Created attachment 404222 [details] Contains all of the files and command outputs together in case I can't find a way to attach them seperately Description of problem: During the boot process, the computer hangs just just after setting the host name. The last thing I see is the "Setting hostname... [ OK ]" line. Version-Release number of selected component (if applicable): 2.6.32.10-90 How reproducible: It happens every time I try to boot this kernel. Steps to Reproduce: 1. Boot using kernel 2.6.32.10-90 Additional info The hang occurs right after the "Setting hostname" line, which appears to be successful. Looking at logs from successful boots, this is approximately the point where LVM kicks in. I am using the default LVM setup from the graphical installer, and am attaching my fstab, the output of lvm dumpconfig, and the output from [pv,lv,vg]display. I removed all of the modesetting kernel parameters to allow me to see the boot messages and to eliminate the possibility of that being the problem. My current kernel line is as follows: kernel /vmlinuz-2.6.32.10-90.fc12.i686 ro root=/dev/mapper/vg_neuromancer-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us nomodeset Kernel 2.6.32.9-70, my backup kernel, boots with no problems whatsoever. The computer is a Dell Insipiron 9400 laptop. The output of lspci is attached. As far as I can tell, the boot process does not get far enough to actually write logs, but if there's somewhere that I'm missing, I will happily provide any logs needed.
Same thing for me. Dell Inspiron 1520, fedora 12 x84-64 seems to be affected too.
Same thing here on a Dell 2350. New install of F12 from dvd (works nicely) followed by yum update which installed 2.6.32.10-90 with identical symptoms as above. CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
This looks like a duplicate of bug 577463. can you check if the koji build mentioned in bug 578217 comment 8 resolves the issue?
*** This bug has been marked as a duplicate of bug 578217 ***
*** Bug 597117 has been marked as a duplicate of this bug. ***