Description of problem: Yukon Optima 88E8059 ethernet controller connects only with 10 Mbps: $ dmesg | grep sky2 [ 14.966741] sky2: driver version 1.29 [ 14.966795] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 14.966817] sky2 0000:06:00.0: setting latency timer to 64 [ 14.966871] sky2 0000:06:00.0: Yukon-2 Optima chip revision 1 [ 14.967003] sky2 0000:06:00.0: irq 42 for MSI/MSI-X [ 14.967275] sky2 0000:06:00.0: eth0: addr 00:24:54:89:1c:b1 [ 23.591940] NetworkManager[1086]: <info> (p3p1): new Ethernet device (driver: 'sky2' ifindex: 2) [ 23.591947] NetworkManager[1086]: NetworkManager[1086]: <info> (p3p1): new Ethernet device (driver: 'sky2' ifindex: 2) [ 23.594124] sky2 0000:06:00.0: p3p1: enabling interface [ 25.407704] sky2 0000:06:00.0: p3p1: Link is up at 10 Mbps, full duplex, flow control both $ lspci | grep Eth 06:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11) Version-Release number of selected component (if applicable): Fedora 16 $ uname -r 3.1.2-1.fc16.x86_64 How reproducible: Install Fedora 16, try to connect to 100Mbps network Actual results: # ethtool p3p1 Settings for p3p1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pg Wake-on: d Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err Link detected: yes Expected results: having 100Mbps network connection Additional info: With Ubuntu Oneiric and kernel 3.0.0 problem did not appear Smolt hardware profile: http://www.smolts.org/client/show/pub_0c939ea4-9cf9-4945-92bf-93298006292a
I also have this problem with sky2 driver. The card works fine if using the sk98lin driver from Marvell site.
This will be fixed in the next kernel update (3.1.5)
kernel-3.1.5-1.fc16 has been submitted as an update for Fedora 16. https://admin.fedoraproject.org/updates/kernel-3.1.5-1.fc16
Package kernel-3.1.5-1.fc16: * should fix your issue, * was pushed to the Fedora 16 testing repository, * should be available at your local mirror within two days. Update it with: # su -c 'yum update --enablerepo=updates-testing kernel-3.1.5-1.fc16' as soon as you are able to, then reboot. Please go to the following url: https://admin.fedoraproject.org/updates/FEDORA-2011-16840/kernel-3.1.5-1.fc16 then log in and leave karma (feedback).
kernel-2.6.41.5-1.fc15 has been submitted as an update for Fedora 15. https://admin.fedoraproject.org/updates/kernel-2.6.41.5-1.fc15
kernel-3.1.5-1.fc16 has been pushed to the Fedora 16 stable repository. If problems still persist, please make note of it in this bug report.
kernel-2.6.41.5-4.fc15 has been submitted as an update for Fedora 15. https://admin.fedoraproject.org/updates/kernel-2.6.41.5-4.fc15
kernel-2.6.41.6-1.fc15 has been submitted as an update for Fedora 15. https://admin.fedoraproject.org/updates/kernel-2.6.41.6-1.fc15