Bug 2576845 (CVE-2026-99547) - CVE-2026-99547 kernel: kernel: Denial of Service via Thunderbolt device unplug on multi-domain systems
Summary: CVE-2026-99547 kernel: kernel: Denial of Service via Thunderbolt device unplu...
Keywords:
Status: NEW
Alias: CVE-2026-99547
Product: Security Response
Classification: Other
Component: vulnerability
Version: unspecified
Hardware: All
OS: Linux
medium
medium
Target Milestone: ---
Assignee: Product Security DevOps Team
QA Contact:
URL:
Whiteboard:
Depends On:
Blocks:
TreeView+ depends on / blocked
 
Reported: 2026-11-19 15:35 UTC by OSIDB Bzimport
Modified: 2026-11-19 19:13 UTC (History)
17 users (show)

Fixed In Version:
Clone Of:
Environment:
Last Closed:
Embargoed:


Attachments (Terms of Use)

Description OSIDB Bzimport 2026-11-19 15:35:52 UTC
In the Linux kernel, the following vulnerability has been resolved:

thunderbolt: Do not RPM complete unrelated subtrees on unplug

When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).

I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.

Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:

```
RESCAN_ENTER domain=0

COMPLETE rescan_domain=0 target=0-1 target_domain=0
         route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD

BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1

COMPLETE rescan_domain=0 target=1-0 target_domain=1
         route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0

        complete+5
        complete_rpm+43
        bus_for_each_dev+133
        icm_free_unplugged_children+250
        icm_rescan_work+42
```

This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.

I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case.


Note You need to log in before you can comment on or make changes to this bug.