Description of problem: It reports "An error appeared in the UI: < InvalidData 'The field must contain a valid IPv6 address or an empty string.'>" when configure network with static IPv6 mode. Version-Release number of selected component (if applicable): rhev-hypervisor6-6.5-20130725.0.el6 How reproducible: 100% Steps to Reproduce: 1. Install rhevh6.5. 2. Select a NIC and configure it with IPv6 Static mode. Bootprotocol : ( ) Disabled ( ) Auto ( ) DHCP ( ) Static IP Address : 2001::10 Netmask : 64 Gateway : 2001::1 Actual results: 1. After step2, it reports "An error appeared in the UI: < InvalidData 'The field must contain a valid IPv6 address or an empty string.'> ". Expected results: 1. After step2, it can set ipv6 address with static mode successfully. Additional info:
Test version: rhev-hypervisor6-6.5-20131031.1 ovirt-node-3.0.1-7.el6.noarch Test steps: 1. Install rhevh6.5. 2. Select a NIC and configure it with IPv6 Static mode. Bootprotocol : ( ) Disabled ( ) Auto ( ) DHCP (*) Static IP Address : 2001::100 Netmask : 48 Gateway : 2001::1 Test result: 1. After step2, it can set IPv6 address successfully. This bug is fixed in rhev-hypervisor6-6.5-20131031.1. So I will change the status from ON_QA to VERIFIED.
Re-verify this issue. Test version: rhevh-6.5-20140110.1.iso ovirt-node-3.0.1-16.el6_5.noarch Test steps: 1. Install rhevh-6.5-20140110.1.iso. 2. Select a NIC and configure it with IPv6 Static mode. Bootprotocol : ( ) Disabled ( ) Auto ( ) DHCP (*) Static IP Address : 2001::100 Netmask : 64 Gateway : 2001::1 Test result: 1. After step2, it can set IPv6 address successfully. This bug is fixed in rhevh-6.5-20140110.1.iso.
Change this bug back to ON_QA, due to this bug flag is changed to rhev 3.5, we need to test and verify this bug on rhevh 7.0 and node 3.1.
Test Version: rhev-hypervisor6-6.6-20141212.0.iso ovirt-node-3.1.0-0.34.20141210git0c9c493.el6.noarch Test step: 1. Install rhev-hypervisor6-6.6-20141212.0.iso. 2. Select a NIC and configure it with IPv6 Static mode. Bootprotocol : ( ) Disabled ( ) Auto ( ) DHCP (*) Static IP Address : 2001::100 Netmask : 64 Gateway : 2001::1 Test result: 1. After step2, it can setup IPv6 address as static mode successfully. So this issue is fixed in rhev-hypervisor6-6.6-20141212.0.iso. Also check no such issue in rhev-hypervisor7-7.0-20141212.0.iso. Change the status from ON_QA to Verified.
Since the problem described in this bug report should be resolved in a recent advisory, it has been closed with a resolution of ERRATA. For information on the advisory, and where to find the updated files, follow the link below. If the solution does not work for you, open a new bug report. https://rhn.redhat.com/errata/RHEA-2015-0160.html