Description of problem: I'm trying to install some RHEL5 Vms on a newly installed F19 beta-rc4, using the latest update-testing updates and once the VM loads the kernel, it just hang there without any message on the screen. I tried many different ways to install it (and kernel options) but none made a difference How reproducible: In make, just try to install rhel5 as Guest. It always gives the same result. Steps to Reproduce: 1. Install rhel5 by using virt-install or virt-manager 2. Start the installation Actual results: System hang Expected results: The installation should continue Additional info: This is one example of the qemu log: LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -name rhel6-base -S -machine pc-i440fx-1.4,accel=kvm,usb=off -m 512 -smp 1,sockets=1,cores=1,threads=1 -uuid c400bc10-51fe-0eb0-6cd9-b8adc9a81895 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/rhel6-base.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/dev/mapper/vgdata-rhel6--base,if=none,id=drive-ide0-0-0,format=raw -device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive if=none,id=drive-ide0-1-0,readonly=on,format=raw -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=24,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:a8:db:c2,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 (label charserial0) qemu: terminating on signal 15 from pid 1030 2013-05-28 09:36:00.532+0000: shutting down The same configuration is working on F18
Does the host kernel make a difference? I.e., is this a duplicate of BZ 965711 ?
I tried to change to the 3.10 kernel and now the VM has a bit different behaviour. After the boot the VM go into Paused and then I get an error. Checking the logs I see this: 2013-05-29 07:28:42.809+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -name rhel5-base -S -machine pc-i440fx-1.4,accel=kvm,usb=off -m 512 -smp 1,sockets=1,cores=1,threads=1 -uuid e077abb7-870c-9e1f-eff8-eb1a74b351f5 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/rhel5-base.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device lsi,id=scsi0,bus=pci.0,addr=0x5 -drive file=/dev/mapper/vgdata-rhel5--base,if=none,id=drive-scsi0-0-0,format=raw -device scsi-hd,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0,bootindex=2 -drive file=/mnt/iso/rhel-server-5.6-x86_64-dvd.iso,if=none,id=drive-ide0-1-0,readonly=on,format=raw -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0,bootindex=1 -netdev tap,fd=24,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:f1:9f:94,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/1 (label charserial0) KVM internal error. Suberror: 1 emulation failure RAX=0000000000039000 RBX=00000000004ae000 RCX=0000000000000000 RDX=0000000000000800 RSI=0000000000039000 RDI=00000000006af6a0 RBP=0000000000200000 RSP=00000000006af5e0 R8 =0000000000000000 R9 =00000000004ae000 R10=0000000000000000 R11=0000000000000000 R12=0000000000030000 R13=00000000006b7000 R14=00000000001fa70f R15=0000000000000000 RIP=00000000006a8a29 RFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 0000000000000000 00000000 00000000 CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA] SS =0000 0000000000000000 00000000 00000000 DS =0000 0000000000000000 00000000 00000000 FS =0000 0000000000000000 0000ffff 00009300 DPL=0 DS16 [-WA] GS =ffff 00000000000ffff0 0000ffff 00009300 DPL=0 DS16 [-WA] LDT=0000 0000000000000000 0000ffff 00008200 DPL=0 LDT TR =0000 0000000000000000 0000ffff 00008b00 DPL=0 TSS64-busy GDT= 00000000002fd638 00000020 IDT= 0000000000000000 00000000 CR0=80000011 CR2=0000000000000000 CR3=00000000006b1000 CR4=00000020 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000500 Code=00 00 e9 50 ff ff ff 00 00 00 00 85 d2 74 20 45 31 c0 31 c9 <0f> 1f 80 00 00 00 00 0f b6 04 31 41 83 c0 01 88 04 39 48 83 c1 01 41 39 d0 75 ec 48 89 f8 qemu: terminating on signal 15 from pid 1078 2013-05-29 07:29:39.990+0000: shutting down I cannot use the 3.8 as it gives me too many errors (like udev killed processes or KVM not working as it should).
RHEL4 for example seems to work nicely. Trying to run 3.8 from upstream, gives me a lot of errors.
Pretty sure this is a dup, please reopen if I'm wrong. *** This bug has been marked as a duplicate of bug 967652 ***