Description of problem: By following http://fedorahosted.org/sssd/wiki/Fedora_11_Test_Day/PAM_Local_Native I got to the test 8, where it fails: [marketa@viklef ~]$ ssh nativelocaluser@localhost nativelocaluser@localhost's password: Permission denied, please try again. nativelocaluser@localhost's password: Permission denied, please try again. nativelocaluser@localhost's password: Permission denied (publickey,gssapi-with-mic,password). [marketa@viklef ~]$ Version-Release number of selected component (if applicable): sssd-0.3.3-3.fc11.x86_64 How reproducible: 100% Steps to Reproduce: 1.see above 2. 3. Actual results: bad Expected results: good Additional info: [root@viklef sssd]# ----------------------------------------------------------- -bash: -----------------------------------------------------------: příkaz nenalezen [root@viklef sssd]# [sssd[pam]] [accept_priv_fd_handler] (4): Client connected to privileged pipe! [sssd[pam]] [pam_cmd_chauthtok] (4): entering pam_cmd_chauthtok [sssd[pam]] [pam_print_data] (4): command: 246 [sssd[pam]] [pam_print_data] (4): domain: (null) [sssd[pam]] [pam_print_data] (4): user: nativelocaluser [sssd[pam]] [pam_print_data] (4): service: passwd [sssd[pam]] [pam_print_data] (4): tty: pts/1 [sssd[pam]] [pam_print_data] (4): ruser: [sssd[pam]] [pam_print_data] (4): rhost: [sssd[pam]] [pam_print_data] (4): authtok type: 1 [sssd[pam]] [pam_print_data] (4): authtok size: 6 [sssd[pam]] [pam_print_data] (4): newauthtok type: 1 [sssd[pam]] [pam_print_data] (4): newauthtok size: 0 [sssd[pam]] [pam_print_data] (4): priv: 1 [sssd[pam]] [LOCAL_pam_handler] (4): LOCAL pam handler. [sssd[pam]] [local_handler_callback] (4): pam_handler_callback called with ldb_status [0]. [sssd[pam]] [local_handler_callback] (4): allowing root to reset a password. [sssd[pam]] [do_pam_chauthtok] (4): Using salt [vNRqOp/Zi0Sz.UGG] [sssd[pam]] [do_pam_chauthtok] (4): New hash [$6$vNRqOp/Zi0Sz.UGG$BKgXzCoGz5cuO9p8pAmSGbifMTU56CwzMC6upkbbOIynxl7nCz22cSuOXuzuqPW7HxONOfNaM3/DNKzfVJc9u/] [sssd[pam]] [set_user_attr_req] (4): entering set_user_attr_req [sssd[pam]] [set_user_attr_callback] (4): entering set_user_attr_callback, status [0][Success] [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply] (4): blen: 22 [sssd[pam]] [accept_priv_fd_handler] (4): Client connected to privileged pipe! [sssd[pam]] [pam_cmd_authenticate] (4): entering pam_cmd_authenticate [sssd[pam]] [pam_print_data] (4): command: 241 [sssd[pam]] [pam_print_data] (4): domain: (null) [sssd[pam]] [pam_print_data] (4): user: nativelocaluser [sssd[pam]] [pam_print_data] (4): service: sshd [sssd[pam]] [pam_print_data] (4): tty: ssh [sssd[pam]] [pam_print_data] (4): ruser: [sssd[pam]] [pam_print_data] (4): rhost: viklef.ceplovi.cz [sssd[pam]] [pam_print_data] (4): authtok type: 1 [sssd[pam]] [pam_print_data] (4): authtok size: 6 [sssd[pam]] [pam_print_data] (4): newauthtok type: 1 [sssd[pam]] [pam_print_data] (4): newauthtok size: 0 [sssd[pam]] [pam_print_data] (4): priv: 1 [sssd[pam]] [LOCAL_pam_handler] (4): LOCAL pam handler. [sssd[pam]] [local_handler_callback] (4): pam_handler_callback called with ldb_status [0]. [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], password hash: [$6$vNRqOp/Zi0Sz.UGG$BKgXzCoGz5cuO9p8pAmSGbifMTU56CwzMC6upkbbOIynxl7nCz22cSuOXuzuqPW7HxONOfNaM3/DNKzfVJc9u/] [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], new hash: [$6$vNRqOp/Zi0Sz.UGG$Z4KXqwuHdqeKAoyVUOcEgMGLcwzAuAyY/cxnDUzhV1tSyjVEQX6pV9Obnt69nwlcPMPOEKtNtQZlP4agNYai30] [sssd[pam]] [local_handler_callback] (1): Passwords do not match. [sssd[pam]] [set_user_attr_req] (4): entering set_user_attr_req [sssd[pam]] [set_user_attr_callback] (4): entering set_user_attr_callback, status [0][Success] [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply_delay] (4): pam_reply_delay get called. [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply] (4): blen: 22 [sssd[pam]] [pam_cmd_authenticate] (4): entering pam_cmd_authenticate [sssd[pam]] [pam_print_data] (4): command: 241 [sssd[pam]] [pam_print_data] (4): domain: (null) [sssd[pam]] [pam_print_data] (4): user: nativelocaluser [sssd[pam]] [pam_print_data] (4): service: sshd [sssd[pam]] [pam_print_data] (4): tty: ssh [sssd[pam]] [pam_print_data] (4): ruser: [sssd[pam]] [pam_print_data] (4): rhost: viklef.ceplovi.cz [sssd[pam]] [pam_print_data] (4): authtok type: 1 [sssd[pam]] [pam_print_data] (4): authtok size: 6 [sssd[pam]] [pam_print_data] (4): newauthtok type: 1 [sssd[pam]] [pam_print_data] (4): newauthtok size: 0 [sssd[pam]] [pam_print_data] (4): priv: 1 [sssd[pam]] [LOCAL_pam_handler] (4): LOCAL pam handler. [sssd[pam]] [local_handler_callback] (4): pam_handler_callback called with ldb_status [0]. [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], password hash: [$6$vNRqOp/Zi0Sz.UGG$BKgXzCoGz5cuO9p8pAmSGbifMTU56CwzMC6upkbbOIynxl7nCz22cSuOXuzuqPW7HxONOfNaM3/DNKzfVJc9u/] [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], new hash: [$6$vNRqOp/Zi0Sz.UGG$Z4KXqwuHdqeKAoyVUOcEgMGLcwzAuAyY/cxnDUzhV1tSyjVEQX6pV9Obnt69nwlcPMPOEKtNtQZlP4agNYai30] [sssd[pam]] [local_handler_callback] (1): Passwords do not match. [sssd[pam]] [set_user_attr_req] (4): entering set_user_attr_req [sssd[pam]] [set_user_attr_callback] (4): entering set_user_attr_callback, status [0][Success] [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply_delay] (4): pam_reply_delay get called. [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply] (4): blen: 22 [sssd[pam]] [pam_cmd_authenticate] (4): entering pam_cmd_authenticate [sssd[pam]] [pam_print_data] (4): command: 241 [sssd[pam]] [pam_print_data] (4): domain: (null) [sssd[pam]] [pam_print_data] (4): user: nativelocaluser [sssd[pam]] [pam_print_data] (4): service: sshd [sssd[pam]] [pam_print_data] (4): tty: ssh [sssd[pam]] [pam_print_data] (4): ruser: [sssd[pam]] [pam_print_data] (4): rhost: viklef.ceplovi.cz [sssd[pam]] [pam_print_data] (4): authtok type: 1 [sssd[pam]] [pam_print_data] (4): authtok size: 6 [sssd[pam]] [pam_print_data] (4): newauthtok type: 1 [sssd[pam]] [pam_print_data] (4): newauthtok size: 0 [sssd[pam]] [pam_print_data] (4): priv: 1 [sssd[pam]] [LOCAL_pam_handler] (4): LOCAL pam handler. [sssd[pam]] [local_handler_callback] (4): pam_handler_callback called with ldb_status [0]. [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], password hash: [$6$vNRqOp/Zi0Sz.UGG$BKgXzCoGz5cuO9p8pAmSGbifMTU56CwzMC6upkbbOIynxl7nCz22cSuOXuzuqPW7HxONOfNaM3/DNKzfVJc9u/] [sssd[pam]] [local_handler_callback] (4): user: [nativelocaluser], new hash: [$6$vNRqOp/Zi0Sz.UGG$Z4KXqwuHdqeKAoyVUOcEgMGLcwzAuAyY/cxnDUzhV1tSyjVEQX6pV9Obnt69nwlcPMPOEKtNtQZlP4agNYai30] [sssd[pam]] [local_handler_callback] (1): Passwords do not match. [sssd[pam]] [set_user_attr_req] (4): entering set_user_attr_req [sssd[pam]] [set_user_attr_callback] (4): entering set_user_attr_callback, status [0][Success] [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply_delay] (4): pam_reply_delay get called. [sssd[pam]] [pam_reply] (4): pam_reply get called. [sssd[pam]] [pam_reply] (4): blen: 22
This bug appears to have been reported against 'rawhide' during the Fedora 11 development cycle. Changing version to '11'. More information and reason for this action is here: http://fedoraproject.org/wiki/BugZappers/HouseKeeping
Fixed in sssd-1.0.1-1.fc11