Red Hat Bugzilla – Bug 224298
shutdown does not work properly
Last modified: 2008-01-30 06:18:11 EST
Description of problem: my assumption is that when /sbin/shutdown is called from
upsmon, that the shutdown should proceed as if "/sbin/shutdown -h +0" was called
directly from the command line, with that the exception that upsdrvctl is used
to advise the UPS to shutdown. it doesnt. the pc shuts down MOST services, and
then goes to a blank screen with no proper power off of the PC or the UPS, and
file systems are left unclean. it appears as if /etc/rc.d/rc0.d/S01halt does not
complete properly, if called at all. I have tried to trace this without joy.
This happens whether I use the upsdrvctl program, or the fentoups driver called
directly. I have put some traces in
/etc/rc.d/rc0.d/S01halt .. the traces never get reached, so I am sure that the
UPS section of S01halt is not being executed.
Version-Release number of selected component (if applicable):
Steps to Reproduce:
clean shutdown with powerdown of PC and ups
This should be fixed in the recent versions -- the initscripts should have been
updated some time ago. I'll try to verify that somehow.
It should be fixed now. Feel free to reopen if you find any problems.