Description of problem: Canon PIXMA MP250 is listed as supported by the gutenprint driver. But on F16 liveCD beta the printer is correctly detected as Canon PIXMA MP250, but the user is reported that the printer does not have drivers for this printer. Version-Release number of selected component (if applicable): - Fedora 16 LiveCD Beta How reproducible: - Plug the printer and see. Steps to Reproduce: 1. Plug the printer 2. The notification appears. 3. Actual results: Printer queue is not installed. Expected results: Printer should be detected and drivers loaded acordingly. Additional info:
What does this command say?: su -c "lpinfo -l -v"
Output of command: [liveuser@localhost ~]$ su -c "lpinfo -l -v" Device: uri = http class = network info = Internet Printing Protocol (http) make-and-model = Unknown device-id = location = Device: uri = ipp class = network info = Internet Printing Protocol (ipp) make-and-model = Unknown device-id = location = Device: uri = ipps class = network info = Internet Printing Protocol (ipps) make-and-model = Unknown device-id = location = Device: uri = lpd class = network info = LPD/LPR Host or Printer make-and-model = Unknown device-id = location = Device: uri = https class = network info = Internet Printing Protocol (https) make-and-model = Unknown device-id = location = Device: uri = usb://Canon/MP250%20series class = direct info = Canon MP250 series make-and-model = Canon MP250 series device-id = MFG:Canon;CMD:BJL,BJRaster3,BSCCe,IVEC,IVECPLI;SOJ:TXT01;MDL:MP250 series;CLS:PRINTER;DES:Canon MP250 series;VER:2.010;STA:10;FSI:00;HRI:PAM;MSI:DAT,E3;PDR:9;PSE:LCHE12303; location = Device: uri = socket class = network info = AppSocket/HP JetDirect make-and-model = Unknown device-id = location = Device: uri = serial:/dev/ttyS0?baud=115200 class = serial info = Serial Port #1 make-and-model = Unknown device-id = location =
Output of lsusb [liveuser@localhost ~]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 001 Device 003: ID 059b:0470 Iomega Corp. Prestige Portable Hard Drive Bus 004 Device 002: ID 04d9:0499 Holtek Semiconductor, Inc. Optical Mouse Bus 005 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate i200 Keyboard Bus 001 Device 006: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 001 Device 007: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 001 Device 008: ID 04a9:173a Canon, Inc. $ lsusb -t 1-2.3.2:1.0: No such file or directory 1-4:1.0: No such file or directory /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M |__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M |__ Port 2: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M |__ Port 3: Dev 6, If 0, Class=hub, Driver=hub/3p, 12M |__ Port 2: Dev 7, If 0, Class=scard, Driver=, 12M |__ Port 4: Dev 8, If 0, Class=vend., Driver=, 480M |__ Port 4: Dev 8, If 1, Class=print, Driver=usblp, 480M |__ Port 5: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M And Verbose output just for the printer Bus 001 Device 008: ID 04a9:173a Canon, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x173a bcdDevice 0.01 iManufacturer 1 Canon iProduct 2 MP250 series iSerial 3 2A7E97 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0
gutenprint-5.2.7-7.fc16 has been submitted as an update for Fedora 16. https://admin.fedoraproject.org/updates/gutenprint-5.2.7-7.fc16
gutenprint-5.2.7-7.fc15 has been submitted as an update for Fedora 15. https://admin.fedoraproject.org/updates/gutenprint-5.2.7-7.fc15
gutenprint-5.2.7-7.fc14 has been submitted as an update for Fedora 14. https://admin.fedoraproject.org/updates/gutenprint-5.2.7-7.fc14
Package gutenprint-5.2.7-7.fc15: * should fix your issue, * was pushed to the Fedora 15 testing repository, * should be available at your local mirror within two days. Update it with: # su -c 'yum update --enablerepo=updates-testing gutenprint-5.2.7-7.fc15' as soon as you are able to. Please go to the following url: https://admin.fedoraproject.org/updates/FEDORA-2011-15367 then log in and leave karma (feedback).
gutenprint-5.2.7-7.fc16 has been pushed to the Fedora 16 stable repository. If problems still persist, please make note of it in this bug report.
gutenprint-5.2.7-7.fc15 has been pushed to the Fedora 15 stable repository. If problems still persist, please make note of it in this bug report.