When I start my laptop for the first time, I see a black screen on plymouth's LUKS password screen. I can blindly type the password and get the loading screen to show for plymouth and then my user login screen. If I restart, I see the luks password screen just fine. 
I do have an NVIDIA Optimus graphics laptop, but I have uninstalled the NVIDIA driver and disabled nouveau to only depend on i915 and no luck.


alex@razerblade15:~$ sudo journalctl -b 0 | grep -ie "drm\|i915\|plymouth" | grep 15:
Oct 16 15:07:40 razerblade15 kernel: ACPI: bus type drm_connector registered
Oct 16 15:07:40 razerblade15 kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
Oct 16 15:07:40 razerblade15 kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
Oct 16 15:07:40 razerblade15 kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
Oct 16 15:07:41 razerblade15 systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
Oct 16 15:07:41 razerblade15 systemd[1]: Received SIGRTMIN+20 from PID 538 (plymouthd).
Oct 16 15:07:41 razerblade15 systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
Oct 16 15:07:41 razerblade15 systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
Oct 16 15:07:41 razerblade15 systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
Oct 16 15:07:41 razerblade15 systemd[1]: Started systemd-ask-password-plymouth.service - Forward Password Requests to Plymouth.
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] Found alderlake_p (device ID 46a6) integrated display version 13.00 stepping D0
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] VT-d active for gfx access
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] Using Transparent Hugepages
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.49.4
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] Skipping intel_backlight registration
Oct 16 15:07:42 razerblade15 kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
Oct 16 15:07:42 razerblade15 kernel: fbcon: i915drmfb (fb0) is primary device
Oct 16 15:07:42 razerblade15 kernel: i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Oct 16 15:07:50 razerblade15 systemd[1]: Starting plymouth-switch-root.service - Plymouth switch root service...
Oct 16 15:07:50 razerblade15 systemd[1]: Finished plymouth-switch-root.service - Plymouth switch root service.


Graphics:
  Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Razer USA
    driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: none
    bus-ID: 00:02.0 chip-ID: 8086:46a6 class-ID: 0300
  Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q]
    vendor: Razer USA driver: N/A arch: Ampere pcie: speed: 16 GT/s lanes: 8
    bus-ID: 01:00.0 chip-ID: 10de:2560 class-ID: 0300
  Device-3: IMC Networks Integrated RGB Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 1-2:2 chip-ID: 13d3:5279
    class-ID: 0e02 serial: 01.00.00
  Display: unspecified server: X.Org v: 24.1.8 with: Xwayland v: 24.1.8
    compositor: gnome-shell v: 48.5 driver: dri: iris gpu: i915 display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 4096x2304 s-dpi: 96 s-size: 1084x610mm (42.68x24.02")
    s-diag: 1244mm (48.97")
  Monitor-1: eDP-1 model: Sharp LQ156T1JW03 res: mode: 4096x2304 hz: 240
    scale: 100% (1) dpi: 306 size: 340x190mm (13.39x7.48") diag: 395mm (15.5")
    modes: 2560x1440
  API: OpenGL v: 4.6 vendor: intel mesa v: 25.1.9 glx-v: 1.4 es-v: 3.2
    direct-render: yes renderer: Mesa Intel Iris Xe Graphics (ADL GT2)
    device-ID: 8086:46a6
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
  Info: Tools: api: glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr




Reproducible: Always

Steps to Reproduce:
1. Shut down Laptop
2. Start PC
3. Wait til LUKS prompt
Actual Results:
Black screen at LUKS prompt

Expected Results:
I should see the LUKS prompt