Description of Problem: When I have the root usb enabled on the motherboard whether using a ps/2 or usb mouse I can not start kde it tends to crash while attempting to load the window manager and all response to the keyboard and mouse is lost causeing me to reboot uncleanly. Also under Gnome running xmms while using the Open-Gl spectrum analyzer plugin or running xine and attempting to move the film forward in the stream or attempting to adjust anything in the xine control center such as brightness and sometimes while changing xine themes or playing in fast forward causes the same issue. And not related to this release but I was unable to load version 7.3 at all. NOTE: I always check the md5sums on my CDs. NOTE: I have also checked for broken packages installed on the system and they are all ok. Version-Release number of selected component (if applicable): Linux version 2.4.18-18.8.0 (bhcompile.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Nov 13 23:10:57 EST 2002 Additional Information: Motherboard is FIC VA-503+ BIOS je4333 This is with usb disabled: sh-2.05b# dmesg Linux version 2.4.18-18.8.0 (bhcompile.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Nov 13 23:10:57 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff0800 (ACPI NVS) BIOS-e820: 000000000fff0800 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 400.913 MHz processor. Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized Console: colour VGA+ 80x25 Calibrating delay loop... 799.53 BogoMIPS Memory: 253516k/262080k available (1194k kernel code, 6132k reserved, 985k data, 160k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 4096 (order: 3, 32768 bytes) ramfs: mounted with options: <defaults> ramfs: max_pages=31945 max_file_pages=0 max_inodes=0 max_dentries=31945 Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: L2 Cache: 256K (32 bytes/line) CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002 CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D+ Processor stepping 01 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: 00:07.3: class 604 doesn't match header type 00. Ignoring class. PCI: Using IRQ router VIA [1106/0586] at 00:07.0 Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: Card 'Crystal Codec' isapnp: 1 Plug & Play card detected total speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS2 at 0x03e8 (irq = 4) is a 16550A ttyS3 at 0x02e8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 480 slots per queue, batch=120 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA hda: C/H/S=19618/16/255 from BIOS ignored hda: Maxtor 34098H4, ATA DISK drive hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive hdd: CR-4804TE, ATAPI CD/DVD-ROM drive ide2: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=79408/16/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 126k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 160k freed EXT3FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal Adding Swap: 524152k swap-space (priority -1) ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 ad1848: WSS/SB detected ad1848: ISAPnP reports 'WSS/SB' at i/o 0x534, irq 5, dma 1, 3 cs4232: set synthio and synthirq to use the wavefront facilities. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: ATAPI 4X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MITSUMI Model: CR-4804TE Rev: 3.0D Type: CD-ROM ANSI SCSI revision: 02 parport0: PC-style at 0x278 (0x678) [PCSPP,TRISTATE,EPP] parport0: irq 5 detected ohci1394: pci_module_init failed ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (2047 buckets, 16376 max) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw.com.sg> and others PCI: Found IRQ 9 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 10, want irq 9 divert: allocating divert_blk for eth0 eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:90:27:A2:CF:AA, IRQ 10. Board assembly 721383-007, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Detected Via MVP3 chipset agpgart: AGP aperture is 32M @ 0xe4000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 sh-2.05b# cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev 4). Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe4000000 [0xe5ffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 71). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). Master Capable. Latency=64. I/O at 0xe000 [0xe00f]. Bus 0, device 7, function 3: PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16). IRQ 9. Bus 0, device 10, function 0: Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8). IRQ 10. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xe9100000 [0xe9100fff]. I/O at 0xe800 [0xe83f]. Non-prefetchable 32 bit memory at 0xe9000000 [0xe90fffff]. Bus 1, device 0, function 0: VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1). IRQ 9. Non-prefetchable 32 bit memory at 0xe0000000 [0xe1ffffff]. Prefetchable 32 bit memory at 0xe6000000 [0xe7ffffff]. I/O at 0xd000 [0xd0ff]. sh-2.05b# cat /proc/isapnp Card 1 'CSC4236:Crystal Codec' PnP version 1.0 Product version 0.5 Logical device 0 'CSC0000:WSS/SB' Device is active Active port 0x534,0x388,0x220 Active IRQ 5 [0x2] Active DMA 1,3 Resources 0 Priority preferred Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding IRQ 5 High-Edge DMA 1 8-bit byte-count compatible DMA 0,3 8-bit byte-count compatible Alternate resources 0:1 Priority acceptable Port 0x534-0xffc, align 0x3, size 0x4, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x220-0x260, align 0x1f, size 0x10, 16-bit address decoding IRQ 5,7,2/9,11,12,15 High-Edge DMA 1,3 8-bit byte-count compatible DMA 0,1,3 8-bit byte-count compatible Alternate resources 0:2 Priority functional Port 0x534-0xffc, align 0x3, size 0x4, 16-bit address decoding Port 0x388-0x3f8, align 0x7, size 0x4, 16-bit address decoding Port 0x220-0x300, align 0x1f, size 0x10, 16-bit address decoding IRQ 5,7,2/9,11,12,15 High-Edge DMA 0,1,3 8-bit byte-count compatible Logical device 1 'CSC0001:GAME' Device is not active Resources 0 Priority preferred Port 0x200-0x200, align 0x7, size 0x8, 16-bit address decoding Alternate resources 0:1 Priority acceptable Port 0x208-0x208, align 0x7, size 0x8, 16-bit address decoding Logical device 2 'CSC0010:CTRL' Device is not active Resources 0 Priority preferred Port 0x120-0xff8, align 0x7, size 0x8, 16-bit address decoding Logical device 3 'CSC0003:MPU' Device is not active Resources 0 Priority preferred Port 0x330-0x330, align 0x7, size 0x2, 16-bit address decoding IRQ 2/9 High-Edge Alternate resources 0:1 Priority acceptable Port 0x330-0x360, align 0x7, size 0x2, 16-bit address decoding IRQ 2/9,11,12,15 High-Edge Alternate resources 0:2 Priority functional Port 0x330-0x3e0, align 0x7, size 0x2, 16-bit address decoding And yes the problem existed with prior kernels. Hopefully I am in the right place.
*** This bug has been marked as a duplicate of 78533 ***
Changed to 'CLOSED' state since 'RESOLVED' has been deprecated.