Created attachment 359336 [details]
Mesages output for wlan0 

Description of problem:

Slow sluggish throughput.
What does this mean...
Hit enter or click then wait....for web page to display. 
Usually paints the screen in bursts.
Fairly useless this way.

Same response when accessing local device (Router)

Never never approaches "N" Speeds
Using WPA2 AES mode.

Router = Dlink DIR-655 latest firmware.
Card = Dlink DWA-652

Note: Cards must be inserted and ejected twice to work. 

I have two card with the same chipset they both behave the same way.
Ath5k on the same system works well, using of course a different card.

Version-Release number of selected component (if applicable):


How reproducible:
Always


Steps to Reproduce: See above.
1.
2.
3.
  
Actual results:


Expected results:


Additional info:

iwconfig output:

wlan0     IEEE 802.11bgn  ESSID:"ReKaB164"  
          Mode:Managed  Frequency:2.442 GHz  Access Point: 00:19:5B:60:2F:6B   
          Bit Rate=1 Mb/s   Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Power Management:off
          Link Quality=60/100  Signal level:-50 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


lspci-vv output:

02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
	Subsystem: D-Link System Inc Device 3a6e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 44000000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k

Dmesg output:

pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
wlan2: deauthenticating by local choice (reason=3)
ath5k 0000:02:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
ath9k 0000:02:00.0: enabling device (0000 -> 0002)
ath9k 0000:02:00.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
wmaster0 (ath9k): not using net_device_ops yet
phy7: Selected rate control algorithm 'ath9k_rate_control'
wlan0 (ath9k): not using net_device_ops yet
Registered led device: ath9k-phy7:radio
Registered led device: ath9k-phy7:assoc
Registered led device: ath9k-phy7:tx
Registered led device: ath9k-phy7:rx
phy7: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf8180000, irq=11
cfg80211: Calling CRDA for country: US
ADDRCONF(NETDEV_UP): wlan0: link is not ready

Note: Stalled here ejected card to "wake it up"

pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
wlan0: deauthenticating by local choice (reason=3)
ath9k 0000:02:00.0: PCI INT A disabled
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
ath9k 0000:02:00.0: enabling device (0000 -> 0002)
ath9k 0000:02:00.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
wmaster0 (ath9k): not using net_device_ops yet
phy8: Selected rate control algorithm 'ath9k_rate_control'
wlan0 (ath9k): not using net_device_ops yet
Registered led device: ath9k-phy8:radio
Registered led device: ath9k-phy8:assoc
Registered led device: ath9k-phy8:tx
Registered led device: ath9k-phy8:rx
phy8: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf81a0000, irq=11
cfg80211: Calling CRDA for country: US
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ALSA sound/core/pcm_lib.c:166: BUG: stream = 0, pos = 0x4000, buffer size = 0x4000, period size = 0x372
wlan0: authenticate with AP 00:19:5b:60:2f:6b
wlan0: authenticated
wlan0: associate with AP 00:19:5b:60:2f:6b
wlan0: RX AssocResp from 00:19:5b:60:2f:6b (capab=0x431 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present