Created attachment 336637 [details] See crash analysis in attached log crash 4.0-7 Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008 Red Hat, Inc. Copyright (C) 2004, 2005, 2006 IBM Corporation Copyright (C) 1999-2006 Hewlett-Packard Co Copyright (C) 2005, 2006 Fujitsu Limited Copyright (C) 2006, 2007 VA Linux Systems Japan K.K. Copyright (C) 2005 NEC Corporation Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc. Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc. This program is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Enter "help copying" to see the conditions. This program has absolutely no warranty. Enter "help warranty" for details. [?1034hGNU gdb 6.1 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i686-pc-linux-gnu"... please wait... (gathering kmem slab cache data) please wait... (gathering module symbol data) please wait... (gathering task table data) please wait... (determining panic task) KERNEL: /usr/lib/debug/lib/modules/2.6.27.19-170.2.35.fc10.i686/vmlinux DUMPFILE: ./vmcore CPUS: 2 DATE: Thu Mar 19 09:22:02 2009 UPTIME: 01:55:57 LOAD AVERAGE: 0.04, 0.01, 0.07 TASKS: 240 NODENAME: mharveyf10 RELEASE: 2.6.27.19-170.2.35.fc10.i686 VERSION: #1 SMP Mon Feb 23 13:21:22 EST 2009 MACHINE: i686 (2194 Mhz) MEMORY: 2 GB PANIC: "Oops: 0000 [#1] SMP " (check log for details) PID: 2103 COMMAND: "rsyslogd" TASK: f4862670 [THREAD_INFO: f49cb000] CPU: 1 STATE: TASK_RUNNING (PANIC) crash> log Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.19-170.2.35.fc10.i686 (mockbuild.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Feb 23 13:21:22 EST 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e6b0000 (usable) BIOS-e820: 000000007e6b0000 - 000000007e6cc000 (ACPI data) BIOS-e820: 000000007e6cc000 - 000000007e700000 (ACPI NVS) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7e6b0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 37c6a000 - 37fefdbe ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) ACPI: XSDT 7E6BB77F, 0094 (r1 LENOVO TP-7L 2210 LTP 0) ACPI: FACP 7E6BB900, 00F4 (r3 LENOVO TP-7L 2210 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609] ACPI: DSDT 7E6BBD1D, FED1 (r1 LENOVO TP-7L 2210 MSFT 3000000) ACPI: FACS 7E6E4000, 0040 ACPI: SSDT 7E6BBAB4, 0269 (r1 LENOVO TP-7L 2210 MSFT 3000000) ACPI: ECDT 7E6CBBEE, 0052 (r1 LENOVO TP-7L 2210 LNVO 1) ACPI: TCPA 7E6CBC40, 0032 (r2 LENOVO TP-7L 2210 LNVO 1) ACPI: APIC 7E6CBC72, 0068 (r1 LENOVO TP-7L 2210 LNVO 1) ACPI: MCFG 7E6CBCDA, 003C (r1 LENOVO TP-7L 2210 LNVO 1) ACPI: HPET 7E6CBD16, 0038 (r1 LENOVO TP-7L 2210 LNVO 1) ACPI: SLIC 7E6CBDF0, 0176 (r1 LENOVO TP-7L 2210 LTP 0) ACPI: BOOT 7E6CBF66, 0028 (r1 LENOVO TP-7L 2210 LTP 1) ACPI: ASF! 7E6CBF8E, 0072 (r16 LENOVO TP-7L 2210 PTL 1) ACPI: SSDT 7E6E26D9, 025F (r1 LENOVO TP-7L 2210 INTL 20050513) ACPI: SSDT 7E6E2938, 00A6 (r1 LENOVO TP-7L 2210 INTL 20050513) ACPI: SSDT 7E6E29DE, 04F7 (r1 LENOVO TP-7L 2210 INTL 20050513) ACPI: SSDT 7E6E2ED5, 01D8 (r1 LENOVO TP-7L 2210 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) 1126MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097612c] TEXT DATA BSS ==> [0000400000 - 000097612c] #4 [0037c6a000 - 0037fefdbe] RAMDISK ==> [0037c6a000 - 0037fefdbe] #5 [0000977000 - 000097b000] INIT_PG_TABLE ==> [0000977000 - 000097b000] #6 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f6900] 000f6900 Reserving 128MB of memory at 16MB for crashkernel (System RAM: 2022MB) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007e6b0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0007e6b0 On node 0 totalpages: 517709 free_area_init_node: node 0, pgdat c07f6b00, node_mem_map c9000000 DMA zone: 3965 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 286178 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513663 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet crashkernel=128M@16M Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c08a3000 soft=c0883000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2194.450 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1912472k/2071232k available (2746k kernel code, 157496k reserved, 1423k data, 416k init, 1153728k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0818000 - 0xc0880000 ( 416 kB) .data : 0xc06ae93e - 0xc0812618 (1423 kB) .text : 0xc0400000 - 0xc06ae93e (2746 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.90 BogoMIPS (lpj=2194450) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b CPU 1 irqstacks, hard=c08a4000 soft=c0884000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194390) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: Measured 1207800 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8777.68 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3268 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 11:26:06 Date: 03/19/09 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 64bit mmio: [f8100000, f81fffff] PCI: 0000:00:02.0 reg 18 64bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 20 io port: [1800, 1807] PCI: 0000:00:02.1 reg 10 64bit mmio: [f8200000, f82fffff] PCI: 0000:00:19.0 reg 10 32bit mmio: [fe000000, fe01ffff] PCI: 0000:00:19.0 reg 14 32bit mmio: [fe025000, fe025fff] PCI: 0000:00:19.0 reg 18 io port: [1840, 185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [1860, 187f] PCI: 0000:00:1a.1 reg 20 io port: [1880, 189f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fe226c00, fe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe020000, fe023fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [18a0, 18bf] PCI: 0000:00:1d.1 reg 20 io port: [18c0, 18df] PCI: 0000:00:1d.2 reg 20 io port: [18e0, 18ff] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe227000, fe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1c00, 1c0f] PCI: 0000:00:1f.2 reg 10 io port: [1c50, 1c57] PCI: 0000:00:1f.2 reg 14 io port: [1c44, 1c47] PCI: 0000:00:1f.2 reg 18 io port: [1c48, 1c4f] PCI: 0000:00:1f.2 reg 1c io port: [1c40, 1c43] PCI: 0000:00:1f.2 reg 20 io port: [1c20, 1c3f] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fe226000, fe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 32bit mmio: [fe227400, fe2274ff] PCI: 0000:00:1f.3 reg 20 io port: [1c60, 1c7f] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [fc000000, fdffffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8000000, f80fffff] PCI: 0000:03:00.0 reg 10 32bit mmio: [df3ff000, df3fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.1 io port: [3000, 3fff] PCI: bridge 0000:00:1c.1 32bit mmio: [dc000000, df3fffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [dfe00000, dfefffff] PCI: bridge 0000:00:1c.2 io port: [4000, 4fff] PCI: bridge 0000:00:1c.2 32bit mmio: [d8000000, d9ffffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [dfb00000, dfbfffff] PCI: bridge 0000:00:1c.3 io port: [5000, 5fff] PCI: bridge 0000:00:1c.3 32bit mmio: [d4000000, d5ffffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [df800000, df8fffff] PCI: bridge 0000:00:1c.4 io port: [6000, 6fff] PCI: bridge 0000:00:1c.4 32bit mmio: [d0000000, d1ffffff] PCI: bridge 0000:00:1c.4 64bit mmio pref: [df500000, df5fffff] PCI: 0000:15:00.0 reg 10 32bit mmio: [f8300000, f8300fff] pci 0000:15:00.0: supports D1 pci 0000:15:00.0: supports D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled PCI: 0000:15:00.1 reg 10 32bit mmio: [f8301000, f83017ff] pci 0000:15:00.1: supports D1 pci 0000:15:00.1: supports D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: PME# disabled PCI: 0000:15:00.2 reg 10 32bit mmio: [f8301800, f83018ff] pci 0000:15:00.2: supports D1 pci 0000:15:00.2: supports D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: PME# disabled PCI: 0000:15:00.3 reg 10 32bit mmio: [f8301c00, f8301cff] pci 0000:15:00.3: supports D1 pci 0000:15:00.3: supports D2 pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.3: PME# disabled PCI: 0000:15:00.4 reg 10 32bit mmio: [f8302000, f83020ff] pci 0000:15:00.4: supports D1 pci 0000:15:00.4: supports D2 pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.4: PME# disabled PCI: 0000:15:00.5 reg 10 32bit mmio: [f8302400, f83024ff] pci 0000:15:00.5: supports D1 pci 0000:15:00.5: supports D2 pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.5: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [7000, afff] PCI: bridge 0000:00:1e.0 32bit mmio: [f8300000, fbffffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [f4000000, f7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 Switched to high resolution mode on CPU 0 ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7effffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x6000-0x6fff pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x007000-0x0070ff pci 0000:15:00.0: IO window: 0x007400-0x0074ff pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x7000-0xafff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [fc000000, fdffffff] bus: 02 index 2 mmio: [f8000000, f80fffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [3000, 3fff] bus: 03 index 1 mmio: [dc000000, df3fffff] bus: 03 index 2 mmio: [dfe00000, dfefffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [4000, 4fff] bus: 04 index 1 mmio: [d8000000, d9ffffff] bus: 04 index 2 mmio: [dfb00000, dfbfffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 io port: [5000, 5fff] bus: 05 index 1 mmio: [d4000000, d5ffffff] bus: 05 index 2 mmio: [df800000, df8fffff] bus: 05 index 3 mmio: [0, 0] bus: 0d index 0 io port: [6000, 6fff] bus: 0d index 1 mmio: [d0000000, d1ffffff] bus: 0d index 2 mmio: [df500000, df5fffff] bus: 0d index 3 mmio: [0, 0] bus: 15 index 0 io port: [7000, afff] bus: 15 index 1 mmio: [f8300000, fbffffff] bus: 15 index 2 mmio: [f4000000, f7ffffff] bus: 15 index 3 io port: [0, ffff] bus: 15 index 4 mmio: [0, ffffffffffffffff] bus: 16 index 0 io port: [7000, 70ff] bus: 16 index 1 io port: [7400, 74ff] bus: 16 index 2 mmio: [f4000000, f7ffffff] bus: 16 index 3 mmio: [80000000, 83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3607k freed Simple Boot Flag at 0x35 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1237461965.448:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1490 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 7E6E1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 7E6E1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7E6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 7E6E1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (65 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (66 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16 ata2: DUMMY ata3: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33 ata4.00: configured for UDMA/33 ata5: port disabled. ignoring. scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 4 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-4: New USB device found, idVendor=04b3, idProduct=4485 usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: BCM2045B usb 3-1: Manufacturer: Broadcom Corp usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.i686 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel cpuidle: using governor ladder cpuidle: using governor menu usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=0483, idProduct=2016 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Biometric Coprocessor usb 3-2: Manufacturer: STMicroelectronics usb 1-4.3: new low speed USB device using ehci_hcd and address 5 usb 1-4.3: configuration #1 chosen from 1 choice usb 1-4.3: New USB device found, idVendor=046d, idProduct=c517 usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4.3: Product: USB Receiver usb 1-4.3: Manufacturer: Logitech usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input5 input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-4.3 Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.1/input/input6 input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-4.3 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 1:947:428 Freeing unused kernel memory: 416k freed Write protecting the kernel text: 2748k Write protecting the kernel read-only data: 1176k Clocksource tsc unstable (delta = -196342651 ns) Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: 8192 avtab hash slots, 114634 rules. SELinux: 8192 avtab hash slots, 114634 rules. SELinux: 8 users, 11 roles, 2676 types, 121 bools, 1 sens, 1024 cats SELinux: 73 classes, 114634 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1237461970.472:2): policy loaded auid=4294967295 ses=4294967295 psmouse serio2: ID: 10 00 64<6>udevd version 127 started ACPI: WMI: Mapper loaded iTCO_vendor_support: vendor-support=0 input: PC Speaker as /devices/platform/pcspkr/input/input8 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input9 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) acpi device:08: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input10 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: setting latency timer to 64 Registered led device: mmc0 mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] IBM TrackPoint firmware: 0x0e, buttons: 3/3 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff cs: IO port probe 0x7000-0xafff: clean. pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2008 Intel Corporation thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETC1WW (2.21 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61, model 6464Y1E thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /devices/virtual/input/input12 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:e2:18:05:13 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1008ff-0ff i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:03:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10 iwl3945 0000:03:00.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 firewire_core: created device fw0: GUID 00016c00006b5d8c, S400 ALSA sound/pci/hda/hda_intel.c:609: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x012f000c device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 4095992k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:4095992k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a <tigran.co.uk> firmware: requesting intel-ucode/06-0f-0b firmware: requesting intel-ucode/06-0f-0b NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 ADDRCONF(NETDEV_UP): eth0: link is not ready iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) firmware: requesting iwlwifi-3945-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 eth0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 fuse init (API version 7.9) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:1d:45:ce:31:c0 wlan0: authenticated wlan0: associate with AP 00:1d:45:ce:31:c0 wlan0: RX AssocResp from 00:1d:45:ce:31:c0 (capab=0x431 status=0 aid=74) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present npviewer.bin[6127]: segfault at 0 ip 0051f4a0 sp b0b5bf30 error 4 in libc-2.9.so[4a7000+16e000] CE: hpet increasing min_delta_ns to 15000 nsec BUG: sleeping function called from invalid context at kernel/mutex.c:88 in_atomic():1, irqs_disabled():0 Pid: 0, comm: swapper Not tainted 2.6.27.19-170.2.35.fc10.i686 #1 [<c0427ecd>] __might_sleep+0xc6/0xcb [<c06a9d97>] mutex_lock+0x18/0x2d [<f8a9bd9a>] iwl3945_mac_conf_tx+0x19e/0x20c [iwl3945] [<f8a3a615>] ieee80211_sta_wmm_params+0x175/0x1a4 [mac80211] [<f8a3c4fe>] ieee80211_rx_mgmt_beacon+0xe8/0x1de [mac80211] [<c062e288>] ? __kfree_skb+0x63/0x66 [<f8a3c653>] ieee80211_sta_rx_scan+0x5f/0x78 [mac80211] [<f8a43087>] ieee80211_invoke_rx_handlers+0x4d/0x1475 [mac80211] [<c04242e6>] ? enqueue_entity+0x203/0x20b [<c06aad4b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c0431f50>] ? __tasklet_schedule+0x66/0x7d [<f8a42b02>] ? ieee80211_rx_irqsafe+0x4d/0x52 [mac80211] [<f8aa4201>] ? iwl3945_pass_packet_to_mac80211+0x272/0x284 [iwl3945] [<f8aa4a25>] ? iwl3945_rx_reply_rx+0x812/0x81a [iwl3945] [<f8a4496b>] __ieee80211_rx_handle_packet+0x4bc/0x4ce [mac80211] [<f8a44fdc>] __ieee80211_rx+0x464/0x4b4 [mac80211] [<f8a36c88>] ieee80211_tasklet_handler+0x62/0xda [mac80211] [<c0432129>] tasklet_action+0x7f/0xea [<c0432757>] __do_softirq+0x84/0x109 [<c04326d3>] ? __do_softirq+0x0/0x109 [<c0406f1c>] do_softirq+0x77/0xdb [<c046626f>] ? handle_fasteoi_irq+0x0/0xc0 [<c04323be>] irq_exit+0x44/0x83 [<c0406e8e>] do_IRQ+0xe7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c0567b2e>] ? acpi_idle_enter_bm+0x27d/0x2cc [<c061778a>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c06a694a>] start_secondary+0x197/0x19f ======================= BUG: scheduling while atomic: swapper/0/0x00000100 Modules linked in: fuse i915 drm rfcomm sco bridge stp bnep l2cap sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq dm_multipath uinput snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq arc4 snd_seq_device ecb crypto_blkcipher snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep thinkpad_acpi iwl3945 snd firewire_ohci firewire_core btusb e1000e i2c_i801 soundcore mac80211 i2c_core yenta_socket rsrc_nonstatic sdhci_pci ricoh_mmc sdhci rfkill video mmc_core iTCO_wdt bluetooth pcspkr iTCO_vendor_support cfg80211 hwmon output crc_itu_t joydev wmi [last unloaded: microcode] Pid: 0, comm: swapper Not tainted (2.6.27.19-170.2.35.fc10.i686 #1) 6464Y1E EIP: 0060:[<c0567b2e>] EFLAGS: 00000246 CPU: 1 EIP is at acpi_idle_enter_bm+0x27d/0x2cc EAX: c087b670 EBX: 000071fa ECX: c9fed180 EDX: 0976e000 ESI: 00000000 EDI: 002335c1 EBP: f7849f7c ESP: f7849f60 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7f2b000 CR3: 00880000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c061778a>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c06a694a>] start_secondary+0x197/0x19f ======================= bad: scheduling from the idle thread! Pid: 0, comm: swapper Not tainted 2.6.27.19-170.2.35.fc10.i686 #1 [<c06a8ee1>] ? printk+0xf/0x16 [<c0422126>] dequeue_task_idle+0x2a/0x37 [<c04203fa>] dequeue_task+0x106/0x118 [<c0420444>] deactivate_task+0x19/0x1f [<c06a91bc>] schedule+0x183/0x70d [<c057df68>] ? vt_console_print+0x0/0x25c [<c06aae64>] ? _spin_lock_irqsave+0x29/0x30 [<c0436adf>] ? __mod_timer+0x9d/0xa8 [<c06a9ab9>] schedule_timeout+0x9d/0xbc [<c04365f9>] ? process_timeout+0x0/0xa [<c0436a55>] ? __mod_timer+0x13/0xa8 [<f8a9b129>] iwl3945_send_cmd_sync+0x12e/0x2b9 [iwl3945] [<c043ef62>] ? autoremove_wake_function+0x0/0x33 [<f8a9b86d>] iwl3945_send_cmd_pdu+0x3a/0x42 [iwl3945] [<f8a9bbf3>] iwl3945_activate_qos+0xd9/0xe2 [iwl3945] [<f8a9bdc4>] iwl3945_mac_conf_tx+0x1c8/0x20c [iwl3945] [<f8a3a615>] ieee80211_sta_wmm_params+0x175/0x1a4 [mac80211] [<f8a3c4fe>] ieee80211_rx_mgmt_beacon+0xe8/0x1de [mac80211] [<c062e288>] ? __kfree_skb+0x63/0x66 [<f8a3c653>] ieee80211_sta_rx_scan+0x5f/0x78 [mac80211] [<f8a43087>] ieee80211_invoke_rx_handlers+0x4d/0x1475 [mac80211] [<c04242e6>] ? enqueue_entity+0x203/0x20b [<c06aad4b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c0431f50>] ? __tasklet_schedule+0x66/0x7d [<f8a42b02>] ? ieee80211_rx_irqsafe+0x4d/0x52 [mac80211] [<f8aa4201>] ? iwl3945_pass_packet_to_mac80211+0x272/0x284 [iwl3945] [<f8aa4a25>] ? iwl3945_rx_reply_rx+0x812/0x81a [iwl3945] [<f8a4496b>] __ieee80211_rx_handle_packet+0x4bc/0x4ce [mac80211] [<f8a44fdc>] __ieee80211_rx+0x464/0x4b4 [mac80211] [<f8a36c88>] ieee80211_tasklet_handler+0x62/0xda [mac80211] [<c0432129>] tasklet_action+0x7f/0xea [<c0432757>] __do_softirq+0x84/0x109 [<c04326d3>] ? __do_softirq+0x0/0x109 [<c0406f1c>] do_softirq+0x77/0xdb [<c046626f>] ? handle_fasteoi_irq+0x0/0xc0 [<c04323be>] irq_exit+0x44/0x83 [<c0406e8e>] do_IRQ+0xe7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c0567b2e>] ? acpi_idle_enter_bm+0x27d/0x2cc [<c061778a>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c06a694a>] start_secondary+0x197/0x19f ======================= BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 7dd37067 Oops: 0000 [#1] SMP Modules linked in: fuse i915 drm rfcomm sco bridge stp bnep l2cap sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq dm_multipath uinput snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq arc4 snd_seq_device ecb crypto_blkcipher snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep thinkpad_acpi iwl3945 snd firewire_ohci firewire_core btusb e1000e i2c_i801 soundcore mac80211 i2c_core yenta_socket rsrc_nonstatic sdhci_pci ricoh_mmc sdhci rfkill video mmc_core iTCO_wdt bluetooth pcspkr iTCO_vendor_support cfg80211 hwmon output crc_itu_t joydev wmi [last unloaded: microcode] Pid: 2103, comm: rsyslogd Not tainted (2.6.27.19-170.2.35.fc10.i686 #1) 6464Y1E EIP: 0060:[<00000000>] EFLAGS: 00010046 CPU: 1 EIP is at 0x0 EAX: c9fecc00 EBX: c06b6680 ECX: 00000001 EDX: f7856680 ESI: f7856680 EDI: c9fecc00 EBP: c0884ebc ESP: c0884eac DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rsyslogd (pid: 2103, ti=c0884000 task=f4862670 task.ti=f49cb000) Stack: c04202e8 c9fecc00 f7856680 c9fecc00 c0884ec8 c0420425 00000001 c0884ef4 c042814c 00000000 00000001 c0884f04 00000001 00000001 00000086 c0884c6c f48c1734 00000001 c0884efc c04281ea c0884f10 c043ef71 00000000 c0884c6c Call Trace: [<c04202e8>] ? enqueue_task+0x4c/0x58 [<c0420425>] ? activate_task+0x19/0x1f [<c042814c>] ? try_to_wake_up+0x1a8/0x23b [<c04281ea>] ? default_wake_function+0xb/0xd [<c043ef71>] ? autoremove_wake_function+0xf/0x33 [<c042094e>] ? __wake_up_common+0x35/0x5b [<c0421f66>] ? __wake_up+0x28/0x3b [<f8a9ff9c>] ? iwl3945_irq_tasklet+0x665/0x8e8 [iwl3945] [<c04365f9>] ? process_timeout+0x0/0xa [<c0432129>] ? tasklet_action+0x7f/0xea [<c0432757>] ? __do_softirq+0x84/0x109 [<c04326d3>] ? __do_softirq+0x0/0x109 [<c0406f1c>] ? do_softirq+0x77/0xdb [<c04323be>] ? irq_exit+0x44/0x83 [<c04152b1>] ? smp_apic_timer_interrupt+0x6e/0x7c [<c040576d>] ? apic_timer_interrupt+0x2d/0x34 [<c06a007b>] ? agp_serverworks_probe+0xff/0x1bf [<c04193bf>] ? read_hpet+0xf/0x13 [<c04445f7>] ? getnstimeofday+0x54/0xe1 [<c0444695>] ? do_gettimeofday+0x11/0x2c [<c0431d75>] ? sys_gettimeofday+0x1d/0x58 [<c0404c8a>] ? syscall_call+0x7/0xb ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:c0884eac crash> quit I still have the vmcore file if needed. mharvey
iwl3945_mac_conf_tx wraps mutex_lock(&priv->mutex) around iwl3945_activate_qos iwlagn just uses priv->lock Proper usage of priv->mutex versus priv->lock in iwl3945 is unclear to me, so I'm making Intel team aware of the issue.
Created attachment 336678 [details] change locking Could you please test with attached patch?
Sorry. I rebuilt my O/S from scratch yesterday. This was my primary use system and I was getting Kernel panics in the middle of work and loosing work. I am running the Latest Fedora 10 and I have not seen the Kernel panic since I reinstalled the O/S. [mharvey@dhcp231-215 ~]$ uname -a Linux dhcp231-215.rdu.redhat.com 2.6.27.19-170.2.35.fc10.i686 #1 SMP Mon Feb 23 13:21:22 EST 2009 i686 i686 i386 GNU/Linux
That patch certainly matches the iwlagn version. Are you confident that it complies with the other usage of priv->mutex and priv->lock?
Protecting qos_data with priv->lock is the right thing to do and I am thus confident about this particular case. wrt the other usages of priv->mutex and priv->lock we may have a few cases that are still inconsistent/incorrect even after this fix.
Kernel w/ patch from comment 2 is building here: http://koji.fedoraproject.org/koji/buildinfo?buildID=96422 Please give that a try when the RPMs become available and post the results here...thanks!
In NEEDINFO state for 45 days, closing...