Description of problem: kernel-kirkwood-3.4.2-4.fc17.armv5tel does not boot. The previously available kernel kernel-kirkwood-3.4.2-3.fc17.armv5tel boots just fine. Version-Release number of selected component (if applicable): kernel-kirkwood-3.4.2-4.fc17.armv5tel How reproducible: Always Steps to Reproduce: 1. Update kernel 2. Reboot 3. Actual results: Only text printed on console: Starting kernel ... Uncompressing Linux... done, booting the kernel. Expected results: A bootable kernel. Additional info:
Fixed in: kernel-kirkwood-3.4.3-1.fc17.armv5tel This bug can be closed.
Reopening Broken again in kernel-kirkwood-3.4.4-5.fc17.armv5tel.
Working again in kernel-kirkwood-3.4.6-2.fc17.armv5tel: https://arm.koji.fedoraproject.org/koji/rpminfo?rpmID=327348
Broken again but in a different way for 3.5.0-2.fc17.armv5tel.kirkwood. Strangely, the system clock is set to a different date each boot. I know without a RTC, the value will be meaningless, but I would have expected the equivalent of all high bits or all low bits. ## Booting kernel from Legacy Image at 00800000 ... Image Name: 3.5.0-2.fc17.armv5tel.kirkwood Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3342688 Bytes = 3.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12361460 Bytes = 11.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-2.fc17.armv5tel.kirkwood (mockbuild@hsv-panda -1-v5tel.farm.hsv.redhat.com) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC ) ) #1 Wed Aug 1 09:47:49 EDT 2012 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 7 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell GuruPlug Reference Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootd elay=10 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 499048k/499048k available, 25240k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05f3260 (6061 kB) [ 0.000000] .init : 0xc05f4000 - 0xc063ab7c ( 283 kB) [ 0.000000] .data : 0xc063c000 - 0xc0692970 ( 347 kB) [ 0.000000] .bss : 0xc0692994 - 0xc076c37c ( 871 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, N odes=1 [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474 ms [ 0.000000] Console: colour dummy device 80x30 [ 17.682784] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 17.772716] pid_max: default: 32768 minimum: 301 [ 17.772819] Security Framework initialized [ 17.772859] SELinux: Initializing. [ 17.773077] Mount-cache hash table entries: 512 [ 17.773623] Initializing cgroup subsys cpuacct [ 17.773636] Initializing cgroup subsys memory [ 17.773663] Initializing cgroup subsys devices [ 17.773671] Initializing cgroup subsys freezer [ 17.773678] Initializing cgroup subsys net_cls [ 17.773684] Initializing cgroup subsys blkio [ 17.773690] Initializing cgroup subsys perf_event [ 17.773768] CPU: Testing write buffer coherency: ok [ 17.773841] ftrace: allocating 18145 entries in 36 pages [ 17.800131] Setting up static identity map for 0x4417b0 - 0x4417ec [ 17.802436] devtmpfs: initialized [ 17.803715] atomic64 test passed [ 17.803939] NET: Registered protocol family 16 [ 17.804448] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 17.804462] Feroceon L2: Cache support initialised, in WT override mode. [ 17.809735] bio: create slab <bio-0> at 0 [ 17.810153] vgaarb: loaded [ 17.810470] SCSI subsystem initialized [ 17.810841] usbcore: registered new interface driver usbfs [ 17.810892] usbcore: registered new interface driver hub [ 17.811002] usbcore: registered new device driver usb [ 17.811631] NetLabel: Initializing [ 17.811640] NetLabel: domain hash size = 128 [ 17.811645] NetLabel: protocols = UNLABELED CIPSOv4 [ 17.811691] NetLabel: unlabeled traffic allowed by default [ 17.811781] Switching to clocksource orion_clocksource [ 17.831632] NET: Registered protocol family 2 [ 17.831856] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 17.832214] TCP established hash table entries: 16384 (order: 5, 131072 bytes ) [ 17.832568] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 17.832746] TCP: Hash tables configured (established 16384 bind 16384) [ 17.832752] TCP: reno registered [ 17.832762] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 17.832783] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 17.832975] NET: Registered protocol family 1 [ 17.833185] Unpacking initramfs... [ 18.921419] Freeing initrd memory: 12068K [ 18.922096] audit: initializing netlink socket (disabled) [ 18.922135] type=2000 audit(1.230:1): initialized [ 19.033647] VFS: Disk quotas dquot_6.5.2 [ 19.033851] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.035803] msgmni has been set to 998 [ 19.037529] alg: No test for stdrng (krng) [ 19.037550] NET: Registered protocol family 38 [ 19.037752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52) [ 19.037891] io scheduler noop registered [ 19.037899] io scheduler deadline registered [ 19.037939] io scheduler cfq registered (default) [ 19.038399] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 19.038440] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 19.071915] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 19.111910] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 19.151910] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 19.191909] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 19.192251] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 19.213003] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 19.711656] console [ttyS0] enabled [ 19.719340] loop: module loaded [ 19.723147] Fixed MDIO Bus: probed [ 19.726806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 19.733433] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 19.738865] orion-ehci orion-ehci.0: new USB bus registered, assigned bus num ber 1 [ 19.771841] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 19.791821] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 19.797832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 19.804664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 19.811930] usb usb1: Product: Marvell Orion EHCI [ 19.816655] usb usb1: Manufacturer: Linux 3.5.0-2.fc17.armv5tel.kirkwood ehci _hcd [ 19.824182] usb usb1: SerialNumber: orion-ehci.0 [ 19.829290] hub 1-0:1.0: USB hub found [ 19.833088] hub 1-0:1.0: 1 port detected [ 19.837289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.843559] uhci_hcd: USB Universal Host Controller Interface driver [ 19.850162] usbcore: registered new interface driver usbserial [ 19.856087] usbcore: registered new interface driver usbserial_generic [ 19.862688] USB Serial support registered for generic [ 19.867759] usbserial: USB Serial Driver core [ 19.872309] mousedev: PS/2 mouse device common for all mice [ 19.878438] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 19.884816] device-mapper: uevent: version 1.0.3 [ 19.889763] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-d evel [ 19.898515] cpuidle: using governor ladder [ 19.902725] cpuidle: using governor menu [ 19.907262] usbcore: registered new interface driver usbhid [ 19.912875] usbhid: USB HID core driver [ 19.916789] drop_monitor: Initializing network drop monitor service [ 19.923413] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.928790] TCP: cubic registered [ 19.932191] Initializing XFRM netlink socket [ 19.937202] NET: Registered protocol family 10 [ 19.942475] mip6: Mobile IPv6 [ 19.945458] NET: Registered protocol family 17 [ 19.949965] Key type dns_resolver registered [ 19.954809] registered taskstats version 1 [ 19.959225] rtc-mv rtc-mv: setting system clock to 2022-04-03 20:51:15 UTC (1 649019075)
From a boot of a working 3.3.6-3.fc17.armv5tel.kirkwood: [ 19.311948] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Also hangs when setting system clock on 3.5.2-3.fc17.armv5tel.kirkwood.
Also seen on 3.5.3-1.fc17.armv5tel.kirkwood [ 20.056030] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) This is running an a PogoPlug-v2 arcNumber 2998, but also test booting with arcNumber 2997 (sheevaplug). I have spare hardware at my disposal and willing to test binaries. No issue with GA release 3.4.2-3.fc17.armv5tel.kirkwood
Also seen on 3.5.6-1.fc17.armv5tel.kirkwood hangs here: [ 8.860657] Key type dns_resolver registered [ 8.865508] registered taskstats version 1 [ 8.869909] rtc-mv rtc-mv: >setting system clock to 2012-12-10 04:11:01 UTC (1355112661) Platform is Sheeva Plug 003-SP1001, system on usb stick. Switching back to 3.4.2-3.fc17.armv5tel.kirkwood boots OK.
Fixed in: kernel-kirkwood-3.7.6-102.fc17.armv5tel