Description of problem: The latest errata kernel does not support the SysKonnect SK-9821 V2.0 Gigabit Ethernet adapter. Kernel 2.4.18-27.7.x includes version 4.06 of the sk98lin module but according to http://www.syskonnect.de/syskonnect/support/driver/readme/sk98lin_v605.htm#Section8 at least version 6.00 is needed for the V2.0 adapters. Version-Release number of selected component (if applicable): kernel-2.4.18-27.7.x How reproducible: Always Steps to Reproduce: Additional info: lspci -vv output: 00:08.0 Ethernet controller: Syskonnect (Schneider & Koch): Unknown device 4320 (rev 14) Subsystem: Syskonnect (Schneider & Koch): Unknown device 5021 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (5750ns min, 7750ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at e000 [size=256] Expansion ROM at fe000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=7 DScale=1 PME- Capabilities: [50] Vital Product Data
Thanks for the bug report. However, Red Hat no longer maintains this version of the product. Please upgrade to the latest version and open a new bug if the problem persists. The Fedora Legacy project (http://fedoralegacy.org/) maintains some older releases, and if you believe this bug is interesting to them, please report the problem in the bug tracker at: http://bugzilla.fedora.us/