no-flush=off,file=file_virtio \ -device scsi-cd,id=virtio,drive=drive_virtio,write-cache=on \ -vnc :0 \ -rtc base=localtime,clock=host,driftfix=slew \ -boot menu=off,order=cdn,once=c,strict=off \ -enable-kvm \ -device pcie-root-port,id=pcie_extra_root_port_0,multifunction=on,bus=pcie.0,addr=0x3,chassis=5 \ -monitor stdio \ 2.Check netkvm driver state. wmic> sysdriver where PathName="C:\\Windows\\System32\\drivers\\netkvm.sys" get State /value 3.Check netkvm driver verifier status verifier /querysettings 4.Ensure netkvm verifier is enabled already,then setup a vlan tag for network interface: Ethernet Instance 0 > netsh netkvm setparam 0 param=vlanid value=1 The following command was not found: netkvm setparam 0 param=vlanid value=1 Actual results: command failed Expected results: it should be set pass Additional info: 1. Under the same env, windows 2019 test pass. From QE side this seems a windows 11 iso issue. 2. Used the same env to test windows-11-21h2 also hit same issue. 3. In the past it test pass on rhel.9.1.0 with windows-11-21h2,so add keywords "Regression". Test Version: qemu-kvm-7.0.0-1.el9.x86_64 kernel-5.14.0-79.el9.x86_64 edk2-ovmf-20220221gitb24306f15d-1.el9.noarch virtio-win-prewhql-0.1-215.iso