Note: This bug is displayed in read-only format because
the product is no longer active in Red Hat Bugzilla.
RHEL Engineering is moving the tracking of its product development work on RHEL 6 through RHEL 9 to Red Hat Jira (issues.redhat.com). If you're a Red Hat customer, please continue to file support cases via the Red Hat customer portal. If you're not, please head to the "RHEL project" in Red Hat Jira and file new tickets here. Individual Bugzilla bugs in the statuses "NEW", "ASSIGNED", and "POST" are being migrated throughout September 2023. Bugs of Red Hat partners with an assigned Engineering Partner Manager (EPM) are migrated in late September as per pre-agreed dates. Bugs against components "kernel", "kernel-rt", and "kpatch" are only migrated if still in "NEW" or "ASSIGNED". If you cannot log in to RH Jira, please consult article #7032570. That failing, please send an e-mail to the RH Jira admins at rh-issues@redhat.com to troubleshoot your issue as a user management inquiry. The email creates a ServiceNow ticket with Red Hat. Individual Bugzilla bugs that are migrated will be moved to status "CLOSED", resolution "MIGRATED", and set with "MigratedToJIRA" in "Keywords". The link to the successor Jira issue will be found under "Links", have a little "two-footprint" icon next to it, and direct you to the "RHEL project" in Red Hat Jira (issue links are of type "https://issues.redhat.com/browse/RHEL-XXXX", where "X" is a digit). This same link will be available in a blue banner at the top of the page informing you that that bug has been migrated.
DescriptionSoeren Grunewald
2012-05-29 12:13:53 UTC
Created attachment 587392[details]
/var/log/messages
Description of problem:
When writing data to an sd-card the we get write errors.
We use a script to create partitions and format a brand new sd-card. This worked with rhel5.x for ~2years without any problems. Now we got new sd-cards from a new vendor and we got this issues. So we updated to rhel6.2 but the issue is still pressent.
The issue can not be seen on a fedora17 or ubuntu11.10 with the same card reader and sd-card.
Version-Release number of selected component (if applicable):
[user@localhost]$ rpm -qa | grep kernel | sort
dracut-kernel-004-256.el6_2.1.noarch
kernel-2.6.32-220.17.1.el6.i686
kernel-firmware-2.6.32-220.17.1.el6.noarch
[user@localhost]$ uname -a
Linux avionic-0014 2.6.32-220.17.1.el6.i686 #1 SMP Tue May 15 22:09:39 BST 2012 i686 i686 i386 GNU/Linux
[user@localhost]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer
[user@localhost]$ sudo lsusb -v -s 1:3
Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1307 Transcend Information, Inc.
idProduct 0x0330 63-in-1 Multi-Card Reader/Writer
bcdDevice 1.00
iManufacturer 1 Generic
iProduct 2 Mass Storage Device
iSerial 3 00000000000006
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
How reproducible:
Always
Steps to Reproduce:
1. bootup system and login
2. connect sd-card reader
3. put in sd-card
4. write data on the coard
Actual results:
errors during write.
Expected results:
data written without any errors
Additional info:
The system is a fresh installation.
The issue does not appear with every sd-card type.
Comment 3RHEL Program Management
2012-07-10 08:28:30 UTC
This request was not resolved in time for the current release.
Red Hat invites you to ask your support representative to
propose this request, if still desired, for consideration in
the next release of Red Hat Enterprise Linux.
Comment 4RHEL Program Management
2012-07-10 23:49:39 UTC
This request was erroneously removed from consideration in Red Hat Enterprise Linux 6.4, which is currently under development. This request will be evaluated for inclusion in Red Hat Enterprise Linux 6.4.
Comment 5RHEL Program Management
2012-12-14 08:26:27 UTC
This request was not resolved in time for the current release.
Red Hat invites you to ask your support representative to
propose this request, if still desired, for consideration in
the next release of Red Hat Enterprise Linux.
Created attachment 587392 [details] /var/log/messages Description of problem: When writing data to an sd-card the we get write errors. We use a script to create partitions and format a brand new sd-card. This worked with rhel5.x for ~2years without any problems. Now we got new sd-cards from a new vendor and we got this issues. So we updated to rhel6.2 but the issue is still pressent. The issue can not be seen on a fedora17 or ubuntu11.10 with the same card reader and sd-card. Version-Release number of selected component (if applicable): [user@localhost]$ rpm -qa | grep kernel | sort dracut-kernel-004-256.el6_2.1.noarch kernel-2.6.32-220.17.1.el6.i686 kernel-firmware-2.6.32-220.17.1.el6.noarch [user@localhost]$ uname -a Linux avionic-0014 2.6.32-220.17.1.el6.i686 #1 SMP Tue May 15 22:09:39 BST 2012 i686 i686 i386 GNU/Linux [user@localhost]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58) Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer [user@localhost]$ sudo lsusb -v -s 1:3 Bus 001 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1307 Transcend Information, Inc. idProduct 0x0330 63-in-1 Multi-Card Reader/Writer bcdDevice 1.00 iManufacturer 1 Generic iProduct 2 Mass Storage Device iSerial 3 00000000000006 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) How reproducible: Always Steps to Reproduce: 1. bootup system and login 2. connect sd-card reader 3. put in sd-card 4. write data on the coard Actual results: errors during write. Expected results: data written without any errors Additional info: The system is a fresh installation. The issue does not appear with every sd-card type.