From Bugzilla Helper: User-Agent: Mozilla/5.0 Galeon/1.2.6 (X11; Linux i686; U;) Gecko/20020830 Description of problem: During installation of Phoebe, and afterwards using redhat-config-xfree86 the maximum resolution which can be set using the ATI Rage Pro (AGP, 8Mb Memory) is 800x600. Under Valhalla- (an Mandrake 9.0) the max resolution which can be set for this card is higher than 1024x768 (although I can't remember exactly what it is). Version-Release number of selected component (if applicable): How reproducible: Always Steps to Reproduce: 1. install phoebe and configure x 2. or 3. redhat-config-xfree86 Actual Results: Max resolution 800x600 Expected Results: Max resolution higher than 1024x768 Additional info: lspci -v 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage Pro Turbo AGP 2X Flags: bus master, stepping, medium devsel, latency 64, IRQ 11 Memory at d4000000 (32-bit, non-prefetchable) [size=16M] I/O ports at d000 [size=256] Memory at d6000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] AGP version 1.0 extract from /etc/X11/XF86-Config Section "Device" Identifier "device1" VendorName "ATI" BoardName "ATI Mach64 Utah" (don't have access to the phoebe box today, but this is a Mandrake 9.0 with the same card in).
Just installed Phoebe2, and 1024x768 was available as the maximum resolution as expected.
Closing as RAWHIDE as you've indicated it's fixed above now.